Tracker
HOME    TRACKER    Excel

# Formula To Add Column A If Column B = Cell C1?

## a b c d 1 .2 yes yes .3 2 .5 no no .5 3 .1 yes maybe 0 So, as in the above example, I need to put a formula in D1 so that it will take the sum of column a if column b = c1. I hope this makes sense. And keep in mind I will be continually adding rows to this and will need it to cover the entire row, not just part of a row.

Related Forum Messages:
Lookup/Match: Compare A1 For The Values In Column B, Then Return The Corresponding Cell (column C) In Column D
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.

I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.

Formula To Check Column A For Date Range And Count Column B
I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.
Here is what I have but it is counting the dates in col A not the order numbers in B?

Better Method Needed For Column To Column Formula Transfer
On 18 worksheets I intend to use variations of the formula below to read ColsD:G and ColsK:N to ascertain whether the values are less then or equal (

Condition Paste Formula In Column N Based On Column A
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .

I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.

Cell Column Letter In Formula
I want to put the letter A in cell a1(or any cell in column A, SHEET1) of SHEET 1 and get the information from SHEET 2, column A. Put this information in column B sheet 1. I will have about 40 columns in sheet 2. I used a if formula, but only 8 ifs can be used.

Insert Sum Formula Across Last Cell Of Each Column
I am making a deposit sheet schedule, which has 10-15 batches of deposits that are entered one after the other, vertically. Each deposit entry can be allocated to many different expense accounts, so a deposit will be 500 with 400 to rent, 50 utitilies, etc. So I need multiple summation rows

So, I want to add a sum row beneath each set of deposits.

My problem is that each deposit is a different amount of rows long.

I was thinking of doing something like this:

'totalRow() is each row where the summation formulas will go totalRow(0) is not an actual sum row, but tells me where the first row of data lies.

For Each cell In Range("H" & (totalRow(x - 1) + 1) & "", "J" & (totalRow(x - 1) + 1) & ":N" & (totalRow(x - 1) + 1) & "", "P" & (totalRow(x - 1) + 1) & ":AB" & (totalRow(x - 1) + 1) & "")
cell.Formula = "=sum(Range(""A"" & (totalRow(x - 1) + 1) & "":A"" & (totalRow(x) - 1)"

Next

I don't know how to reference the ranges I want to sum, because I don't know how to increment the reference to the column (i.e. changing A to B to F to G, etc.) with the Range().Formula construct.

I was thinking of using R1C1 somehow but I'm not as familiar and I don't think you can use r1c1 & Range() at the same time.

Automatically Add Formula To Next Cell In Column
I have a list of names in column 'A' and a lookup formula in column 'B'. Rather than drag and copy the formula to succeeding rows I would like to have the formula added to column 'B' when a value (name) is entered into column 'A'.

The list in column 'A' is auto sorted by alphabet and the lookup reference in column 'B' need to stay with the value (name) in column 'A'. Mabe some conditional format/formula that says if their is a value in cell A2 to copy the formula in A2 into A3 and so on down the list.

Find Column That Has Value And Put Formula In Cell
I had posted this earlier but it was moved. I think this post will explain it better. I put data into a worksheet called "Budget" each week. When I put the data in I type a date in Cell "BL7". In another sheet called "EV Report" row 8 has week ending dates (i.e. Sunday of each week). I want to run a macro after I change the date ("BL7") and data in the "Budget" sheet that will search row 8 of the "EV Report" sheet to find the date in cell "BL7" of the "Budget" sheet. Once it finds which column that date is in I want it to put a formula in row 13 of the same column (the one found based on the date of BL7) that will add the value in row 12 of the same column with the value in row 13 of the previous column.

I don't want the formula to be there until the macro is run. I'm doing this because I have a graph of the formula and I don't want the graph to show the other cells.

Multiply Every Nth Cell By Another Column Whith Merged Cells, THEN Find Column Total
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".

In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.

If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.

Fill Formula To Last Blank Cell In Column
I have a formula

=LEFT(L2,FIND(".",L2,1)-1)

I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.

Paste Formula Down Column Based On Last Cell In Another
I am trying to get a formula that is sitting in cell A2 to be pasted all the way down column A as far down as B values exist.

Copy Formula Down Based On Last Cell In Another Column
i want to insert value from the name of file from this formula "=MID(CELL(""filename""), FIND(""["",CELL(""filename""))+1,10)" to range b2 until last empty range that i found form this formula =ROW(OFFSET(A1, COUNTA(A:A)-1,0))

Sub lumu()
Dim x As Variant
x = "=ROW(OFFSET(A1,COUNTA(A:A)-1,0))"
Columns("B:B").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B1").Select
ActiveCell.FormulaR1C1 = "kode_wilayah"
Range("B2").Select
ActiveCell.FormulaR1C1 = _
"=MID(CELL(""filename""),FIND(""["",CELL(""filename""))+1,10)"
Range("B2").Select
Selection.AutoFill Destination:=Range("B2", Range("B" & x)), Type:=xlFillDefault 'this an error
Range("B2:B123").Select
On Error Resume Next
ActiveSheet.Name = "t"
End Sub

Conditionally Format Each Group Of Rows And Each Column And Color The Cell In Each Column
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows.

0:001:002:003:004:005:006:007:008:009:000000-296567-6-1-400000286567-300-230000715557-16-11-40-18141755226-348405-362203081417192125-893581061800-2443-11124-289326-81318-1105027854331331211318-10216-161235526785691450451115951-17-1882505656683093102671056-191-33-2710000554740971-61-78-34224107-169-128-17090179-85220-55-63-1-162-140-242-235328266319106113-214-64-148205-4108120-142076-167-60-68-6418081102-800000000000-3099695807185-80356138-123194186210677727125-23233092-2942944748055564476-422051-224-34461486649597117-84209-22-251-94

I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number.
It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.

Macro - If Cell In Column Is Blank Then Input Text Into Same Row In Another Column
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.

A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X

Identify Active Cell And Use The Column To Add Formula To Another Cell
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.

I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.

What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.

In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].

Dynamic Named Range = Last Used Cell In Column; RC In Formula
Can you use Row & Column numbers in a Formula the way you can in VBA?

I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)

Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)

Also I have an existing Named Range HeaderRowNum (it = 16)

Currently I have a LOT of formulas like:
=SUMPRODUCT((\$E17:\$E470)*(--(CO17:CO470>0)))

problem is any new data must be added between Rows 17 & 470

So I would like to create dynamic new forumlas to read like:

Formula To Look In A Sheet For A Cell Then Return That Value From A Different Sheets Column
i am using this formula to look in a sheet for a cell then return that value from a different sheets column

Formula To Return The Value In A Column Based On Cell Entry In Row
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).

I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.

Formula To Go Through Each Row And If The 2nd Column Is Yes Then Return The First Column
I have a collection of data like the following:
Week1 | yes
Week2 | no
Week3 | no
Week4 | yes
Week5 | no
...
Week28 | yes

I need a formula to go through each row and if the 2nd column is yes then return the first column. I could then copy and paste this formula into a the next cell, add an argument saying the returned value cannot be the same as the previous ones, and so on. Essentially this is a series of nested IF statements. However, Excel prevents more than 7 statements from being nested, when I need all 28 to be searched. I cannot think of a way to get VLOOKUP, INDEX & MATCH, or defined names to make this work, because it needs to step through each row.

Formula Or Macro: If Column A = X Then Column Y = Y
I am trying to create a macro that will look for a pattern and if the cell has that pattern, then the cell next to it in the row will have a different pattern.

For instance:

for each row in the spreadsheet:
if column a = "Hello" then column b = "World"
if column a = "AAA" then column b ="BBB"
and so on, for different text values.

Column Name From Column Number For VBA Formula
Say i have a many headings in the first row and one being 'CallStack'. Now i run for loops to find in which column (the NUMBER) is the call stack.

I now pass the number to another function which inserts a formula into the column adjacent to the found column.

So, id need to use the column name (as in \$C) whereas i only know the number (which is 3).

how i can get the column name from the number? Is there an excel vba function for the same?

Every N-th Cell Value From A Column And Create Another Column Consisting Of Every 4th Number
I was wondering, is there a function that would take, lets say, every 4th cell value from a column and create another column consisting of every 4th number ?

Automatically Fill In Column When Certain Cell In Column Changed
I am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction

If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If

Automatically Copy Column To Last Cell In Another Column Upon Open
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.

Private Sub Workbook_Open()

Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show

End Sub

This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.

Countif Formula: Count The Number Of Incidents In Column BB That Are >0 But Only IF The Value In Column E Is "Abbeywood"
I'm trying to count the number of incidents in column BB that are >0 but only IF the value in column E is "Abbeywood". i.e. how many times there's a figure greater than 0 for Abbeywood. I can't seem to get count if to do this!

Fill Down But Have Column Letter In Formula Change And Not Cell Number
i want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.

Paste Formula Across Rows But Change Relative Cell Reference To Column From Row
I'm working on setting up a chart. The formula I'm using for cell B21 is this: =ROUND(F3,0) & " " & IF(E3<F3 ...

If Column A = 0 Then Adjacent Cell In Column B Divide By .3
Im wondering if this can be done in excel..

2 columns

if the value in column O=\$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%

this is the way I was trying to do this...

=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)

I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?

Postcode In A Cell In Column A Appears In Column B
I want to see if a value in column A appears in any of the cells in Column B and to give the answer in column C.

I am trying to match postcodes, so I want to see if a postcode in a cell in column A appears in column B. I am aware the IF function will see if it appears in the cell in the ajoining row but I need to select the whole column dataset.

Find Value In Column & Return Cell On Same Row- Different Column
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()?

Is it as simple as:

Function DocumentType()

If(...........)

End Function

If Column Contains Data Then Insert A Blank Column And Shift Specific Column To The Right
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.

Copy A Column Cell If V Column Cell = YES Then Repeat
Sub Printstuff()
Application.ScreenUpdating = False
For Each cell In Range("V168:V246")
If cell.Value = "YES" Then

'enter the name that is in The A (of the row with Yes) column in A2
'Run Sub Individual
'Print
'Run Sub View All

End If

'Next "Yes"

End Sub

Copy Every 9th Cell Value From A Column Into A New Column
I am really desperate about this. I have a column of which I only want every 9th cell value listed seperately one below the other in a seperate column.

I tried defining the first two cells of the new column (e.g. first cell input is =B1 and second one is =B10, third one would be =B19 and so on...) and using the usual pull down.

In short: I want to copy values from A1,A10,A19,A28...(always +9) into B1 (from A1), B2 (from

PS: I have access to the 2008 Mac OSX version as well as to the 2007 Windows version!!!

Formula To Click Column A To Produce An "X" In Column B
I have been using this formula to click column A to Produce an "X" in column B.

Can this be applied to indidual cells or arrays?

Contains Function: Function That States If A Cell In The Email Column Contains A String Or Value From The Names Column
On sheet 1 I have a list of 1000 firstnames
On sheet 2 I have a list of 1000 emails,

I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.

Find Rows W/same Value In Column A And B And Offset Column C To Next Available Column
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.

0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta

Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.

0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............

Subtracting Column B From A, And Leave Third Column Blank If No Value In Column B?
I have a spreadsheet with three columns (A,B,C). I want the third column C to be column A - B (A minus B) for each row, but only if there is a value in column B.

If there is no value in column B, then I want that row in Column C to just stay blank.

Formula For If Column A = X , Then Column B = Y
im on excel 07 and my columns are pretty simple, like below,

model-------color-------price
a-----------blue--------7
b-----------red---------8
c-----------green-------9

what i nd to know is what is the formula for: if column price = 7, autopopulate model with "a" for that particular row.

also, if column price = 7, autopopulate model with "a" and autopoplulate color with "blue" for that particular row.

Check One Column, Get Value From A Second Column And Display Sum In 3rd Column
I am tying to total all the sales for a given customer. This is what I have at present

Customer Sales
CustA 1000
CustB 500
CustA 1250
CustC 750

Elsewhere in the spreadsheet I have the following

Customer Total Sales
CustA
CustB
CustC

As you can probably see I need to get the sum of each customers sales and display this under Total Sales. I thought about using VBA but am not really sure where to start.

If anyone has any ideas how I could progress this I would be most grateful. I am using excel 2007

Use The Results Of A Formula As Column/row Numbers In Another Formula
I have two cells. The first cell has the formula:

=CONCATENATE("D",TEXT(MATCH(\$B\$6,'Zip Ranges'!\$D\$1:\$D\$157,0)+1,"0"))

which results in a col and row number (such as D65).

The second cell has the following formula:

=INDEX('Zip Ranges'!\$A:\$B,MATCH(\$B\$6,'Zip Ranges'!D1:\$D\$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.

I assume Indirect would work, but I don't know how to code the formula to use it.

Formula To Get Last Value In Column
Is there a formula to get the last value in a column? Column size will vary everyday(dynamic)

If Column A Is Blank Then Column C To G Must Be Blank Even With Formula
I have a value in A1 and I have a constant formula from Column C to G. what I want to do is if column A has no value then Column C to G should not have values. If column A has values then Column C to G should calculate the values. I have a sample excel attached. I can't figure out what to do! I've tried conditional formating but dosn't seem to work

Pull Column Data (Sheet3) From Master.xls And Paste To Column 4, Sheet4 Of WorkingSS.xls
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls

I'm assuming this would be done with VBA or a really exotic macro.

The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.

The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.

next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.

I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.

Merge Two Workbooks. Copy Column Data Based On Numerical ID Match Of Another Column.
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.

I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.

Configuring Dates: Enter A Date In One Column, Another Column Will Automatically Populate With The 1st Of The Next Month
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:

If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008

Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.

Macro Optimization And Moving Text From One Column To Another And Deleting Previous Column
I am running Win XP and Excel 2003.

I have a macro I found here on the boards written by Lenze to delete an entire row based on what is found in column A. I would like to delete any row where Col. B contains 10 or less characters and I have modified it to do so (or at least I think it does). My problem is that it takes about 12 minutes to run the macro (I have about 50k lines to run through). I was wondering if this is the fastest method or if it examines things other than just column B.

Sub Test()
Dim i As Long
LR = Cells(Rows.Count, "B").End(xlUp).Row
For i = LR To 2 Step -1
If Len(Cells(i, "B")) < 11 Then Cells(i, "B").EntireRow.Delete
Next i
End Sub
After this runs, I am left with Columns A to somewhere around AH. The columns are generally in the format of text followed by a numeric column. An individual text column has the same name through all of the rows. The numeric columns have varied values whether negative or positive.
Ideally what I would like: If a given cell (ie. C2) in Row 2 is numeric, then copy the cell to the left (ie. B2) into (ie. C1) and then delete Column B. I need this to work for multiple columns from B to C, skip D and E, and then from F to AG (and maybe beyond).

Sort Column To Match Pair In Other Column, Skip Blank Spaces
Here's what I have.. (on a much smaller scale)

http://www.jmetenterprises.com/produ...pics/excel.jpg

(notice how the lines that match are now even.)

Conditional Formatting (largest Number In Column B The Hotel In Column A Should Be In Bold)
when the largest number in column B the hotel in column A should be in bold.

So in excel language IF(Number in B Is Max display corresponding hotel in column A as BOLD. But I can't figure out how to do this.

You can see here on the image:

Date Column (insert In The First Column Dates Starting From 01/01/2000 All The Way Up To Today)
I'm trying to create an excel worksheet as follows:

Column1 Column2 Column3 Column4 Column5
Date Time In Time Out Hours Worked Pay
01/03/2000
01/04/2000
01/05/2000
.
.
11/11/2008

I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row.
To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.

Range Object/property: Calculates 2nd Column Based On 3rd Column's Number
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.

I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.

Sub SimpleCalc()

Dim SimpleMethodRng, SimpleMethod As String, i As Integer

ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select

SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")

For i = 1 To 8

SimpleMethod = SimpleMethodRng(i, 1).........