I have created a worksheet that uses lookup for the numbers that are in sequence but am unsure what formula to use when trying to lookup non sequence numbers as shown below.
Sequence No's
Cell A1:A10 would be 1,2,3,4,5,6,7,8,9,10 (as example)
Non sequence No's
Cell B1:B10 would be 2,5,1,7,3,8,4,10,6,9 (as example)
What do I use to lookup, if cell C1 = 1 and needs to find the No 3 from the Non sequence cells?
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
This is so simple that I cannot even do a search for the answer. My worksheet has a horizontal and vertical cross. After row 16 for example, what is seen on the screen is row 24 for example. I did look at the instructions for "hidden" but I don't think this is a "hidden" issue. I don't want the rows to "jump" numbers, but want them listed sequentially down the page.
View 4 Replies View RelatedYou will probably find this very easy but I am having all sorts of trouble making it work as I want to! Basically I need to do the following procedure...
1) Open an Inputbox to collect an eight digit number
2) Insert a column in A:A
3) In A1, enter a col header (URN)
4) In A2, enter the number that was collected in the inputbox
5) Enter sequential number from A2+1 to the last row
Ideally, this would be randomised, so after stage 2 do RAND(), sort, and clear contents, but if I can get the main part right I'm sure I can work that out!
I have a column that says either TRUE or FALSE this is dependent on what number i input into another cell, so if i input 8, TRUE shows on every 8th row,
I want the cells that say TRUE to also have a sequential number next to it in the column beside it.
Formula i have: =MOD(ROW(S2)-1,nth_No.)=0
So for example, every 3rd row is TRUE, i am wanting a sequential number beside it:
FALSE
FALSE
FALSE
TRUE 1
FALSE
FALSE
FALSE
TRUE 2
FALSE
FALSE
FALSE
TRUE 3
I have a list of numbers in column A- for example
4
3
5
4
3
4
What I want is in column B to give the sequential count that each number is for that number. In other words in row one the number 4 appears for the first time and so the sequence number is 1. It next appears in row 4, so the sequence number there is 2, and for row 6, it is 3.
The completed table will look like this:
A B
4 1
3 1
5 1
4 2
3 2
4 3
Any formula for the cells in column B? My actual list is about 5,000 lines and so I need a formula that is not slow.
I have a column that is listing steps in multiple processes. I have each step 1 marked with a number 1 and would like to have a macro run that will read the column and when it sees a 1 move down to the next row and insert a 2, 3, 4, etc. until it hits the next 1 and then repeat the process. I am unsure how to build this as I am just starting to learn some VERY basic VB scripting.
View 5 Replies View RelatedI have a selected area which I print as labels.
I want to have a number on this label preferably counting back from the quantity of print.
So if I select 300 copies to print, the first label shows somewhere 300, the 2nd label 299, the third 298 and so on.
I use a button and macro for printing selected labels, so perhaps the reverse printing could be added there if only counting up is available.
Also to make it easier, a cell on the sheet can contain the number to count down from (this is preferred on thinking about it) So I could then print 20 labels from 300 to 280 say.
I am trying to print a number of forms with a reference number however when i print i want the number to increase to the next one.
I have used
Sub PrintCopies_ActiveSheet()
Dim CopiesCount As Long
Dim copynumber As Long
CopiesCount = Application.InputBox("How many copies do you want?", Type:=1)
'Now the program wants you to input how many pages you like to print.
[Code] .......
However once i have ran it, save it, and then come back to it later to print again the numbers go back to 1 to 'X',
how do I get it to start from the last number printed?
Is there a formula that will add a number, in sequence, to the end of a text string to avoid duplicates?
I need to generate an ID number for transactions. This ID number is the Account Code-Last Two #s of the Year-Unique 3-Digit Number. So for instance, 5022-14-001 means it is the first transaction from account 5022 in the year 2014.
Column A has the Account Codes. Column B has the date of the transaction in MM/DD/YYYY format. So far the formula I have is:
=CONCATENATE(A1,"-",RIGHT(YEAR(B2),2),"-",TEXT(????,"000"))
With ???? being some function or set of nesting functions I need to create the sequential number. It needs to be able to say "Okay, this is the third instance of there being a 5022-14, so we need to stick -003 at the end of this."
Additionally, this "003" needs to be frozen, so if we change how the sheet is sorted and the line item moves around, it will still always be "003".
I am trying to do some basic VBA in my spreadheet, I just want to create an auto-open statement that inputs then next sequential number in column A1 every time the s/s is opened i.e.1,2,3,4 .....
I am using excel 2007 and my knowledge is very limited. I used a code:
Sub AUTO_OPEN
Range("A1") = Format(Range("A65536"), "YYYYMMDD") & Right(Range("A1"), 3) + 1
End Sub
(the first time you open the file you would need to add the first entry '20021122001)
But this does not work and I get a compile error when run thru debugger.
Windows 7, Excel 2007. a formula to find the next lowest sequential number within a group.
Here's an example data set, which represents transactions by date and category:
Col A is a user entered Date which will not be in chronological order (unfortunately a sort is not an option)Col B is a user entered CategoryCol C is a formula that gives the chronological sort order based on the date.
The formula in C2:C9 is =COUNT($A$2:$A$9)-(RANK(A2,$A$2:$A$9)+COUNTIF($A$2:A2,A2)-1)+1Col D is a formula to determine if the row is the first chronological transaction within the Category
The array formula in D2:D9 is =IF(MIN(IF($B$2:$B$9=B2,$C$2:$C$9))=C2,"Y","")
This might not be a necessary column, but can be used as a helperCol E is where I would like a formula to give the next lowest value in Col C for the Category in Col B (the order number in Col C for the previous transaction within the same category).
I have entered in the values that the formula should return in Col E in the table below
A
B
C
D
E
[Code]...
If the current line is the first transaction of the category, the formula should return the value in Col C for that line (so E2 would equal the value in C2, which is 2).
So the first part of the formula could be straightforward, using the helper column:
=IF(D2="Y",C2,
Here's the tricky part: If it's not the first occurrence of the category, then it should return the value of Col C for previous transaction (or the next lowest number in Col C that is within the same category).
E3 would return 4, since the previous transaction for Category A was line 9
C3 = 6, and of all the values of Col C for Category A (2, 4, 6, 8), 4 is the next lowestE4 would return 6, since the previous transaction for Category A was line 3 C4 = 8, and of all the values of Col C for Category A (2, 4, 6, 8), 6 is the next lowestE5 would return 1, since it is the first transaction in Category BE6 would return 1, since the previous transaction for Category B was line 5 C6 = 5, and of all the values of Col C for Catebory B (1, 5, 7), 1 is the next lowestEtc.
I'm thinking I need an array formula to find the minimum value within the category, where that value is less than the value of Col C in the current line. Just not sure how to write that...
Excel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1
Designated Cell = 7
1 10 .034
15 25 .072
35 45 .089
Output Cell = ???
I am trying to find a formula for the output cell. Suppose the designated cell = 7 due to formulas above it. So that number is always given but can change. I then need a formula for the ouput cell that says if the designated cell is greater than or equal to 1, and less than 10, then the output cell should equal .034. So suppose the designated cell = 18.2. Then I would want the output cell to be .072 since it is greater than or equal to 15, and less than 25. The template I am using has 23 rows of numbers like above. I didn't know how to do it for 23 rows though. If/Then doesn't work because it is 23 statements long (well over the seven limit) and the vlookup only works when the cell is equal to a number and not a range.
VB:
GetData FName(N), "Worksheet1", "H10:H10", destrangeName, False, False
is there a code i can use to choose the 1st worksheet insteading of selecting the worksheet1 in workbook? Because there are different file that got different worksheet name. E.G. worksheet1, worksheet2 or maybe Addidas, Nike.
I have three work sheets.
Worksheet A contains the Names that I want to find in Worksheet B and C. Trouble is, the format of the names are different in each Worksheet.
For example:
Worksheet A, Column 'Name':
Kyle Rowlie
Worksheet B, Column 'Name':
Kyle Rowlie, Head of Excel
Worksheet A, Column 'Name':
Rowlie, Kyle
What I need to do is create two columns in Worksheet A that identifies Kyle Rowlie is duplicated in Worksheet B and C.
I have a number of spreedsheets that may have a 1000 worksheets. Is there a way to find a particular worksheet using a search by the name?
View 9 Replies View RelatedI have my training file that is currently set up and working how I want it to, however I would like to go one step further if it's possible.
on the FIRE EXTINGUISHER TRAINING column there is one person out of date and 14 people that need the training, how can I populate all the name that need this training onto sheet 1 into the box that I have created. I'm wanting this to happen automatically so I don't have to retype the name onto this sheet.
Is there a simple way using VBA to find a date in the format of dd/mm/yyyy? I have a range on every sheet from A1 to IQ1 with dates already entered. I want to add this vba to some other code so the user can go straight to the date entered on the worksheet.
Using the edit find, it can find dates easily. Can this function be replicated through VBA?
I found a topic here that wanted to know how to remove links, I wanted the same thing.
I found an add-in that identified and could remove any links in the workbook depending on the response to the dialog box. So far, so good.
But it found a link that was located on another page, this link was linked to a third workbook. But what the link is doing or what its association is w/ the other workbook is a mystery. How do I see what this link's purpose/function is?
I am trying to find the percentage in a column that is used the most. I know =MAX() finds the maximum number but I need the one that is used the most and if there are 2 that are the same, I need the greater of the two.
View 9 Replies View RelatedI am trying to find the next cell in Column C that contains a value. Please see attachment.
ie.
I need a formula in cell E7 that will find the next number in Column C after the row it is in (ie. the number "2" in cell C9). E7 should then return the row number (ie. 9).
I've defined a string array and would want to use it as a basis for a vlookup. Is it possible to find the elements of the array directly in the worksheet ?So far I've got :
[Code] .....
in finding duplication within different worksheet tables using excel VBA.
Sheet 1 has the following table below:
A
B
C
D
E
F
G
[Code]..
The format of both tables is different within both of the sheets.
The desired output should be shown in sheet 2 table:
A
B
C
D
E
F
G
[Code]..
The above table (sheet 2) shows duplicate rows (bold) from comparing table in sheet 1.
I was using this function below, however this does not give me the desired output i am looking for.
=IF(AND($F2=Sheet1!$F2,$H2=Sheet1!$H2,$E2=Sheet1!$E2,$G2=Sheet1!$G2),Sheet1!I1,"").
It might be a simple question but ive been trying for over a week now and i just cant do it (probably cos my knowledge of VB is useless )
What i need to do is:
I have 2 worksheets: worksheet 1 Articles and worksheet 2 New Prices.
Whats common on both worksheets is Reference Nš (In the case of worksheet 1 its column E and in worksheet 2 its B), what i need to do is replace the price corresponding to reference nš in worksheet 2 (In column E) with the price of the corresponding reference number in worksheet 1 (in column N).
Its a basic find and replace, but its a list of over 17.000 articles so the best way is VB, so i look through your lists and helps, but i just cant do it.
I cannot figure the formula for finding an intersection of two points on a seperate worksheet. I have attached the workbook.
View 6 Replies View RelatedThe formula below works fine except for,E3,F3,G3,H3,I3. They work great if I was on ROW 3 but A2 could take me to ROW6.
=IF(ISERROR(VLOOKUP(A2,Players!B:B,1,FALSE)),"", SUM(IF(Players!E3="y",Players!$T$5,"0")+(IF(Players!F3="y",Players!$U$5,"0"))+(IF(Players!G3="y",Players!$V$5,"0"))+(IF(Players!H3="y",Players!$W$5,"0"))+(IF(Players!I3="y",Players!$X$5,"0"))))
I have a hockey scoring sheet, which has player names, goals and assist with it. What I want to do, is to print in to a different sheet player's name and goal amount, who has scored the most goals.
Example of a scoring sheet:
On Sheet1, I have 6000 rows of Data of which Columns B (ID) and D (Date) are needed to locate the row number on Sheet2.
Sheet2, Column A will correspond to ID and Columns C and D are start/end dates.
I am looking for a calc/function that will locate the row in which the ID matches column A and Date falls on or between the dates in C and D...as I will need the value in Column E of that row.
I'm trying to extract the number portion from the following string. I'm trying to use FIND to find the first digit between 1 and 2 so I used an "or" argument along with the code number, however it's not working here. What I really want to do is find any digit between 1 and 9 in the string, however I started with this formula for now. why this doesn't work and provide a better formula. I want to understand why this didn't work to understand the functions better. Text string is as follows "standard VAT rate: 20% (Jan 1984)". The formula I used in the following =MID(A253,FIND(OR(Char(49),CHAR(50)),A253),2) where A253 contains the string. Is it possible to use a logical argument within a find?
View 7 Replies View Related