I have a spread sheet of information exported from an inhouse software package saved to my computer; this info is a few months old so i want to compare it against newly exported data to check for new companys on the system and changes of address for old companies etc.
Typical fields are as follows:
Setting name; street address; post code; etc...
I've got a sheet here with a master list of document numbers in Column A and a smaller subset in column C. I need to do is for Excel to scan column A for cell C1 and when it finds it in column A i need it to return the corresponding value in B column into cell D1. I need to do this for all column C.
View 2 Replies View Related3 matches and sum up. what I am trying to do is match week no in Col A , with AJ1 Onwards, match Cell name from B1,F1,J1 etc with col AH, match C2 INT or E2 EXT etc, whatever the col match IE: Speed (cell) C2 (INT) A3 Wk no (25) sum up all Speed matches in Col AH with the relevant Col Ak in this example , and the same for each other cell and INT & EXT. Row 2 with RECI & RECE are to be ignored
this Formula works on some but it isnt summing properly =SUM(INDEX($AJ:$CM,MATCH(B$1,$AH:$AH,0),MATCH($A3,$AJ$1:$CM$1,0)+($C$2="INT")):INDEX($AJ:$CM,MATCH(B$1,$AH:$AH,0)+COUNTIF($AH:$AH,$B$1)-1,MATCH($A3,$AJ$1:$CM$1,0)+($C$2="INT")))
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWith the vlookup function below, is there any way of naming the col_index-num instead of a number. Because i have many columns and i want to identify it distinctively. It is too dificult to look into column and count it until i got what kind of value i am "vlookingup" in a particular column...example the column index num value is 58, instead of 58 i want to name it as "Bonus" for example...
VLOOKUP(lookup_value,table_array,col_index_num,[range_lookup])
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
I have a problem with the VLOOKUP function and i can't work out what is going on. I've attatched file. On the members sheet in cell F9, the result should equal 13.2, but the formula throws out 13.0. The final VLOOKUP seems to be the problem. The lookup value is F8(which is 13.4), the table array is named 'calc'(on the tables sheet), and column index number works out to be 3. The figure in column 3 is 13.2, yet it throws out 13.0!
View 4 Replies View RelatedI have attached a sample workbook, (Pricing Sheet - Major) within this work book there is a worksheet entitled Price Book which has commonly-used materials, unit prices and labour rates. What he wishes to do is use the contents of the Price Book worksheet within a worksheet called Pricing Sheet to enable him to prepare quotations.
I had the idea to first sort the items in the Price Book worksheet and then produce a dropdown list of these items for use within the Pricing Sheet worksheet and used the VLOOKUP function to obtain the values for unit prices and labour within the Price Book and use them in the Pricing Sheet worksheet.
I have designed a spreadsheet and i want a seperate worksheet (sheet3 for arguments sake) to retrieve customer data from worksheet 2 - The data I required is the customer data currently contained on columns A - H and there are around 50 rows. (A2 - I51). I want the seperate sheet to identify entries that have today's date in column I and then list them in Worksheet 3.
Im having difficulties with the syntax for retrieving the data from a seperate worksheet. There may be several entries for the same date and I want to the seperate sheet to report all customer data in worksheet 3? Also, if the date falls on a weekend I would like to retrieve any data for the weekend on the Monday so all cases can be reviewed.
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I have some code that goes through some data that is imported from a database via a query.
This has been working for a few years without a problem.
I lookup and employee number on my sheet to the employee number in the database table.
this is my code that checks the employee number.
Set rs = Worksheets("Employee")
If rs. Cells(r, 2) = cells(1,1) Then 'if employee number matches
......
The problem is that now the database application has adapted an alpha option (it used to be numeric only). In order for my code to work I have to change the employee number on my sheet by putting a ' in front of it.
Example if the number was 127 I need to enter '127 in the cells.
I have a few thousand in my data.
Can I add some code to my macro so I can still enter just the number in the cells?
I am either trying to do 2 vlookups or 1 match and a vlookup, but I am not sure. I have two workbooks. The first workbook I need to populate the 'Actual Taken' column from my second workbook. Below is the first workbook:
******** ******************** ************************************************************************>Microsoft Excel - FY07Q3_LMS_Payroll_.xls___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutD9=
ABCD1*Training*HoursStore*Manager*2Pay*Per*Hour*$28.37Actual*Taken3LMS*Courses4Baseball*/*Softball*Basics***5Baseball*/*Softball*Equipment***6Bike*Basics***7Bike*Fitting*and*Essential*Items***8Callaway*Golf***9Columbia*Footwear*Technologies*2006/2007***RCoursebyPosition_MGR*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The second workbook contains all of the data. Please see below:
******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCD462Softlines*MgrTeam*Sports*-*Hockey**Count3*463Softlines*MgrTeam*Sports*-*Lacrosse*Count2*464Softlines*MgrTeam*Sports*-*Soccer**Count4*465Softlines*MgrTennis*Audio*CD*Test*Count4*466Softlines*MgrTennis*Basics**Count7*467Softlines*MgrTennis*Equipment*and*Technologies**Count7*468Softlines*MgrUnder*
What I would like to do, is first have the formula locate the Store Manager from the First workbook and find it in the Second Workbook, then once it finds Store Manager, look at the Course Name from the Frist Workbook and find it in the second workbook, finally populate column C from Workbook 2 to the Actual Taken in Workbook 1.
I have an account issue. In the attached file sheet Balance, there is a trial balance sheet with account ID, Name, Credit and Debt which I download from system every month. In sheet Check, I have some related account IDs. If the ID is found from Balance sheet and is Credit, the amount in Check sheet will be positive. Otherwise it will be negative.I have ever tried to use Match, Vlookup function to do it but did not get it.
View 3 Replies View RelatedWhy I am getting N/A errors in sheet 1 of workbook?
For example, in sheet1, Cell B2 should equal 3. And it should stretch across the entire data range, so even something like B14 should return 3.
In Column A I have vessel departure dates
In Column B I have Final Destinations
In Column D I have vessel arrival dates
I am trying to get the result of column D based on matching A & B information. My dilemma is that if I have vessels with the same departure dates going to different destinations how can I retrieve the arrival date? I've been trying "vlookup" and "index/match" to no avail.
I have a worksheet that has numerical data in A1:A22. In E1:E61 I have set values in numerical order and in F1:F61 I have a letter or letters that correspond to E1:61.
I am trying to write a formula in B1 that will look at the value in A1 and then match it up in E1:E61 and then return the corresponding letter in F1:F61.
e.g: in A1 i have an INDEX and MATCH formula
In cells A1:A10 I have the following list;
FLOUR
DOUGH
CHICKEN
BEEF
PEPPERS
TOMATOES
CHEESE
ONIONS
POTATOES
SALAMI
I want to be able to get a partial match that will allow for spelling mistakes by the user. The wild card (*) seems to only look at the left-most text and return #N/A if the text isn't matched sequencially.
For example ....
i have a customer work book for outstanding orders of which there are hunderds of rows with there name order number and the items that are outstanding
when i have progressed all my purchased orders i take all the items and run it throught my work book using vlookup to return who wanted what items if any
but what if there are more then one customer wanting the same item how can i get vlookup to know that and return the next match
i'm still very new at excel so can someone please help me
attached is a small test of my work book
if you see item 3182Y/1.0/BLK
you can see it is wanted by both a.f switchgear and amg
but it will only return a.f switchgear
I have two columns with names on it. and Column A has about 600 names and column B has about 447 names. I want to match these two columns and get the names which do not match on Column C.
View 11 Replies View Relatedi currently have a spreadsheet that uses vlookup and match to identify data that matches 2 criteria.
so there is a table with names on the left and dates on the top, and the dates change over time. this reference another table with the data for the names at all dates. therefore, the formula does is a vlookup with a match inside it.
this works well.
so say today is Jan 1.
Columns 1, 2 and 3 are Jan 1, Feb 1, March 1
On Feb 1, columns 1, 2, and 3 are Feb 1, March 1, April 1
in column 4, i want it to equal the sum of the data for all dates beyond the date in column 3.
does this make sense?
i attached a small sheet i was working on to play around with these functions. in the sheet i just used numbers (1,2,3) instead of the dates for simplicity
I have a spreadsheet that looks like this:
ABCD E F
1Scenario A Scenario BScenario C
2Studio1520
31Bed1520
42Bed150
5
6
7Scenario A Scenario B Scenario C
8Studio5% 10% 15%
91Bed10% 15% 20%
102Bed15% 20% 25%
RIght now my formula For Cell D2 is
=IF(C2=0,(B2*-$D$8),0)
I need the formula to Match what is in Column A and Also what is in Row 1 to what is in the table (C7:F10)
I am able to to use the Vlookup to look up for value in the "Sheet sept". All value can be updated expect the item called "mug" as it is not listed in the "Sheet all". How do I highlight the missing item in the "Sheet all"? Attached herewith a file for better understanding.
View 11 Replies View RelatedHow do you do a vlookup with a partial match?
View 5 Replies View RelatedI am having 2 workbook. I want to vlokkup / extract the relevant column values if Lookup_value DOES NOT MATCH.
Ex:
Workbook1
A1=PPP-00099
Workbook2
C1=PPP-00088 E1=786
In F1 (of Workbook2), answer would be 786 since C1 DOES NOT MATCH with A1.
If matched, answer required="" (null).
I am using Vlookup to search for a text string in column A and storing the value of column B for more than 40 variables.
I do NOT want a macro error on Vlookup each time it can not find a match. I want to store an "error message" in that variable and move on.
countif and a rountine handler sounds like a lot of coding for each variable; can I use ISNA?
SAMPLE
Sheets("CPARS download").Select 'CPARS DOWNLOAD
RFQnum = Strings.Mid(WorksheetFunction.VLookup("RFQ Number", _
Range("CPARSdata"), 2, 0), 1, 13) 'RFQ# should be same for each supplier
' RFQnum = Mid(RFQnum, 1, 13) 'truncate the supplier code at the end
BidDue = WorksheetFunction.VLookup("Bid Due Date", Range("CPARSdata"), 2, 0)...........
Here's a sample data set. How can i perform a vlookup to populate my forecast columns and have it match BOTH the customer column and the SPFKey columns?
******** ******************** ************************************************************************>Microsoft Excel - Receiving Qtr1 2007.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutL20=
ABCDEFGHIJKL1Business*UnitCustomerSPF_KeyFORECASTACTUALS*2"NBPRO"Sold-to*PartySPF_KeyJanFebMarTtlJanFebMarTtlVariance3NBPROAAR*CORP.883***01*1224NBPROAAR*CORP.933***020**20205NBPROAAR*CORP.934***09**996NBPROAAR*CORP.999***02*1337NBPROAEROTHRUST*CORPORATION6600***01**118NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD918***0*11229NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD919***0*112210NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD933***042422210610611NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD934***042424112512512NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1742***0*1*1113NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1793***0*0*0014NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1795***01**1115NBPROAIR*INDIA933***036408215815816NBPROAIR*INDIA934***046176512812817NBPROAIR*INDIA1742***0**00018NBPROAIR*INDIA6601***0*1*1119NBPROAIR*INDIA6602***0*1*1120NBPROAIR*INDIA6603***0*0*00Sheet2*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have two worksheets that I am hoping to use to generate one report in excel. Sheet1 contains the following information for my entire work center:
Benefitor Account Dollar Value Document #
Sheet2 contains a list of Benefitors that are relevant to only me.
I want to pull the information from Sheet1 where the benefitors on Sheet1 match the benefitors listed on Sheet2 into Sheet3.
I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.
I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.
Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?
I have some intersting issue. Actually there are lot of functions in excel but my purpose is somewhat is solved by VLOOKUP , MATCH, OFFSET, INDEX functions.
Prob: Here i have a database contains as below
A1 B1 C1 D1
111 123 i/p o/p
222 301
111 321
333 456
If i keep 222 / 333 in C1 i will get output at D1 as 301 / 456 respectively. But if i keep 111 , i want a desired result to be most lastly updated value in the array that is 321 but it is printing 123.
let say if have
A1 B1 C1 D1
111 123 i/p o/p
222 301
111 321
333 456
111 500
then if i enter 111 in C1 then i want to get 500 but still am getting 123 only. tht is the first hit.
i want to return a value which has lastly updated.
So if i use any fuctions from above i may getting correct results for 222,333 but i want result for 111.
Thoughts and rules:
1.The new entry will added at the end of the array.
2. A1/B1 are only numbers.
3. free to use any functions
U can have flexibility to create one more array or even update the column B1 if any i/p matches in column A1. So there will always a single output for each unique input.
Imean to say u can have a array with
A1 B1 C1 D1
111 321 (replace 123 with 321) i/p o/p
222 301
(remove this entry)
333 456
