I need to do is find a way to automatically find a range and once the range is determined i gotta put on those rows a function [Today()- a date], i know the functions i gotta use but don't know how to set that range automatically and copy or apply the function in those rows in a different column of course.
I am trying to find a way to automatically find and replace 2 letter symbols in a specific column into the words they represent. There are many symbols and rather than do a find and replace for each symbol, I would like to write a macro that would do them all at once.
I would like the XL add-in 'Solver' to automatically find a value 'M' in the equation attached, based on 'R' being 30%.
I also would like to be able to manually enter 'M' based if I would like 'R' to be different from 30%.
How can I program this in VBA, and have the equation automatically done in the first instance simply by clicking on cell 'R'.
I have a formula to add the volume (units) for a customer. The formula is:
=E5+E10+E21+E31+E38+E52+E65+E69
Is there a formula that I can use instead of the one above that will find the customer number and automatically sum the units?
I am looking for a Macro that will allow me to update the range of a Defined name range such as every time I add a name into the list, the only thing I will be doing is passing the client name and the list of client will be automatically updated and my drop down ListBox will show the new client name, which can be selected by the user.
View 14 Replies View RelatedI am trying to find a formula that will automatically fill in text that is entered in Sheet1 if it matches with a name in Sheet 2. I have found a formula that will enter a number but it will not work for text.
=SUMPRODUCT(Sheet 1!$C$3:$C$31,--(Sheet 2!$B$3:$B$31=$A15))
I would like the job on sheet 2 column B to fill in from what is listed next to their name on Sheet 1 column C, if the name of the person is entered on Sheet 2.
Sheet 1
NameJob1MaryFile2JohnLog3SallyIntake4PeterPack
Sheet 2
Staff Name &JobMary0John0Sally0Peter0
I have a Table with MB and GB numbers.
I copy and Paste these into Excel, What I need, is for Excel to Automatically convert the MB into GB by /1024
I tried something like this
=REPLACE(A1,FIND("MB",A1),9,"(But can I enter a Maths here)")
I have 2 columns of data
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc
column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
I am trying to organize it in a way that I can have all my purchases added based on my text criteria of certain purchase... Ill try to be as clear as possible. I have already organized it in a way that when I paste new months statement in my Excel file it sorts it by date, newest on the top, and I made Conditional Formatting by color on column D which states the Description of purchase. Starbucks appears in description cell but it is followed by number and location making each Starbucks cell in column D different in name. So its hard to use Exact phrase formula to combine the amount for that purchase.
My question is: Is there a formula that find a PORTION of text in a D column and automatically adds the price to the right of it together in one cell. There is a formula that looks for the whole text in the cell but that doesn't work when my name has always some extra numbers at the end of the word Starbucks
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI have a workbook, with 2 sheets. first page has graphs, second has data. in my charts I refer to a named range on the second one as follows: Data!Named_Range, where "Data" is the name of the second sheet. However when i save this, it changes the range of the chart to: '101044.xlsm'!Named_Range, where 101044 is the name of the workbook. This is a problem for me as this workbook will often be loaded into a document handling system where the file will change name, throwing out all sorts of errors because the chart path is invalid, and i have to change the range of all the charts manually. why does it have to use the file name when reffering inside the same workbook? and how do i force this to not change?
View 5 Replies View RelatedI want to determine the range in the countif function automatically and relating to a date (i.e. today).
In the attached sheet there are two employees who worked during a certain period, a day worked is 1
Then I would like to count how many days each employee has worked up until today, counting the 1's in the row of that employee until today.
I'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
I want to make a function that gets the range like. "A1:B9" And this function automatically gets the range when given criteria meet.
For example: I have a cell A1 with value 0 and next 0 value in cell A10. I want to put that function in C1. So this function returns me the range like " A1:B9"
I have a table that needs to be subtotaled. The lines for the sub-total already exist and cannot be changed.
How can I insert a subtotal into a cell that will automatically determine the range for the subtotal? Each subtotal will range (single columns only) will be from 1 line to 100 lines. I will work from top to bottom down the page so is there a way to make it work like the Sigma summation sign that is on one of the toolbars?
I have a range of 9 cells located in A2 to A10. The name of this range should be whatever the text in cell A1 is.
The Problem is that the content of cell A1 can change since it is reflecting the content of another cell on a different sheet.
My probelm is that once i define the range to be named according A1 it will keep that name, even if the content of A1 changes.
How can i program in VBA that the name of the cells in range A2 to A10 always is whatever isthe text in A1 is? If Aq changes the name of the cells in range A2 to A10 should change as well; Plus the old name should be deleted.
I think it might work with some event trigger and then a automatic naming of a range. I tried a few things but nothing really worked. (not very exeprianced vit VBA)
I have an Excel file that I believe was a template, maybe from MS. It's a loan calculator. Anyway, whenever you change the interest rate or number of payments it somehow knows to only print those rows - even though there are formulas in many of the rows beneath the print range.
View 4 Replies View RelatedI'd like to set the print range based on the last row with text in specific columns. I found a couple of macros in this forum to adapt, but neither are working. Extra rows, which only contain conditional formatting, and other excluded rows and columns still print.
Private Sub Workbook_BeforePrint(Cancel As Boolean)
Dim MaxRow As Long, i As Integer
MaxRow = 1
For i = 1 To 6
Cells(65536, i).End(xlUp).Select
MaxRow = Application.WorksheetFunction.Max(MaxRow, ActiveCell.Row)
Next i
ActiveSheet.PageSetup.PrintArea = "$A$2:$F$" & MaxRow
End Sub
Private Sub Workbook_BeforePrint(Cancel As Boolean)
Dim LastRow As Long
LastRow = ActiveSheet.Columns("A:F"). Find(What:="*" _
, After:=[A1], SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
ActiveSheet.PageSetup.PrintArea = "$A$2:$F$" & LastRow
End Sub
I have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
I need to summarize some information from a different worksheet. Worksheet A(WS-A) is the summary and worksheet B (WS-B) is the source of information. On WS-B I have a range of values under the title "Materials" which I use to put together an estimate. This range has about 25 rows and not all of them are populated depending on the needs of the particular job.
If it matters, the Materials cells are populated by a drop down "list" from yet another worksheet. On the summary (WS-A) I want to show only the cells from WS-B that have a value in them so that if, within the Materials worksheet, there are only 6 rows that have data in them...only those 6 rows are shown on the summary worksheet.
I have two data tables (Table1 and Table2) on two different sheets (Sheet 1 and Sheet 2). In Col1 of Table2, I have "copied" the values of Col1 in Table1 by using a simple equal (=) formula. Secondly, I have an autofilter on Table2 and a macro that automatically updates the filter when the sheet (Sheet 2) is selected.
My problem is that I would like Table2 to be more dyanmic, i.e. I don't want to change the range of the Table2 each time I add, or subtract, a value from Table1.
Could a OFFSET formula be employed in any way?
I have attached an example file.
The macro is:
[Code] .....
ExpandTableExample.xlsm
i had a problem to fill in weekdays of 2014 excluding friday and saturday as holidays.
View 2 Replies View RelatedI would like to know how to automatically populate a combobox with the data in a certain range. Attached is a simple workbook with the example. I know how to do this with the additem. But I dont know how to create the array or userform initialize to populate the combobox with the range.
View 3 Replies View RelatedIn my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
View 8 Replies View RelatedAny macro or a VB script to fill the numbers in between the "start" and "end" range . The only input that will be provided is the start and end of the range.
For example if the start = 100 000 and end = 100 010.
The output should be
100 000
100 001
100 002
100 003
100 004
100 005
100 006
100 007
100 008
100 009
100 010
Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.
My code so far is as follows:
Code:
If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"
ActiveSheet.Range("K84:T84").ClearContents
The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..
1. I need to define a variable range of all the USED cells in a column (starting at row 2 as the row 1 is the header)
2. I need to do this for columns A through to P inclusively (all using the same lastrow reference as that of column A)
3. I need to call the range name by the contents of the header in that column (Row 1)
4. Some of the data in the header row (row 1) contains spaces - can we change this to an underscore for the range name only?
5. Does a range only work for the active worksheet? Because i will have multiple worksheets, all with the exact same information in row 1, but different numbers of rows (and different data as well), but i will need the range defined on each worksheet......
I've found the following code and thought it was it, but it only defines on 1 worksheet, and for some reason only defines ranges for columns 1 and 2. Also it defines the range as A1:A65535 - not the USED range.....
I found this very nice code on this site that changes the names of my sheets based on the first sheet, works great. What I want though is to have the sheets be unhidden when their name changes from the generic name "sheet1" to whatever else we call it. Can this code be manipulated to do that? I want the sheets whose names do not change to stay hidden, the others to unhide.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lCount As Long
If Target.Cells.Count > 1 Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("A2:A11")) Is Nothing Then
For lCount = 2 To 11
If Sheets(lCount).Name <> Me.Name Then
Sheets(lCount).Name = Me.Cells(lCount, "A")
End If
Next lCount
End If