Vba Find For 2 Criteria- Then Offset Other Information

Jul 4, 2007

I have a code where I am trying to do a find for 2 criteria. If both criteria are found in the same row I want to then offset more data on that row. My find code is not working. Here is what I have:

Sub test()
Dim str As String
Dim str1 As String

str = Sheets("Pt2Filter").Range("Repair_Description1")
str1 = Sheets("Pt2Filter").Range("DateOfInvoice1")

Sheets("Invoiced Pt 2").Activate
Find_Range = ActiveWorksheet

‘search For items
Set found_range = Find_Range("str", Columns("D"), xlValues, xlPart)
For Each Cell In found_range
If Intersect(Cell.EntireRow, Columns("A")).Value = _
"str1" Then...
End Sub

Whenever I try to run the code the part that I have as bold returns a Type Mismatch error.

View 4 Replies


ADVERTISEMENT

Find Value, Offset & Return Offset To TextBox

Nov 1, 2006

- Find a value on a sheet “ORM” in Column G5:G33

-Get the corresponding value of B5:B33 of that cell

-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.

-Place this canned remark in TextBox31

View 9 Replies View Related

Extending Formulas: Information About OFFSET And INDEX

Jul 8, 2009

I want to extend a formula like so- =Sheet2!M3
=Sheet2!M60
=Sheet2!M117

Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.

View 4 Replies View Related

Search Information On Pivot Table And Copy Value In Cells With Offset

Dec 5, 2011

I'm using a code to search some information in a pivot table and copy the value in the cells with offset(0,1) and is very very slow, I tryed another method with the using of Find but isn't working: error message: missing object in the with cycle.

Here is the working code:

Dim DataFine, DataInizio, UltimaRiga, Gg As Date
Dim NomeMacchina, Plant As String
Dim Cl As Object
Dim Pr As String
Application.ScreenUpdating = False

[Code] .......

Here is the code who doesn't work

For i = 6 To 500
Giorno = Sheets("OEE03").Cells(i, 2)
With Sheets("01")
Pr = Range("A5:A500").Find(Giorno).Offset(0, 1).Value
Sheets("OEE03").Cells(i, 9).Value = Pr
End With
Next

if I use this code on a normal sheet it works but when I try to use it on a Pivot table fields give me always the error message.

View 5 Replies View Related

Autofilter With Offset Criteria

Dec 4, 2011

This is the following code i have a problem with:

ActiveSheet.Range("$B:$J").AutoFilter Field:=1, Criteria1:=Sheets("Report").Cell(0, -2).Value

I am trying to filter items on a sheet called "all the answers" and i want to look up a value on the sheet called "Report" to filter.

The cell i want to filter is two cells to the left of the active cell on that sheet.

View 5 Replies View Related

Offset Function With Criteria

May 22, 2008

I would like a consistent OFFSET function formula across a row but my columns move from monthly to semi-annual periods at a point in time. How do I handle the move from monthly to semi-annual periods in my OFFSET formula?

View 4 Replies View Related

Offset Match (two Criteria Lookup)

Aug 7, 2009

In the attached workbook, the following formula appears in column B of the "dropdown" tab. I want to basically do a two criteria lookup, using the values in column A and the value of cell B1, which is a dropdown based on a dynamic range consisting of the company names on the Discounts tab.(starting with cell E1, extending rightward) To make this easier for testing purposes, I'm curretly using cell E1 instead of B1, which is just text.

It seems like this ought to work, but somehow it doesn't:

=OFFSET(Discounts!$B$1,(MATCH($E$1,Discounts!$C$1:$AA$1,0)),(MATCH(A5,Discounts!$B$2:$B$200,0)),1,1)

View 2 Replies View Related

VBA: Find And Offset

Aug 15, 2006

When I enter a number into cell E2, I would like this number to be searched from A5:A (there will only be 1 unique record, no repeats) and when found for the current time to be put into the corresponding B column.

View 9 Replies View Related

Offset And Sumif - Sum Certain Criteria And For Selected Months

Nov 30, 2011

I want to sum a certain criteria and for the selected months.

Example:

Column A January February March Total
Pen 20 30 40 90
Pencil 10 10 10 30

I want to have total of Pen for the months of Jan and Feb.

View 2 Replies View Related

Find Min Value & Offset By 1 Column

Nov 20, 2009

I have a list of names in col A and a list of numbers in col B

How can I write a formula that finds the minimum value and returns the name next to it?

I was trying something like Offset(min(b2:b20),-1), but it doesn't work.

View 9 Replies View Related

Find Occurrences And Offset

Dec 18, 2006

I want to find a string Variables via Find Method . Once this string is found, it will output the offset cell string. For example, in the attached file. i would want to find the string "ggg", once found the code will output the string "xxx"

I tried using the below code but it didn;t seem to work.

If Cells.Find(What:="ggg", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False).Activate Then
File_array(1,1,1) = Cells.Offset(0, -3)
End If

Msgbox(File_array(1,1,1))

View 6 Replies View Related

Find, Offset, And Update

Jul 22, 2007

Attached is a workbook that I am having a major problem with. Basically it is a stock management system for a hotel allowing purchase orders to be easily generated and receipted.

The purchase side is working as I want it to - so no problems there.

On the receipting side, however, I am having a lot of trouble. Here's what I want it to do.

For each item shown on the Receipt sheet that has a quantity in the received column, I want the code to find the appropriate line in the StockTotals sheet (using the UID which appears in column A of both sheets), then offset the appropriate number of columns, and update the numbers as follows;

Stock on hand grows by the number receipted.
Number on order drops by the number receipted.

If the number on order is now zero, then I want to clear the ordered cell as well as the ordered date cell next to it.

View 9 Replies View Related

Replace The Offset With Find Function?

Nov 25, 2012

I just want to replace the offset with find function. I have attached the sample file with the code. Just need a little change.

View 5 Replies View Related

Find 1st Cell With Numeral, Then Offset.

Apr 21, 2008

How would I find the first cell in column A containing a number, like HY42128PP, and then offset 1 row up from there to start my autofilter?

Also, to copy the worksheet headings, what code would copy all rows from row 1, down to 2 rows above the first cell in column A containing numbers, and insert those rows in another sheet?

View 13 Replies View Related

Find, Offset, Paste Variable

Sep 2, 2009

The initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?

View 3 Replies View Related

Find, Offset 0,-5, Create Formula

Jan 11, 2010

i'm working on an excel file that consists of 31 sheets one for each day of the week, the information about how much we make each day is inputted on the end of each day, i've consolidated all the sheets into 1 big sheet and now i want to create charts over the production, so what i would like is a code that searches the huge sheet for Machine name (Found in Column A and Column I) then walk 5 cells to the right and find the number of litre's made by that machine on that shift.

The different shifts are

Formiddagsskift - Morningshift

Ettermiddagskift - Eveningshift

Nattskift - Nightshift

I will include an example of the data. The data should be pasted to the "Formler" spreadsheet. It doesn't matter if you don't wanna do this i can simply do it later i just need the code to search, and go 5 cells to the right and remember which cell it is, and make sure it is in the right "Shift" ie, all the 282 machines for morningshift are summed in c7 and c10 has eveningshift and c13 has nightshift.

Quite time consuming to search through 31 days of production to find the correct machines on the correct shifts. And the data changes for each month so this would be a great asset to me.

View 13 Replies View Related

Combining Offset And Find Formulas

May 13, 2013

On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.

View 3 Replies View Related

Lookup - Match - Find - Offset

May 2, 2006

on sheet 1
I have a list of race car numbers (20K, 15W, 2) in A1:A50 (may be more or less than 50)
Next to them in B1:B50 are the point values they earned for a night of racing. 100-97-94 etc.... these are points they have earned for a night of racing that week.
in C1 I have how many column over I need to write to (ex. 4 for Column "D" on sheet 2)

On sheet 2 I have all the total for each week.
example
A1 B1 C1
Car 4/22 4/29
20K 94 90
15W 97 100
......

What I need is some code to go down the driver list on sheet1 and write their points in colum D on sheet 2 when it finds the appropriate car number. If the car number does not exist then add the car to the bottom of the list (A50) or whatever, and write the points 4 columns over.

View 6 Replies View Related

Find Specified Values. Offset & Cut/Copy

Aug 2, 2006

I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.

16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........

View 3 Replies View Related

Find Dates, Offset & Copy

Jul 7, 2007

My source data generates a sheet full of individual dates and condo rates. We'll call it the "Rates Tab". The dates are not sorted or organized into a single column and to complicate it further the data has blank rows periodically. The only recognizable pattern is: (example) the date is in cell b12, then the condo rate will be 2 columns to the right in d12. On a separate sheet, the user will input a check in date(date A) and check out date(date b). I need to find the rates for all dates from Date A to Date B located on the Rates Tab. how to find a Date across various columns and then return a value 2 columns to the right from the "target"?

View 6 Replies View Related

How To Filter Information Based On Two Criteria

Apr 29, 2014

I have been struggling hard to pull information out of a table using vlookup and match & Index functions. It does not seem to be working. Below is my criteria:

I have a data of call centre agents with names , dates and calls offered answered details. On another sheet i have given a list of names of agents in a drop down list and all the dates of the week. Now i want that when a user selects a particular agent name from the drop down list, the data fetched under '07042014' date column is against the number of calls answered by the selected agent on this date. I have 5 columns of title '07042014' , '08042014', '09042014', '10042014' and '11042014' Capture.PNG. Attach is the file how it looks like.

How to use match and index function or any other function to fetch information against this date as per the agent selected.

View 3 Replies View Related

Offset: Find The Last Value Cell In A Row And Display Its Contense

Jan 21, 2010

I need to find the last value cell in a row and display its contense. Is OFFSET the best way of doing it? Cell H3 will need to contain the formula and the row to seach is also row H. In H3 I want the value that is found in the right most cell on row H that contains anything.

View 3 Replies View Related

Find, Offset & Copy To Another Column Via Macro

May 21, 2009

I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.

View 2 Replies View Related

VBA - Find Select Offset Copy And Paste

Aug 23, 2012

I am trying to achieve something like this :

Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.

This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.

View 5 Replies View Related

Find Value & Return Contents Of Offset Cell

Sep 3, 2006

On Sheet2 I have a table where I want M2 to do the following:

1.) Look at cell A2 where the name "John" is and B2 where the name "smith" is.

2.) Look at sheet1 and look in B2 and C2 for "John" and "smith"

3.) Once it matches the name, place the contents of sheet1, cell I2 into sheet2, cell M2.

So in short, match the name on sheet2 to the name on sheet1 and return the number in I2 to M2 on sheet2.

Maybe combining the persons name in to one column would make it easier?

View 9 Replies View Related

Find Value & Return Offset Cell Content

Nov 13, 2006

I would like to be able to find all cells in row 2 that are "greater than 0". Then I would like to return the coresponding job number in row 4. I need to create a list of each job with the number of hous spent on that job next to it. I may have 30 different jobs but only 5 jobs that have hours for the specific week.

How I attemted to solve this is to create a table that listed all the hours from the largest number in row 2 to the smallest. Then I found the job number corresponding to that number of hours. The problem with this meathod is that if two jobs have the same amount of hours then the first job number is returned for both values that are the same. See attached example.

View 5 Replies View Related

Find TextBox Value Occurrences On Sheet & Offset

Jun 7, 2007

i've got two textboxes and a command button on a userform.

Textbox1's value is "A" Textbox2's value is "B".

On commandbutton_click, i'd like to search down column P for textbox1's value.

then offset -5 to column J and insert textbox2's value.

Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.

I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.

View 8 Replies View Related

Find & Use Cell Address To Offset On Another Worksheet

Jul 27, 2007

I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.

How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?

For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range

LineID_Value = LineID.Offset(0, 8).Value

'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then

ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value

'End If
End With

Next LineID

View 3 Replies View Related

Find Match In Column & Offset For Return Value

Sep 2, 2007

i tried using the lookup but it gave a different result. i want to search a value from sheet1 A to sheet2 A and copy the remarks from sheet2 B and paste it to sheet 1 B and if not found leave it blank.

here's the attach file i just trim it down.

View 5 Replies View Related

Find Text & Offset By Found Value Row And Column

Apr 16, 2008

I'm writing some code where I need to know the column in which a specifc text string occurs. Because of the nature of the sheet, the string will only appear in one column, but that could be in almost any column on the worksheet.

For example say the text string is "Year 1", I need to find the column with this string, and then offset down to a predetermined row, or offset over to the appropriate column (something like below).

With Selection
.Offset(0, x).Select
If List.Selected(0) = True Then
y = i - 1
With Selection
.Value = Salary * Inflation1 ^ y
End With
Else

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved