Auto Numbering .. Number The Rows In Column B From Row 4
Jun 2, 2009I have an excel spreadsheet in which I would like to number the rows in column B from row 4.
Code I wrote:
I have an excel spreadsheet in which I would like to number the rows in column B from row 4.
Code I wrote:
I have a requirement where, in one of the column i would like to have an auto numbering (similar to Microsoft access). I know this can be done using Macros, but is there any other better alternative.
View 4 Replies View RelatedI have a column that is listing steps in multiple processes. I have each step 1 marked with a number 1 and would like to have a macro run that will read the column and when it sees a 1 move down to the next row and insert a 2, 3, 4, etc. until it hits the next 1 and then repeat the process. I am unsure how to build this as I am just starting to learn some VERY basic VB scripting.
View 5 Replies View RelatedI would like to know if there is a way to Auto number a text.
I have a column with text tags (lets say Column B). These cells look at a specific cell (ex. A1) and see what text is written in it then copy the text into their own cells B1, B2, B3 and so on. So if cell A1 reports AAA then Column B cells become AAA all the way down.
Now what I like to do is for column B cells look at A1, copy the text and add _01 infront of their copied text. so for Column B, B1 reports AAA_01, B2 is AAA_02, B3 is AAA_03 and so on
i have formulas in a range L5:L15 which sometimes return some value and
sometimes zero. i want to give them auto numbers in column M in a way that it
should only count the cell which has some value.
suppose formula in L5 returns some value, L6 also then L7 & L8 have no
value(but formula persists), cell L9, L10, L11 has values then L12 has no
value L13, L14 has value and L15 has no value (but it has formula in it)
values in these cells changes and some goes to zero and some return values.
now i want to give them Auto Numbers in a way that cells with some value
should only be considered.
Is there some feature that lets you auto number cells? IE (1-20) Instead of me having to manually type in 1-20 in each cell or making my own formula up to do it.
View 3 Replies View RelatedI have a form that I use often, but numbering is slow because I go in and number the form, print, go back and put in next number, print, etc. Is there a macro or formula that will automatically update the consecutive numbers when I enter or print?
View 13 Replies View RelatedI want to create a template in Excel for a change order system. Every time I have a new change order I want it to be numbered. I want Excel to automatically keep a log of all the changes orders to date with change order number, date, title, etc.
View 9 Replies View RelatedAfter applying subtotal function based on city, i have blocks of data with subtotals at different places. if i want separate numbering starting at 1 for each range , what i have to da. at present i am doing it manually ...
View 6 Replies View RelatedI have just successfully added a code to Visual Basic in order for it to insert a sequential number automatically upon opening the worksheet. It works great, but how do I restart the numbering now that I know it works?
View 9 Replies View RelatedCould someone give me the exercise to be followed to create auto numbering in invoices in Excel as same urgently required.
View 9 Replies View RelatedAuto-Numbering
just an example:-
56
57
58
59
60
The Column above is the first column on a selected sheet.
i will select 56 and from there (End-Shift+Down arrow) which selects all the values from 56-60...
My question is from here on if there is a shortcut key or 'vba macro' that can autonumber from 1.
Thus giving output result of..
1
2
3
4
5
i want to record the solution for above problem in a macro recorder for different numbers that is why i have to do (End-Shift+Down arrow)
I have created a bill of lading form that we use in shipping. Each time they need a new form, they copy the "blank" form. Is there any way to have these forms "auto-number"?
View 7 Replies View RelatedI've Created a workbook with 30 sheets, and i want to make
auto numbering for each sheet .
Ex:
if i put in sheet "1". cell"A1" = 100
the sheet "2". cell "A1" = 101
sheet "3". cell "A1" = 102
and so on ...
Many people use Excel to generate forms that will be printed off and carried around on a sheet of paper, because the boxes and lines are nice and square, and straight, Word is not so co-operative
There have been lots of queries how to auto-number such forms, so that you can later file or issue them in a particular order, or use the numbers later as a reference doing other stuff.
Here's what I want to do:
I run a limousine service taking clients from places like hotels to various destinations
I have a little travel voucher form, to be filled by hand, 3 copies to a sheet, so we are gonna print them, and cut the page into 3 lil vouchers. Like printing lottery or competition tickets. The vouchers have artwork to suit the place requesting my service.
They are NOT invoices, to be opened, numbered, worked on, and THEN printed
Cell G2 will start autonumbering at 1001, Cell G18 would be 1002, Cell G34 would be 1003, then when the second page prints, we get 1004, 1005, and 1006 respectively. Each sheet has to be individually cut and stacked
Alternately, we decide a quantity to print (50) and start G18 at say 1050 and G34 at 1101. This would be better, because when cutting the paper up with a guillotine, the first 50 vouchers are already in number order, the 2nd 50 get stacked under them, and finally the 3rd 50 below that, so now my stack of vouchers runs from 1001 to 1150 nice and easy and neat
A drawback with this is that I have to do specific print runs and somewhere in the document, specify the starting number for G2
I have heard of a method to print, say 20 forms, starting say, 1001, ending 1020 and a text file saves the last number used, so the next print run picks up from there, at 1021, can that method be combined in? I'm working in a small office that needs these vouchers but we dont wanna have a commercial printshop tool up (big $) to do small print runs
I can also do the vouchers for other suppliers to use with different artwork
Looking for a way to print out a worksheet with auto number while printing. The worksheet does not have a header or a footer and contains needed information.
View 4 Replies View RelatedI have sets of data that need to be numbered example:
B21N232E6Q1B21N232E6Q2B21N232E6Q3B21N29VFAL1B21N29VFAL2B21N29VFAL3B21N2ISFHJ1B21N2ISFHJ2B21N2ISFHJ3B21N2ISFHJ4
How to make auto numbering with mark "-" combination and result placing in D column, like this below ;
row/line
col.c
col.d
col.e
15
john
-
xxxx
[Code] ........
I have list of data with corresponding number of chances ( see attached column E) I need to replicate the data under column A,B,C & D to a new rows as per the number under column E and so goes till the end of the list using a formula.
Basically in the attached example i should have a 43 new data rows
I have got 2 sheets:
- list (list of transactions)
- accepted (accepted transactions).
I want to make macro, which will:
1. select max value from sheet.accepted "B:B"
2. enter max value +1 in sheet.list "B8"
3. automatic fill down from B9 to the end of list with number increasing by 1 (in B9=B8+1, in B10=B9+1 etc.)
I tried with this:
I've got a report that is filled out every day and submitted to the VIP's within the company.
They normally just open the file, press print and read the hard-copy.
Quite often the text of the column is larger than the cell size and the text is cut off.
I have dynamic number in K2. How to make numbering list whose length is based on that K2 number? I want that list to start from A2. So, in other words, if K2=3, the list should be like this:
A
empty (cause my header will be there)
1.
2.
3.
Notice that there should be period after each number too.
I tried to make attached worksheet self-explanatory. find attached.
Basically, I want to number group of rows based on a logic (blank A,B, and C columns)
inincubus.grouprows.xlsx
I have a file containing data which is about 6000 rows deep by 15 columns
There is a column which has a number in each row which starts at 1 and going down to 100
I want to continue this down to 6000 and I know I can put the little cross at the bottom side and drag it down if I like
Any faster way to do this like a keystroke shortcut.
I'm working on a spreadsheet that tracks project accepted and done over a course of time. I am expecting the data to eventually reach the thousands in a year's time. I have several formulas in specific columns that I need to replicate as the user enters new data into the next row.
While it is easy to copy paste the formulas from the cells above, we are looking to save time by having the sheet do this automatically which also prevents the user from accidentally deleting/modifying the said formulas. I am also looking to save file size which is why I am considering doing this in VB. An example of a formula that I need to move down into the next column is:
=IF(ISERROR(VLOOKUP(C2,Tables!A:B,2,FALSE)),"",VLOOKUP(C2,Tables!A:B,2,FALSE))
I am new to VB but would like to gain some understanding on how this works.
I am trying to work out how to automaticaly fill in the next number in a sequence of bespoke numbers like this in column B 1012-0153-70, next 1012-0153-71, next 1012-0153-72 and so on so when i click on the next open cell in column B it adds the next number in the sequence
I have the following VBA code in my Sheet:
Private Sub Worksheet_SelectionChang()
With Range("B" & Rows.Count).End(xlUp).Offset(1, 0)
If Target.Address = .Address Then
.Offset(-1, 0).AutoFill Destination:=.Offset(-1, 0).Resize(2, 1), Type:=xlFillDefault
End If
End With
but nothing seems to work. i also have the following VBA code on the same sheet:
Private Sub ComboBox1_Change()
End Sub
Private Sub Calendar1_Click()
[Code].....
I would like to insert rows into column A from column D based on the count values and without affecting subsequent values in column B and C. For example. Count of a value in column A =1 and count of that same value in column D=5, THEN 5-1 (count of D - count of A) insert 4 rows in column A (shift cells down) without affecting data in column B AND C. Basically making the counts in column A and D equal.
COLUMN A
COLUMN B
COLUMN C
COLUMN D
G250001
[Code]....
The above example should look like this -
COLUMN A
COLUMN B
COLUMN C
COLUMN D
[Code]....
I have to create a spreasheet monthly that has perhaps 60 transactions. The data is in columns A - G, with columns E and F having the costs figures. I need to sum the value in column E and also in Column F every few rows. The problem is that sometimes there are two rows per transaction and other times it could be 30 rows per transaction. Where I will be lucky is that there are two rows between transactions, and the sum goes in the first empty row.
Basically what I would need it to do, from a macro point of view is to go down column E, and every time it finds the first empty row, insert an auto sum. It would then need to ignore the next row, because it too, is empty.
Just Column E - I need an autosum in the "empty row 1's)
23.00
15.00
6.00
3.00
empty row 1
empty row 2
6.00
3.00
empty row 1
empty row 2
6.00
25.00
3.25
6.32
# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523
Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2).
In other words, if the inputs are the following:
Input Cell 1: Rockfort
Input Cell 2: Pysics
Then, Output Cell should report: 25
I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View Related