I have a sheet that pulls hundreds of names with a query. These names are ordered by department and each department prints (in gridded table format) on a separate sheet of paper. I would like to set it up to add additional empty rows to the bottom of each table if there is any space available on the page. I'm clueless how to go about it, though...
View 4 Replies
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
So I have exported a canned report showing me payments by day and it is EXACTLY what I need EXCEPT the dates don't repeat (and it has spaces and some headings but those aren't a big issue). Anyway, I need to dynamically fill in these dates for an entire year.
To be clearer, column A starts off with 1/1/2013 and column B has payment amount, column C check number, D invoice number etc.
But the rest of the cells in Column A for 1/1/2013 after the first row are blank until you hit the payments for 1/2/2013. Then 1/2/2013 is listed once and then blank (or junk header data at a page break) until 1/3/2013 and so on. And of course there are different numbers of payments for each day.
I'm looking to dynamically fill in the dates so that I have a real data /flat file that analysis can be run on. I have some ideas ... Could probably incorporate a "do until" statement somehow...
I have blank spaces between data that I wanted to fill up with the same info as a group. the problem is it is not in a fix format.
For example 1
___A_______B________C________D
1_aaaa____data a____data a____data a
2_________data a____data a____data a
3_________data a____data a____Total
4_________data b____data b____data b
5_bbbb____data b____data b____data b
6_________data b____data b____Total
I need to fill A1 & A3 with aaaa and A4 & A6 with bbbb
Is there a way I can do that? the data is seperated only by the "Total"
Got two columns one with group name and other with value. given below is the data which i have
Retail group25635012030Technology group24520520245Wholesale group24334024450
the green cells are blank , i want them to fill up by the group name i.e first four rows belong to retail group, so i want retail group to be filled in the blank cells upto technology group from thereon technology group to be filled in till whole sale group.
I have a sheet that has been created with a pivott table, and as such has a lot of blank cells in the description column, and I want to do a little macro to fill all of these. Basically, what I was thinking, was that the macro finds the last cell with data in it in column A. Then it moves up one cell and checks if its empty. If it is empty, then it copies the information from the cell immediatly below then moves up one and does it all again. If it is not empty then it just moves up one cell and does it all again.
View 3 Replies View RelatedWhat I would like to do is to take the name values in column B and fill that into the region of blank cells below. I know that a special cells function could probably do this paired with a looping structure. I'm new to VBA and am trying to learn it so that I can use it comfortably.
View 8 Replies View RelatedI have 6,000 rows of check detail. The check number is listed in both columns B & C.
If the check paid multiple invoices the check number is not repeated in columns B & C.
I would like to fill the cells in those columns with the appropriate check number. Data looks something like this-
item ck_01 ck_02 vendor ck_date
1 10100 10100 ABC 09-01-09
2 10101 10101 ALLIED 09-01-09
3 ALLIED 09-01-09
4 ALLIED 09-01-09
5 10102 10102 BEACH 09-01-09
6 BEACH 09-01-09
7 10103 10103 CAP 09-01-09
8 10104 10104 DART 09-01-09
How can I fill the balnks with the check number (above)?
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN
EA
Polymer
DE
MA
Polymer
Medium
CN
EA
Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA"
Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro:
i.e
ABCDCN
EA
Polymer
Easy
DE
MA
Polymer
Medium
CN
EA
Polymer
Easy
I was used "if" condition but I can't able to run.
The code below is supposed to find blank cells in column E on sheet3, copy some data from adjacent cells, create a string from that data and paste on sheet4 in Column J. I get duplicate data and or most blank cells? What the heck did I write.
View 4 Replies View RelatedI am working on an inventory sheet. Its probably only complex due to the amount of data. There are several hundred locations we service and these are in a single column, and then there is the equipment we use that is several hundred columns.
Each location uses 3 rows and the 1st needs the formula to equal 2 rows beneath it. i.e. cell E28 has the formula =E30. I basically need to fill down, but only put that formula into every 3rd row, as the two rows beneath this row need to stay blank, or show number i manually put into either.
The second part of this, is there a way once that is done, to just select those cells, and fill to the right all the way? Again, i do not need to fill the two rows under that one.
I have attached part of the sheet .....
The green cells are the ones that need the formula, and those will be copied down, and right. the others need to be left alone. I have been sitting here for an hour manually entering in the =XXX for each cell.
I have a peptide sequence that is 4500 amino acids long. I have the numbers 1 - 4500 in column A and the corresponding letter code for the amino acid in that position in column B. I have done a bunch of other calculations and isolated small series of amino acids within the entire sequence (example: positions 25-42, 153-166, 381-297, etc).
I would like to fill column C with either a blank space or, if it is in one of the selected series, the letter code again. So that the first 24 rows of column C would be blank but rows 25-42 would mirror the letter shown in B. Then blank spaces again until we reach row 153, etc.
I've used a vlookup to paste the letters with the chosen parts of the sequence, but now I want to space them out along the entire 4500 so that I can see if there are overlapping areas between several sets of criteria for choosing series (these would go in columns D, E, etc).
I have inherited a spreadsheet with over 800 rows (and daily expanding) and 14 columns of data. I've attached a sheet that looks similar, with only 200 rows for reference. Here are my questions:
1. How can I delete all rows that contain no values?
2. I want to fill an entire row of data yellow if the values in the final two cells (L&M) in the row are equal, and red if they aren't. How can I do that?
3. Column A contains only dates, from oldest to newest. I'd like an obvious visual clue for when the months change. Currently it's a long, merged, blue-filled cell that says "March 2011", for instance. It can't be color because all cells need to be filled based on certain criteria (see #2), and borders aren't obvious enough.
4. I want to click on the row number on the very right, but have it select only columns A-M, is that possible?
I'm also having trouble with autofill. It seems to only work on parts of the spreadsheet. I don't know what settings may have been changed, but I do have autocomplete turned on, and no clue what to do despite hours of googling.
Test Tracking Sheet.xlsx‎
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have n rows on a tab and I have counted them using Offset and Counta and put that count on B1.
I now need to make a little macro that print from row n to row number in B1. I've seen macros using things like "For i" "Next i", etc... but I do not know how to set the macro to start at a cell with a number n and repeat till the number in B1.
I am trying to create a dashboard of reports. I want to be able to click a button and the user will be taken to the tab with the appropriate report. I am not a programmer so I am trying to use Excel formulas to the fullest.
I am trying to create a 30/60/90 report. I am using a named range for all data. Is there a way to create a dynamic named range and specify for rows where the age column is between 0 and 30, 31 and 90, 90 and 120, and so on?
This is easy enough, but I only want to have items listed if every field on the row is unique which I can do, but is it possible to only display these unique lines and have any lines that contain a duplicate not be shown as a blank or anything else?
View 1 Replies View RelatedIn the column marked SA I have some numbers. These are Sub-Accounts. I am looking to run off a report that prints off all rows with the respective SA number. I have only included a "4" and a "5" in my example but there is going to be more than one row "assigned" to Sub Account 4, Sub Account 5 etc. Ultimately it provides a break down of the accounts.
View 7 Replies View Relatedwriting a VBA to convert a set of data in sheet 1 to one in sheet 2(I am enclosing that as a Excel document"Test -Original").I have described what needs to be done ( step by step ) below.
Develop a macro
1. I have a report from SAP BW, the original format of which is in sheet 1.I need to develop a macro using VBA and need the report with the format in sheet 2.
2. I need a “Results “row after every Bill to Party in column A as below(screen shot 1.doc):
The number of customers is dynamic i.e.it keeps changing every month
4. Nothing needs to be done to column.SAP BW will not overwrite the format and the data in column G.Hence leave it as it is.
5. Calculate the number of Sales document numbers for each customer and put the value of 1 for every value. If it is blank it should not be counted and put the value of 0 for those rows. (Shown below) Display the sum of the number of sales document numbers in the results row for column H
6. In the column I, put the value of 1 if the difference column (column G) is 0 and put the value of 0 if the value in the difference column (column G) is any value apart from 0.now sum the value in the results row for each customer and display the summation value in the results row under column I
7. Compute the percentage which is the values in (column I/Column J)*100 .This should be done only for the results row
So I have a pivot table of about 2000 rows with data on employees.
In the table, there is a field associating each employee with a location (midwest, southeast,where ever) and I have a report filter on it that lets me view only people from a given region.
It was working fine, but I'm doing a lot of VBA macro related to the pivot, and I think I somehow changed a setting somewhere in the process and don't know how to reverse it.
When I apply the filter now, it only shows data for people in the region i choose, except it still shows all the other lines that should be hidden, just with no values. Here is a crude visual
Name region sales
Jim_____MW__10
Henry___MW__34
Jerry____SW__20
Aaron___SW__44
Scot____MW__22
AFTER FILTER for "MW"
Jim_____MW__10
Henry___MW__34
Jerry________0
Aaron_______0
Scot____MW__22
(jerry and aaron should not be visible at all)
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies View RelatedFor example
Name Address Phone # zip
Danielle 4561
Danielle 9852
Danielle 22
Danielle 69
Joe 895
Joe 28
John 9821
John 1114
John 698
Say I did a search for Joe. I want to report back all the addresses in which he resided but there's no way to tell how many rows of data each person has. Joe has 2 rows, Danielle has 4 rows and John has three. How do I report back all the relevant rows?
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
