Writting Number From Columns In Reversed Order
May 16, 2009I have this situation: ...
View 7 RepliesI have this situation: ...
View 7 RepliesI have two sets of columns in this chart, and two lines on a secondary Y axis. But the first set of columns have their colors reversed. How do I fix this?
Screenshots below: [URL].....
[URL]....
I have a column of figures in a file sent to me recently which are dates but for some reason have been reversed eg 20140321. This is 21st march 2014. However I have tried formatting the number as a date (as we would normally see it in UK eg 21/03/14 or similar) and I cannot get Excel to recognise it as a date - I just get a long row of asterisks. How do I get a recognisable date sequence?
View 6 Replies View RelatedI need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I have this spreadsheet with a list of products and their components in the sheet called "product_list" this information is downloaded from a plant pc in this format. to make it more readable and easier to edit i've made the "mix formula" sheet that using vlookup finds the product by product code and brings through only the relavant information. The problem is if you want to alter this information you have to try and find the relavant cell in the "product list" sheet. What would be easier is if you can edit the relevant info in the "mix formula" sheet and it would change the data in the "product list" sheet. Is there a way of doing this? I've attached the spreadheet with the relavant data to demonstrate.
View 2 Replies View RelatedI want to copy a range. I have enteren the following code
Worksheets("administration").Range("A1:H20").Copy
The problem is that i want to copy a range by writting cell numbers like from 1,1 to 20,8.
What I am trying to do is rank my employees based on certain metrics. They are weighted in three different catagories. Talk time is 40%, Quality 50%, Attendance is 10%. I can weight the Talk Time and Quality, as those are basically the higher the score the better the weight. Attendance is the opposite, the lower the number, the higher the weight. Meaning, if employee has 1 absence that would better than someone who is at 4 absences. Is there a way to do this. I am somewhat educated on VBA, I understand if,then,else statements and/or Select/Case statements, so if I needed to do it in VBA I can. I just need direction to get it going.
View 3 Replies View RelatedI have some stock market data with an odd date format.
As an example, January 04, 1915 is represented as 150104.
How can I convert this number to a standard date format?
I attempted to use the Concatenate and Left and Right functions.
The Left and Right functions will not accept the 150104 digits and they display #Value!
I am using Excel 2003.
However, those two functions do work if I precede the 150104 digits with a text character.
Example: x150104
When VBA copies from a .csv spreadsheet to an excel spreadsheet, the days/months in the date become reversed. So 12/5/2009 becomes 5/12/2009.
View 3 Replies View RelatedBasically, I have two columns:
In column D I have some postcodes, and in column E I have areas. They are all with their according area, but I have them mixed up.
So: How can I put Column E in alphabetical order so that Column D shifts accordingly.
Example:
POSTCODE1 --- North West
POSTCODE2 --- South East
POSTCODE3 --- North West
I want it to shift them so it ends up like this:
POSTCODE1 --- North West
POSTCODE3 --- North West
POSTCODE2 --- South West
I have trying to remove duplicate value for two columns which are not in order since long time. I have listed an example for the purpose. Two rows contains same information in different columns. I just wanted to have one row and remove the other with same information.
AAAA
500135500136
500136500135
500137500138
500138500137
500191500192
500192500191
500277500278
500278500277
500413500414
500414500413
I'm creating an order form in excel. I would like to add a control there where when it's triggered, excel would automatically assign a number that hasn't been used before and save the file using that number. It's like an order number generator.
For example, let's assume I'm entering a purchase order in excel. After I'm done doing that, I click on the "SAVE" control button. This will assign the number following the last saved order and save the file in a location I specify in this format: filename POnumber.
I have a list of unique number. They are part numbers. For convenience for the user, they cannot be resorted. A list may look like this:
AAAA
BBBB
AAAA
AAAA
CCCC
(blank cell)
CCCC
What I would like is a formula that i can put in the adjacent cell that will result in the following:
AAAA 1
BBBB 1
AAAA 2
AAAA 3
CCCC 1
(blank cell)
CCCC 2
Essentially, the formula/solution will "know" that the third occurence in the list is actually the 3rd occurence, and so forth... I tried COUNTIF but that just gave me the total number of occurences
AAAA 3 wrong
BBBB 1
AAAA 3 wrong
AAAA 3
CCCC 2 wrong
(blank cell)
CCCC 2
We have list for entries that is shared among few people. In that list, we manually add number for the entry. So if I input 99 then, next person should add 100 and so on. I would like to automize this, so say If I use this, then no one else can use it in the mean time and then when number is input, it should disallow if same number is input and it should automatically enter the next number.
View 3 Replies View RelatedI want to use data validation to enforce that every cell is greater than the next cell in that column. I've tried using =OFFSET(A:A,1,0) thinking that it'll return in next one, but no luck.
View 3 Replies View RelatedAS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
View 5 Replies View RelatedAs an part of QA activity
1. first I export data and directly paste in the "RAWDATA" Sheet.
2.There are 50 columns and each has header like Clientname,date,Id,campaign,websitename,frequecncy etc.
3.Exported data does not have same order
4.so when I paste data in excel I check manually if orders are in correct or not?which takes my long time to review/manually check
Using macro or something else to review the order and if any discrepancy then raise error? Need Excel to check order of columns ?
I want to export some columns of my worksheet to a csv-file. But i don't want to export all of them, i just need for example: Columns B, D and G and inside the csv-file they should be in an different order like G, B, D .
I already thought about using "union" to select the specific columns, but i can't get this to work.
I have a sheet diplaying 5 columns of percentages which I need to rank in descending order, i.e. assign rank 1 to the largest percentage and 5 to the lowest. See the attached sheet.
View 2 Replies View RelatedI have a question about putting data in the right order. I have this order in my excel files:
City A, City B, City C
10 20 20
20 40 50
15 30 40
45 20 10
50 10 10
20 30 40
I need to put them in order from top to bottom like this:
10
20
15
45
50
20
20
40
30
20
10
30
20
50
40
10
10
40
Is there any way to do this in a fast way. Because I have 440 cities and 13 numbers per city copying and pasting will take a long time..
I have a couple of Pivot Tables that I create each month summarising my Income and Expenditure. The only problem I have is making the columns appear in the correct order, i.e. where July is month1 through June(the following year) being month 12 to coincide with my financial year. Oddly enough last month (January) was fine, following December.
This month January and February appear in columns 1 & 2.
I have an upholstery business and I have created a workbook containing multiple sheets (proposal, invoice, sales order log, etc.. ) Following, I have saved it in Template format, which I open and save by order number somewhere else. The issue is, I don't know how to track what the last order number I used was....
Is there anything I can work using excel that will allow me to make that easier without having to go open a window and looking at the last order number after arranging the workbooks by name inside a folder?
I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
View 9 Replies View RelatedI am trying to number rows based on criteria. when the value changes add a 1. This is what I need to have happen
Apple - 1
Apple - 1
Apple - 1
Orange - 2
Orange - 2
Plum - 3
Plum - 3
I can get an if statement to number everything 1.
I am working on a spreadsheet with multiple tabs. The basic idea is that I will pull some raw data and paste it into my first tab, and then I can refresh all of the other tabs to reflect the newly imported data. I had a problem recently because when I attempted to pull the raw data because the number and order of columns had changed which messed up my cell references.
My other worksheets would contain cell references that said =table1!a1, and I would drag that formula down to have a list of all employee names for example. I would then filter data based on some of the other information in other columns. I was hoping that I could paste the newly exported data into that table and reapply the filters to view the new list of employees. How can I do this even if the order or amount of columns change? This spreadsheet will be used many times by different people so I need to make it scaleable in case the format of the exported data continues to change. I tried to change the raw data into a table and change the cell references to the column name, but it did not work when the order of the columns changed.
I have a large order spreadsheet with 3 date related columns. One for customer requested delivery date, one for factory quoted delivery date and one for actual delivery date.
I want to be able to set something up that if it gets near either the requested or quoted delivery date (by say a week), that the cell flags red so it's a visual reminder to check whether the order has been dispatched etc.
I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in.
The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.
View 5 Replies View Relatedi would like to rank a column so that when entering a number in a cell it will move up the column so that the greater number falls down the colum and the larger rises up the column
ie
list
6
5
7
8
9
1
3
2
4
------------------------
list
1
2
3
4
5
6
7
8
9
I am trying to develop an invoicing system for my company. Most of our customers will have their invoices formatted a certain way which has been relatively easy to solve, however one customer needs to have their invoices formatted in a special way.I have a sheet that pulls in a list formatted like this:
Date product order number kilos
07/4/14 48% cream 445600 1000
07/4/14 PHM 445600 1500
07/4/14 PHM 445600 1000
07/4/14 PHM 445600 2000
10/4/14 48% cream 445800 500
What I need it to display is the following:
Date Product order number kilos
07/4/14 48% cream 445600 1000
10/4/14 48% cream 445800 500
07/4/14 PHM 445600 4500
So you can see it is grouping the invoice by both product type and order number but grouping by product.