I have a button on a cell that is attached to a macro that inserts a row above it. I have to manually select the cell that the button is on, or any cell on that row, first to get this to work. I could use some help in getting the macro to select whatever cell, or row, that the button is on so this will work correctly.
View 9 Repliesi am having a problem with an insert button, with some help i have been able to put down codes so that when i click on button a row get inserted but i am facing following problems
1. row is getting inserted anywhere whereas what i want is below
to have a reference cell say 12 and then when i click the insert button row should get inserted below row 12 only and next click should insert the row below row 13 and so on.
Further i have an if formula in cells below which i want row to be inserted now formula if something like this =if(d2="true", "x","y") now when a new row is inserted d2 becomes whereas i want formulae to have d2 only.
I am trying to show the select file window, choose a pdf, and insert it into a new sheet. i'm using this code:
[Code] .......
I am receiving an error: Run-time error: 1004 Cannot insert object.
I want to insert a command button and assign a macro, I have the developers toolbar available with the controls section and on all other spreadsheets i can then select insert and choose the required button, however on the particular workbook i want to use the insert button is greyed out and not available.
i already use macros in this workbook and they work fine from keyboard shortcuts but i would like to make one of them run from a command button
Is there a simple setting somewhere which i may have turned off inadvertently previously or could the problem have anything to do with the macros themselves?
I Need a button to insert three rows, Let say if I click on A1 and then press the button it will insert 3 rows below A1...
View 1 Replies View RelatedHow do I insert a row using a macro button that insert the row beneath the row that the macro button is touching?
View 9 Replies View RelatedI've got some rows containing formulas under one of several header rows. I'd like to insert a button in column A of the header row which will insert rows below that header. I've got it working using absolute and relative references, but don't know how to determine where the button is located in order to insert below the right header row.
Hopefully that makes sense. If needed I can attach a sample spreadsheet.
Current macro
Sub Test()
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Copy
ActiveCell.Offset(2, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
End Sub
Using excel 2003. Cannot insert command button on a spreadsheet we have. Almost all icons in the control toolbox are unavailable when Im on this specific spreadsheet. Any new documents I open work fine. Is there some kind of protected spreadsheet that wouldnt allow for a button, picture, textbox label to be inserted???
I didnt make the original sheet but am just editing and improving it.
I would really appreciate any advice you could give, I have attempted to attach a jpg showing the greyed out icons in my controltool box
How do I insert list of data from a worksheet into an option button?
View 3 Replies View RelatedI want to use to use Command button for Inserting column or row....
View 1 Replies View RelatedI have the code below. That code call some InputBoxes in sequence, that be filled with correctly information like name, cell phone, date of purchase, etc. (sheet is in Portuguese)
But I want to give a function for 'Cancel' Button, because actually if we click on cancel Button, the macro skip to the next inputbox.
I want to click in Cancel Button, and Exit Sub, I used this Tip for example
[Code] ....
But if we do not fill the Text field, the Macro Exit Sub Too
Some fields are optional, so for this i search for a solution
Click in Cancel Button and Exit Sub
[Code] ....
I have a button (group containing and add and delete button).
I want to identify the row (position of shape/button calling the macro) to enable inserting a new row (1 row down from current row).
Then do the same to delete a row (position of shape/button calling the macro) to enable deletion of selected row.
This will allow me to add/insert rows by the button located at that row
The problem i have is getting the row property (row position of the button eg. TopLeftCell.Row) of the add button. The add button (RowBtnAdd) is a shape within a group (BtnGrp)
I also note that when a group is copied, it has the same shape name as that copied.
I want to keep the add and delete shape within the group (BtnGrp).
I do not want to select a cell or row or enter a row number to delete etc.
refer to sample workbook attached. Currently only has one record row.
I was wondering if i could get a hand with inserting a file. Is there a way to insert the file and have it placed a relative distance from the insert button without using cell references?
View 2 Replies View RelatedWhat I am trying to accomplish is the ability to insert a value into a cell if an option button is selected. If the option button is not selected I want there to be a different value in the cell. This is what I have so far:
Sub OptionButton2_Click() Range("F8").Value = "$299" End Sub
What I am having issues with is the "else" clause. I want the value to show $0 if the option button is not selected. I attached a screen shot for reference.
I insert a button in spreadsheet, when I click this button a userform appears with place to input value. I would like to check the entire column (maybe < 100 rows), if there is number exceed the input, then disply that ROW in another sheet.
View 1 Replies View RelatedI have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
I'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies View RelatedI am trying to do the following
Unit Percentage Score Unit 1 Percent ScoreJohny SmithBetty Donovan
Unit 1 Operations & Algebraic Thinking2100.00%50.00%
Unit 1 Measurement & Data3100.00%66.67%
Unit 1 Geometry0#DIV/0!#DIV/0!
Unit 1 Number & Operations Base Ten16100.00%93.75%
1-I would like to create a type of link or button that would exist in the cell "Johny Smith" so that when a teacher clicks on that name excel would generate a graph or pie chart for the specific data associated with Johny and when a teacher clicks on Betty a different graph would pop up. I know teachers can just highlight the data and insert charts, but many of them don't know how to do that. I have been asked to make the process a one click function.
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies View RelatedI am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
Can anyone tell me what the macro code is to do this (at whatever box I have selected at the time)
say my box is selected at E3, then when I click the button, it creates a new row E
likewise for F7, AA1, etc...
I have a togglebutton for an excel sheet in use for scoring psychological tests. When pressed, the button higlights the cells where a raw score is inserted.
What I need is a code to higlight the togglebutton when pressed, eg. green (colorindex 4). The button is white. How to do this?
Below is the code, It has more lines than needed, but it works.
Private Sub ToggleButton1_Click()
'FKV TOGGLE'
ActiveSheet.Unprotect "manisk"
If ToggleButton1 Then
[Code] ........
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedContext: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit