Auto Add Rows With Difference Names?
May 4, 2014
I found a code on here to add a row automatically, and it works ok... however on the same sheet i want to have difference people on the left , with tasks etc to the right of the person.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Row = [TotalVal].Row - 1 Then Application.EnableEvents = False [TotalVal].EntireRow.Insert Application.EnableEvents = True End IfEnd Sub
I want to add tasks to each persons name and as the tasks grow a row is automatically added for that the next task.
so say i have 10 people on the column A with a row between them going down. i put the name (above A1) Then in the space/row i left after the first person i put the "name" so it has an end to find.
For the first name it works fine, i fill out a task and it moves down automatically.... when i go to the next name I cant get it to work the same as the first person, and wont allow me to use same name either.. so i am at a loss how to adjust the code for each name on my list so as tasks are added it moves down a row.
View 1 Replies
ADVERTISEMENT
May 8, 2009
In the below table, I was trying to get the difference in ColB corresponding to Names in ColA..
ColA ColB ColC ABC 28 1 MNO 12 1 ABC 27 1 ABC 26 2 ABC 24 1 ABC 23
XYZ 16 3 MNO 11 1 MNO 10 1 MNO 9 -1 MNO 10
XYZ 13
?
View 9 Replies
View Related
Apr 15, 2014
Reference the attached excel audit example. Column F highlighted in Yellow is finding the difference between "Authorized Post Allow" D9 "Post Allowance" B9 . The Column location of the two Columns changes on each audit. This means I have to manually fix the formula in Column F every time. Is there a formula that would find the difference between these two columns based on their names "Post Allowance" and "Authorized Post Allow" preventing me from manully fixing the formula.
View 2 Replies
View Related
Aug 11, 2006
I have 2 ranges named MASTER and SUBSET and 1 range named ANSWER. I want to compare ranges MASTER and SUBSET and copy the difference to ANSWER. The ranges have the same number of columns but different number of rows. Sample data is below.
Ideally, I would like a VBA solution executed from a userform button.
Example:
MASTER
aaa apple
aab banana
aac grape
SUBSET
aab banana
ANSWER
aaa apple
aac grape
View 5 Replies
View Related
Mar 12, 2013
I want to enter a name in a cell from a list of 70 names I have on another work sheet. By just typing the first few letters of the name into the cell I need it to complete the entry. I do not want to use a drop down box it takes too long to find the name. I need a formula to do this for my spread sheet.
View 6 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell?
View 13 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell? There is only one column of data.
View 1 Replies
View Related
Jul 13, 2013
I'm looking for one macro code in order to generate the excel files and give the standard excel file names.
Example: I have one master file in the given path like C:Temp and input box required to assign the number of file option. If I declare 10 files then my master file should get 10 copies and save it the above path....
View 2 Replies
View Related
Jun 29, 2007
B20 is the number that the user enters. It can be any number and it will create new sheets below and text of sheet name in B21:F21.
If i change the sheet name below, B21:F21 would also automatically change.
View 9 Replies
View Related
Jul 29, 2014
How to show via a message box the difference between rows 2 and 3 on a worksheet (row 1 is headers).
In the message box per the attached workbook, i should only see something like the following....
Drawing Rev was A is now B
Planner was Joe is now Fred
The attached example is abbreviated, the actual data will span multiple columns (approx. 30 - 40)
View 7 Replies
View Related
Oct 3, 2011
I am trying to write a spreadsheet to accomplish the following function. One column (column a) will be data in which there will be consecutive entires of the same value. There will be a seperate column (column b) of data which is related to the first. I want to create a third column which calculates the difference in the values in column b, which correspond with the first row, and last row of a consecutive block of column A values.
I was thinking the simplest method would be to calculate a given row's difference between the first row of the block. The only problem Im having is determining where a block begins, since the will be multiple occurances of blocks of data.
View 7 Replies
View Related
Aug 7, 2013
I have a data table with incidents in which one column is equipment number and one is data of occurrence. I now need to calculate how long ago the same equipment number occurred.
View 2 Replies
View Related
Nov 8, 2012
I have sheet1 that contains rows with names. I want to match those row names with the column names in sheet2, and then delete any column in sheet2 that does not match to sheet1.
View 2 Replies
View Related
Jun 27, 2008
I have a code that goes through and deletes everything that doesn't contain a certain word, but I have several words ( Names actually) that I need to keep in my sheet, but all others can be deleted, along with their rows...the names are on in Column B...there are about 11 names currently and probably be adding a few more next month...This is a macro that is set for work to go through like I said a lot of Rows and delete all them but those that have the names of the workers I need to keep in the sheet...the names are scattered throughout, which is the reason for a need of a macro to do it for me cause it takes me forever to manually do it each day...The code for just one person I can't get to do multiple names so this is what I came up with based off what I know plus reading hundreds of pages on the net regarding similar style needs, but none exactly the same....
This is the Code that I'm trying to use but unfortunately I get Type Mismtch Error 13 ( I think it's error 13)...what am I doing wrong? (I only am working with one sheet that contains all the data...
Sub SortOutMyTeam()
Dim wst As Worksheet, wstNew As Worksheet
Dim rData As Range, r As Range, rTotal As Range
Dim avNames() As Variant
avNames = Array("Name1", "Name2", "Name3", "Name4", "Name5")
Set wst = ActiveSheet
Set rData = Range("B1:BL" & Cells(Rows.Count, 1).End(xlUp).Row)
Application. ScreenUpdating = False
wst.AutoFilterMode = False
With rData
For i = 0 To UBound(avCrit) Step 2
. AutoFilter field:=3, Criteria1:=avNames(i), Operator:=xlOr, Criteria2:=avNames(i + 1)
On Error Resume Next
Set r = .Offset(1, 0).Resize(.Rows.Count - 1).SpecialCells
View 5 Replies
View Related
Nov 6, 2013
Having an issue with an array formula.
{IFERROR(INDEX('sheet2'!$A$2:$A$14,SMALL(IF('sheet2'!$C$2:$C$14="X",
ROW('sheet2'!$A$2:$A$14)-ROW('sheet2'!$A$1)),C$2),1),"")}.
Originally I did not need to skip any rows, but now I have to skip certain rows. I've tried using my current array formula and skipping the rows not needed but can't get it to work.
{IFERROR(INDEX('sheet2'!$A$2:$A$5,$A$9:$A$14:SMALL(IF('sheet2'!$C$2:$C$5,$C$9:$C$14="X",
ROW('sheet2'!$A$2:$A$5,$A$9:$A$14)-ROW('sheet2'!$A$1)),C$2),1),"")}.
Can this still be done with an array formula? I need to skip rows 6, 7, 8. Not sure what I'm doing wrong but no names are appearing. Sheet 1 looks like this with "Job Titles" starting in A2 on sheet1.
Job Titles
Dept.
1
2
3
4
Claims
CSI
Outb Calls
CSI
Notifications
CSI
Evaluator
CSI
I tried a new formula in cell C3
:=IFERROR(INDEX(Sheet2!$A$2:$A$14,SMALL(IF(ROW(Sheet2!$C$2:$C$14)=9,
IF(Sheet2!$C$2:$C$14="x",ROW(Sheet2!$A$2:$A$14)-ROW(Sheet2!$A$1)))),C$2),1),"") entered as an array.
I should see the name "C. Pepper" followed by "L. Smith" when I copy the formula to the right into D3, "J. Rast" would be skipped as these are the rows not being picked up, but nothing is showing.
Sheet 2 looks like this with "Staff Name" starting in cell A1:
Staff Name
Mgr
Claims
Outb Calls
Notifications
Evaluator
A. Hawkins
Adams
[Code] ..........
View 3 Replies
View Related
Aug 15, 2007
Suppose I have in A1, names of people seperated by comma....
James Dean, Bruce Lee, Marilyn Monroe, Tom Cruise, etc
How do I break them into rows like
James Dean
Bruce Lee
Marilyn Monroe
Tom Cruise
View 9 Replies
View Related
Oct 22, 2008
I want to autohide any row that does not have a number in the Current # of Bins column.
View 2 Replies
View Related
Jan 4, 2007
I have a requirement where, in one of the column i would like to have an auto numbering (similar to Microsoft access). I know this can be done using Macros, but is there any other better alternative.
View 4 Replies
View Related
Jun 4, 2014
I have a data set where the row headings repeat a lot. I have 5 headers repeated probably 30-45 times each. Eg. Truck, Car, Van, Tank, House, Car
At the moment I am using the formula...
=INDEX($B$2:$M$45,MATCH($O$2,$A$2:$A$45,0),MATCH(O4,$B$1:$M$1,0))
which will only return the result of the first occurrence of the cell it is looking for (for eg. I am looking for the values in the cells in columns labelled 'Car', is it possible for it to look past the first occurrence in the data set and find all the values?
View 12 Replies
View Related
Apr 12, 2012
I have a single column with multiple rows of data like this: Afirst last, Bfirst last, Cfirst last (all in one cell) etc.
I want to type some names in one cell in the same format (Afirst last, Cfirst last, Bfirst last) but not order and then check if any of those names exist in the first column and count the results of matches.
So in this example I am looking to count Bfirst last and/or Cfirst last in every cell of column A. I need to use a formula.
View 2 Replies
View Related
Jan 26, 2010
I've got a list of donor names, names listed multipled times in Column A, each row with different donation data. For instance:
Sheet 1
A1 - Mary Jones, B1- Internet Donation
A2 - Mary Jones, B2 - Silent Auction Purchase
A3 - Mary Jones, B3 - Event Ticket Purchase
A4 - Gary Jones, B4 - Foundation Grant
A5 - Gary Jones, B5 - Internet Donation
A6 - Sara Parker, B6 - Event Ticket Purchase
I want Excel to compare rows A1 and A2, and if the name has not changed, enter the donation data from Column B into another sheet that will just list that person's name once:
Sheet 2
A1 - Mary Jones, B1- Donation1, C1 -Donation2, D1 - Donation3
A2 - Gary Jones, B2 - Donation1, C2 - Donation2, D1 - Donation3 (which would return no value because there the name changes
Does this involve IF, MATCH or VLOOKUP formulas?
View 9 Replies
View Related
Oct 24, 2005
Can I automate an excel worksheet such that if ,say, "436" is written in a
certain cell it shades that row yellow, or if "437" is in that cell it
shades the row blue. It would then be easy to visually tell in an excel
chart which lines belonged to ,say, specific companies.
View 9 Replies
View Related
Apr 6, 2014
I'm using the following code to hide rows with zero values in my workbook. I have 10 sheets for potential data/products and a "summary" sheet that is set up to pull all the information from the 10 sheets. I often don't use all 10 sheets so there are a lot of blank cells. I set up the code below to hide zero values to make the "summary" sheet easier to work with. I am encountering a problem with cells that are formatted as dates. a zero value/empty cell shows up as 1/0/1900 and is therefore not auto hidden.
Either any adjustment to my formatting or code to automatically hide these blank date cells on the "summary" sheet?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)Dim c As Range
For Each c In Range("C3:C8778")
If c.Value = "0" Then
c.EntireRow.Hidden = True
[Code] ...........
View 4 Replies
View Related
Dec 15, 2008
I'm using this VBA code which is hiding cells in rows 59:111. Some of these cells have formulas and some don't.
Private Sub Hide_Unhide()
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
For i = 59 To 111
Rows(i).Hidden = (Cells(i, "b").Value = 0) + (Cells(i, "b").Value = "")
Next i
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
Here is the problem I'm running into: I want this to run in the background so the user won't have to click anything to hide/unhide the cells whenever the options in the drop down list are changed and the data expands/collapses.
View 9 Replies
View Related
Sep 14, 2007
I've got a report that is filled out every day and submitted to the VIP's within the company.
They normally just open the file, press print and read the hard-copy.
Quite often the text of the column is larger than the cell size and the text is cut off.
View 7 Replies
View Related
Feb 14, 2014
I'm working on a spreadsheet that tracks project accepted and done over a course of time. I am expecting the data to eventually reach the thousands in a year's time. I have several formulas in specific columns that I need to replicate as the user enters new data into the next row.
While it is easy to copy paste the formulas from the cells above, we are looking to save time by having the sheet do this automatically which also prevents the user from accidentally deleting/modifying the said formulas. I am also looking to save file size which is why I am considering doing this in VB. An example of a formula that I need to move down into the next column is:
=IF(ISERROR(VLOOKUP(C2,Tables!A:B,2,FALSE)),"",VLOOKUP(C2,Tables!A:B,2,FALSE))
I am new to VB but would like to gain some understanding on how this works.
View 2 Replies
View Related
Mar 18, 2014
I'm trying to find a way of hiding every sixth row on my sheet, however, no matter what i try I can't seem to get it to work.
I want to be able to click a macro button that will auto hide every sixth row. But I don't want to have to input every row reference in VB.
View 5 Replies
View Related
Jun 2, 2009
I have an excel spreadsheet in which I would like to number the rows in column B from row 4.
Code I wrote:
View 7 Replies
View Related
Jan 28, 2012
In sheet 1, I have a list of data in A2:D21. In sheet 2, I have formulas in the same range that "paste link" the data. If, there is no data entered in any entire row of the same range in sheet 1, then I want the entire row to hide automatically in sheet 2. In fact, unless there is something entered to start with, I do not want any of the rows to be visible. Is this possible and how?
View 2 Replies
View Related
Apr 1, 2013
I am creating a copy of a spreadsheet (table format) in a separate workbook using formulas that will update the copy as the original updates. I would like to auto hide the rows that have the value "Returned" in column G. I have columns A - G , rows 2 - 2000. The value "Returned" is the result of a simple = formula. Is there some way to accomplish this?
View 4 Replies
View Related