I have a few hundred word files that I'm porting tables from. I initially imported every table into excel and figured out which table numbers I needed the data from. I only needed certain rows/columns from certain tables.
The code I have works great....if all the word files were the exact same. However, it appears that when different people edited the word documents, for whatever reason, a handful out of the 300 had their tables switched. So in some cases I'm looking for table 5, other times it could be table 6.
My question: Is there a way to identify the tables by text they contain? for example, the table 5/table 6 comment above, in all cases That table has a header cell called "Equipment". Basically I need something like:
"If CurrentTable contains "Equipment" Then set tableNo = CurrentTable" but I'm not sure how to do that.
In the code below wdDoc is a specific word document. tableNo is the variable set to identify which table to import from. I end up pulling data from three different tables that I would need to search for, each with a specific header.
Code:
With wdDoc
tableNo = wdDoc.tables.Count
tableTot = wdDoc.tables.Count
If tableNo = 0 Then
MsgBox "This document contains no tables", _
vbExclamation, "Import Word Table"
I realise there are a few threads on similar topics but I can't seem to get any of them to work for my scenario. I have two columns with a list of numbers in each. I'm after a function that will scan column A and identify any numbers that also appear in column B. If possible I would like it to then generate a list of these in say, column C.
I have 2 columns I need to compare, in column A a list of ref numbers aprrox 62000 rows, with some duplicates. In column C a list of ref numbers 38000 rows again with some duplicates.
I need to be able to compare Column C to Column A. I need to identify the first instance of a ref number that matches from C to A so that I can delete it. The second instance of this ref number I would like keep. I have tried the following with no luck.
I have unit measures that are converted across four columns (FT, SQFT, SQM and SQY).
THere are three units in rows (BOX, Skid and Roll). I am trying to identify in a column labeled "Duplicate Volume" with a formula stating "YES" if there are duplicate numbers (volumes) in any of the four conversion columns listed above. I tried to attach an excel file here but the system will not accept it. Hopefully the diagram i make below will be enough to understand the concept:
formula to identify consecutive numbers in order, but having trouble figuring out how to identify consecutive numbers in random order.
Cell M1,N1,O1,P1, and Q1 each have a number, 1,4,9,3 and 7.
We have 3 and 4 being consecutive number but they are not in order, would like help in a formula to put a 1 on an empty cell S indicating that there is a consecutive number with a 1 if there are no consecutive numbers then it would give a 0.
The current formula only works if the consecutive numbers are in order, 1-2, 3-4, 5-6, etc...
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
I have a data dump, on this single excel sheet their are a large number of tables, up to 100 in all, and what i need to do is extract key figures to form a summary table which i then produce stats for.
What i need is a macro or code that will automatically scan the tables, retrieve the key figures and return them in my summary table.
Attached is an example, you will see three small tables labelled Servicing query complex, servicing query simple and total.
I need to extract the blue cell, being the name of the table, the purple cell being the last figure in column c in each table (total number or processes) and the green figure being the the average turnaround. The final figure is i think the hardest to get as its the total number of figures in column c that have either a 0 or a 1 in Colum A. Note that their will be table where neither 0 or 1 will appear.
All figures are dummy figures but the table structure is correct.
All the numbers at the end is unique. So what was planning to so is just take the numbers out. As you can see is range from 3 to 5 number. Is there a formula to just pull the numbers out? max
I have a word file that consist of titles followed by hex numbers that I have tried to bring into a excel spreadsheet. Since the Hex numbers have leading zero's I have tried converting spaces to comma's then saving the file to a plain text file then bringing it into excel but have mixed results. The first column is correct but all following colums revert back to general format even though the Text box is checked and the delimiter is the comma. I can upload the actual file which are a number of commands and pronto codes for a Harmony Remote Control device. Logitec has asked me to send these codes to them in excel rather than word. This seems a bit more complex than a normal small file that is illustrated in prior post.
In a word file, I have a list of ID numbers. I want to paste them into a excel file, but the problem is that the last 3 digits of every ID number are converted to "000" no matter what they are. The ID number has 18 digits.
I have a file with a lot of numbers, but one column with single digits. These digits have a cooresponding model name. I want to convert them all to their model name. There are only 4 model names. I tried a nested IF statement, but felt this wasn't working properly or was not the proper formula choice.
A Find/Replace would work, but it picks up the single digits elsewhere in the sheet. I realize i could copy/paste my column to a new sheet and from there convert/paste, but I am trying to get better at Excel.
my new payoff worksheet and then this small bug appears and my excitement like "poof"(gone)!.
with this code --> =if(search("ins",i27,),LOOKUP(99^99,--("0"&MID(I27,MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},I27&"0123456789")),ROW($1:$10000))))+0
i can get the value if the word contains "ins" like this --> "Ins 723.00" return 723.00 which is correct, and then i've encountered a word which is like"723.00 Ins", and martin gave me the code to get from both sides which is this one --> =IF(ISNUMBER(SEARCH("Ins",A1)),LOOKUP(99^99,--("0"&MID(A1,MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},A1&"0123456789")),ROW($1:$10000))))+0,"") . Work perfectly. and my big problem is that the word Ins 723.00 means Insurance and the 723.00 means Inspection, so it means they're different. and it means I cant use martin's code with this.
So is there any way i can get only the value if the word Ins is in the right side of the amount and also the code if the value is in the left side of the amount. I need two formula for this.
I have a very large list of top scorers for a sports team MS Word. The name and number of goals are both on the same line. Is there any possible way I can past them into Excel, so as they are pasted into 2 separate columns?
I have one workbook with 3 Sheets (Table1/Table2/Table3). In Table 3 are the following columns "Table1" and "Table2". I need one script which search in table1 and table2 the words from test1 to test15 and write the assign numbers in table 3 in the right columns / row! If one value is not found, this value should have the number 0 in table 3.
I have the following examples attached, file Mappe1_Test1.xlsx is the before status and Mappe1_Test.xlsx should be the after status.
Right now I and getting an "Type not defined" error and the Dim oData As New DataObject step. Also if delete the code to clear the clipboard, I get an error at the WholeStory step.
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document. For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document 'or Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
I am trying to identify the row(s) where a match occurs when there can be multiple occurrences of the match.
A B C
1 john brown Brown True
2 Cathy Smith
3 Brown excavating company
4 XYZ Corp
5 Brown Advisors Inc.
The first test I ran in cell C1 with the information above was to determine if "Brown" was located in the range of A1:A5 using formula: =IF(ISNUMBER(MATCH("*"&B1&"*",A1:A5,0))=TRUE,"True","False")
In the case of the word "Brown" it occurs in the range of A1:A5 three times, so the result of the above formula would be "True"
Now what I would like to do is return the locations, in this case the row number(s), where the word brown is contained range of A1:A5 because in the case of the word Brown, it occurs three separate times in the range of A1:A5. I would like the resulting value of the formula in this case to be "1, 3, 5" indicating the word Brown occurs in rows 1, 3, and 5. The formula also needs to work in case there is only one match as well.
I tried using the below array formula: ={MATCH(FALSE,ISERROR(SEARCH(B1,'Working List of Vendors'!$A$1:$A$5)),0)} But it would only return the first occurrence of the match which in this case would be row 1, or "1"
I use an excel workbook that contains around 20-30 output tables/ranges and i would to have a macro which will enable me to open a specific word document and paste these tables/ranges from excel into the word document. I am unsure as to how to get excel and word to "talk to each other"???
To make things more difficult i would like to be able to set the paste location in the word document, and ideally i would the copy and paste function to be a normal copy and paste and not a paste special as the tables/rnage in excel have already been formatted correctly and column widths adjusted to fit the margin of the word document.
Currently I select the range in excel, switch to word and paste then continue until all tables/ranges are pasted. Not difficult but as certain calculations change these tables/ranges need to be re-copied and pasted to word which gets frustrating.
I am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.
