Hi, I am using this formula - SUMIF(X!$A$1:$A$107,"*"&A3&"*",X!$B$1:$B$107) in Excel to match cells on the source tab to a range of cells on the target tab X. Both ranges of cells contain place names so for example the cell A3 above on the source tab references a number of cells on the target tab X containing "Glasgow" but I need the formula to exclude any cells that contain "Glasgow Mobile" as at the moment it is adding them together. This needs to be draggable so that it will pick all place names but none containing the word "Mobile"
I have extracted data from multiple sheets and now want to mark this data as "Paid" and for the macro to go back and change the value in the original sheet on a row in column "AR" to "PAID. All the columns have the same data type in.
The extracted data contains the original sheet name and each row has a unique ID No to it.
I know I probably need to use INDEX and MATCH and then Offset to post value.
I am trying to monitor the status of a cell on another sheet and autopopulate a cell depending on that information. The formula works well until I give the spreadsheet to a 3rd party and the formula ranges change after they paste new data to the source sheet. I have tried locking and password the formula cells but they change range regardless!
Here is the formula from the first cell.
[Code] ......
It scans for a number in an adjacent cell. If the number is present on the sheet 'Test', it autopopulates the cell with a string from the source sheet. The cell remains blank until there is data present.
If I cut data from row 6 and paste it to row 17, the formula cahnges itself to:
[Code] ........
How I can lock down this formula so that the ranges remain the same i.e. $AT$6:$AT$26, despite changes on the source sheet? I have tried F4 to toggle relative and absolute references and this has made no difference.
I am making a spreadsheet for use by my customers. Is there a way to leave cells that have formulas' in blank until the cells that make up the formula have entries in?
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
when you choose Data Validation for a specific cell, you can choose list. Once you have chosen list for "Allow", you can select the source cells for what will be in the drop-down menu. I want to be able to use VBA (or just use Excel) to modify those source cells.
For example:
There will be 3 lists with drop-down menus using Data Validation.
List 1: Choose first option in list -> List 2 uses source A Choose second option in list -> List 2 uses Source B etc...
List 2: Choose first option in list -> List 3 uses source C Choose second option in list -> List 3 uses source D
I am looking to have the Cells that I have applied a Dropdown List to update with the changes that I make to the list itself.
Example:
If I were to validate a list with a range of a1:a3 using "Bob" "Sarah" "Bill" and then apply that list to B:B and randomly select from the three names running the length of B:B, I would want that when I go back to A2 and change "Sarah" to "Linda" that every "Sarah" that I have selected using the drop down will update to say "Linda"
I hope that I am explaining myself clearly and in a simple context.
I'm finding my way in pivottables (which is a new function to me).
I can now create one to count the item I wish (see attached).
I'm trying to get the table to display, but not use for counting, the rest of the row calls associated with the counted data.
For example, looking at attached, the source data is so: ComponentPart NumberValuePackageType C1C0805COG1NFJ50V 1nF0805 COG 5% 50V C2C0805COG1NFJ50V 1nF0805 COG 5% 50V
I'm counting how many instances there are of the part numbers and displaying in the pivottable as so: ...
I've used vlookup before but his #REF problem has me stumped.
I want to concat two cells in the Source worksheet and vlookup into the Defs sheet, but I keep getting #REF(G4:G6) when I want to return the 2nd column in the Defs sheet. What's curious is when I modify the vlookup to return the 1st column I correctly get the lookup cells(G6:G9).
What's wrong with the formula in G4.
My requirement is I can't change the format of the Source worksheet because it contains macros that work with ERwin. And it is MUCH bigger than the attached sample so I will copy/paste the formula down 6000+ cells.
I have a formula in cell A1 that I need to drag downwards so that it fills cells A2 to A10. That formula is picking up the figures located in another sheet but the figures on that sheet are arranged horizontally (A1 to J1). Is there a formula to perform this action? I've tried playing around with the $ sign in my formulas but it does not work.
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13 Tue/03/09/13 Wed/04/09/13 Thu/05/09/13 Fri/06/09/13 Weekly Total
I want to try and create a macro that will start with the value in the first cell of one column and find it another column and highlight both itself and the other value and then move onto the next value in the cell below and repeat the same process until it reaches the end of the column. This would result in leaving unhighlighted cells as new items as it were that did not exist before.
I have four columns of data that I'd like to compare. If none of the cells match, then I'd like to add all the cells together. If all the cells are different, then I'd like the number to match the others. Here's the problem: if two or three cells match, but the others are different, I'd like to take one of the matching cells and add it with the cell(s) that does not match.
I have a list of account numbers is row A. If the numbers match I want to go to column D and sum the total. I have searched the forum and can't find anything formulas specific to add a column when the criteria change (in column A). Is this possible in VB.
I am trying to find a way to match formulas from two cells (not the value but the formula). I am creating a smaller excel test where they can enter a formula (C3) and directly see if it matches the correct answer (F3) All I have found is formulas containing value comparison.
I have 2 sheets of data one for data the second for input and calculations.
SHEET 1 (Data) HEADINGS - FROM / NUMBER A / 81 C / 99 E / 01
SHEET 2 (Input & Calculations)HEADINGS - FROM / TO / FROM val / TO val
I want to be able to stick "A" in Col1 (FROM) and the number 81 to automatically appear in Col3 (FROM Val). I am unabel to use LOOKUP as my Pocket PC doesen't recognise it.. VLOOKUP and HLOOKUP are ok though, I just can't seem to get them to work for me.
In this workbook Test1.xlsm my active cell (in this case) is "E2" and i am trying to insert the word "INVOICE" in cell "E2" using a macro. Now, the adjacent cell to the left is "D2", i would like that for every cell in column "D" that matches cell "D2" to also have the word "INVOICE" inserted in its adjacent cell under column "E".
i currently have a spreadsheet that uses vlookup and match to identify data that matches 2 criteria.
so there is a table with names on the left and dates on the top, and the dates change over time. this reference another table with the data for the names at all dates. therefore, the formula does is a vlookup with a match inside it.
this works well.
so say today is Jan 1. Columns 1, 2 and 3 are Jan 1, Feb 1, March 1 On Feb 1, columns 1, 2, and 3 are Feb 1, March 1, April 1
in column 4, i want it to equal the sum of the data for all dates beyond the date in column 3.
does this make sense?
i attached a small sheet i was working on to play around with these functions. in the sheet i just used numbers (1,2,3) instead of the dates for simplicity
I'm trying find a way when running a report that continues to grow weekly - to either run with a script or a specific formula. There's certain cells that I'm trying to capture but the main thing is it's very time consuming and is tracked onto a separate workbook. Here's what I'm looking for a hand on:
Weekly list of 20,000+ rows - includes customer information - names, addresses, phone, account #, order #, etc I sort my list by address and then look and manually count the duplicates. Once duplicates are located I enter on a separate workbook along with the most recent order number. There has to be a faster way.
So Column A has First name, Column B has Surname Column C is empty Column D has list of firstnames, Column E has list of Surnames, Column F has User ID
I want to Look at the Surname in Cell B2 see if I can find a match down Column E, if I do I want to look at the First name next to it in Column D see if that matches Cell A2 and if both match put the User Id in Column F into cell C2