I have designed a software in excel/vba and when I run that project then startup form appears which has various buttons on it and they perform different functions.
My problem is when I click on button "View MI Report" at first out of various buttons then it works fine and displays me the excel chart sheet. But If click on any other button first and then on view MI report button then startup form disappears and a file is created at the desktop and then after few seconds startup form again appears but it doesn't display the excel chart sheet. I have written the following code on the button
Private Sub CommandButton5_Click()
For Each wssheet In Worksheets
If Not wssheet.Name = "chart1" Then
wssheet.Visible = xlSheetVeryHidden
End If
Next wssheet
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet; *I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells *I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet *I do want that the user can position this comment on his screen where he wants it to be.
I want to make it possible to refresh a particular sheet on clicking a button. i can create the button and even assign the macro. but the code for macro, to refresh i don't know how to generate the code.
I'd like to hide all worksheets and in the excel there is only one visible sheet which is Navigation Page. I want to add several buttons on this sheet and each button will be clicked to call the other sheets.
For example, there is a sheet called Sales_Approval_Form and I'd like to add a button on navigation page called Sales Approval Form and when the user clicks the button the sheet will be open for entering data.
I have one issue with my protected worksheet. Some locked cell contents are linked to cell contents located in another sheet. When I double clicked on these cells, a warning window poped up but also opened the sheet in which the corresponding cell is located. This is quite annoying to have to go back to the former sheet. How can I prevent it ?
I have master data in sheet1 with 4 headings (EmpNo.; Name; Grade; Status) and i put a push button beside it. what i want to happen is that, if i push the button, all data with a value of "Inactive" in sheet1 will be COPIED to sheet2 with the heading but only the EmpNo and Name will be transfered to sheet2.
I have a file having around 57 sheets.But here,I have taken a example.I want a file whose show me only summary sheet.But when,I click the cell no.C7 then the related sheet should be open i.e.FNDADRSCC,and all the sheets should be hide.I have little knowledge of HYPERLINK formula but not to the desired stage.
For more clarification, refer attached file.i.e. BOM Sheets
Desire result file have attached also i.e. Excel_formula
I created with code to copy a template, hide that template, and pop up a box to rename the copy, I noticed she clicked "Cancel" on the InputBox. When she did, she received an error (400). What I would like to do is when the "Cancel" button is clicked, the newly created copy would be deleted. Is this possible?
Here is the code for my full "Create New Project" sheet procedure:
Sub CreateNewProject() 'This code will copy the Project Data sheet, hide it and then 'rename the new copy to the MSA number. Code also prompts user for 'MSA Number and fills that in on the form. Dim RenameSheet As String Dim oSheet As Worksheet With Sheets("Project Data") .Visible = -1 .Copy After:=Sheets("FHWA Quarterly Report") End With...............
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
I know this has been discussed a number of times, but here is my problem I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following: worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
On this chart the X-axis are dates and the y-axis are daily scores. The chart shows each day's data point and computes a trend line. How can I dynamically calculate and display the average score as a single value somewhere on the chart? I could calculate the average in a cell outside the chart object but would like it to be part of the chart. I do not want to show the average as a separate horizontal line within the chart grid.
I have data that shows titles as 2-Feb, 2- Mar; which is really typed in as 2/5/2012 and 3/15/2012. My chart when graphed keeps showing the X-axis as 1-FEB and 1-MAR. How can I get the graph to show the x-axis titleas as 2-Feb and 2-Mar?
Is there anyway for a chart to show only a certain range, ie the past 12 months, without having to update the range every month?
We need to show our scrap rate over the last 3 years. At the end of every month we add a new line. When we enter the number of pieces scrapped for this month I want the chart to drop the number scrapped in January '07
My question is a display/ chart format question. I need to convey what I am showing on this chart in a less "busy" fashion. Is there a way to display the data in an easier to read and see format? In particular, is having both averages on the chart in the same format an issue?
I have a dynamic Named Ranges called ChartData containing 4 values from 4 cells on the row selected. I have a chart using this Named Ranges so that the value displayed are always referring to the current row. This works fine. I created a second Named Ranges ChartAvg which is =AVERAGE(ChartData) that I project to use in the Chart. However, I need to have 4 time the same value (average) if I want to display a line in the chart.
My problem is: I don't want (and can't) enter the Named Ranges ChartAvg in 4 cells to use in the chart. I wish to create a 3rd Named Ranges called ChartAvgData that would be used in the Chart. So now, to my question : How to create a Named Ranges that is a list of (4) values, somethine like: {ChartAvg,ChartAvg,ChartAvg,ChartAvg} This is not working, whereas {1,2,3,4} (for example) works fine.
I'm designing a sheet at work where an individuals performance is monitored then charted. However the supervisor has now decided that he wants to see their performance charted against that of their entire team.
Using Data Validation i have a drop down selecting the user. Then their performance stats are found from various sheets using INDEX and MATCH. I have also done this in another cell to locate their team number ie "Team 1" for example.
Can i use VBA or any other method to generate a chart for when the team is displayed to then generate the entire teams chart? The data to generate this graph is on its own sheet as a team overview?
I have a column of data that I'd like to visualize in a line chart. The cells in the column contain formulas that calculate numbers added to other sheets every month. The adjacent column has the names of each month. New data appears when the data for the month is added.
I'd like to ask the chart to not display the values that are currently zero, because we haven't arrived at that month yet. So, for instance, the cell in the column for November 2011 has a zero, because the range it sums has no data in it yet.
Is there a way to do this without having to go back to each chart every month and change the range to add-in the new data?
I am using a stacked Data chart with Layout #5. See attached. I calculated in a table below the % difference between the 2 months, but is there a way to display this % difference of the 2 months either in the chart or in a table (or both)? Is there a way to modify the table only? Or is there a different type of chart that can display this?
When you hold your mouse over a bubble on a bubble chart, it typically displays the x value, y value and size value. Is there any way to add other captions to display? For example, if my chart is based on sales data and I'm plotting a point based on ease of probability (x axis) and dollar value (y value)....I'd also like to see the initials of the salesperson assigned to that prospect when I hover over the bubble?
I am trying to format my x-axis to list only the labels that have corresponding data points, but at the same time maintain appropriate number spacing. For example, My x-axis range is 0-90; however, I only want tick marks at 0, 5, 13, 40, 85.
I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
I have a spreadsheet where I track income (positive) and expense (negative) items and compare budget to actual amounts. I want to create a simple bar graph comparing budgeted amounts to actual amounts for each item.
However, when I do this, I see all of my income items above the line (pointing up) and all of the expense items below the line (pointing downward).
Is there an option I can select to just use absolute values for the items so they all appear above the line?
I have table with companies across in columns, months down the side in rows, and 6 parts to the data in addition to company and month. I have quotes from 3 different sources, and won deals from those 3 different sources. How do I create a pivot table/chart to analyze the data quickly, or find out Top 10 companies quoting with value and top 10 companies with won deals?
I have attached an example, taking out the company names with A, B, C, and source with A, B, C. The cells do have an array formula which picks data from another spreadsheet. Which, by the way, is really slowing my machine down each time I type something into the spreadsheet.
I am using an area chart to display the price spread between different types of wheat.
Now the problem I am having is that, at the "end" of the chart, ie. the most recent observation date, the line drops to zero while the value is actually well above zero. How can I avoid this ?
I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
I've got 3 problems I've been trying to solve for the last 7 hours, I think they are all relatively simple to those who know what they are doing but I've exhausted my excel for dummies and every formula I have taken from this siteand tried to adapt. Obviously I'll post each problem on a different post, so here's problem one. The sample is attached. It will consist of about 35 sheets, each documenting the hire of a Motability scooter or wheelchair.
On each sheet column P will identify any review dates. What I would like is: On the Master page in Column C next to the relevant sheet name is for it to display any 'Review' that is flagged up, so that the user can have an overview. There will only ever be one 'Review' per sheet, I can only get the master page to show it by referencing it to one cell, I can't work out how to search the whole column.
I want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
