I have a dataset in one column. Here 4 cells should be turned into 1 in a new column using a middelvalue.
How do i get excel to do this, so it uses 4 new cells from the first row to every new cell in the new column?
I have an excel work sheet with 2 columns and hundreds of rows. The first column is time in minutes over a number a years and the second is a list of corresponding data readings (numbers). I want to only select on the hour data from the list however I cannot seem to do it. The times vary in the sense that they are not all just 1 minute apart, some are every minute, then there might be a 10 minute gap in data, a few more minutes, then another gap etc.. All I want to be able to do is to select all the on the hour data from the list and its corresponding data value.
View 6 Replies View RelatedI have a list of days and hours, and data for whether a type of event either did or did not occur for each sampled hour. I need to return a new value, some sort of "Event Day" value, which will essentially tell me if an event occurred at least once for each day.
Attached is a sheet with 4 days' worth of data. Jan 1st and 3rd 2006 are my two "Event Days".
To complicate things, I can't be sure I have 24 hour readings for each day, so I can't assume each day is a data range (e.g. A1:A24). Hours might be missing. (As such, I am trying to organise along the lines of IF the preceding cell is the same date...)
I also have lots of data stored as months, so would love a formula I could just autofill down. All it needs to do is effectively flag up for me when a day has experienced one event.
I have a problem converting hourly data into daily data for electricity import capacity. My file has the following form:
| Connection | Date | Period | Available (capacity) | Where 'Connection' identifies the physical location of the capacity (4 possibilities, Germany -> Netherlands; Norway -> Nehterlands; Belgium -> NL; UK -> NL), 'Date' refers to the date, Period refers to hour of the day (e.g. 18:00-19:00) and 'Available' refers to the import capacity of electricity on that conncetion during that hour. I need daily aggregates and tried several things such as DSUM but I cannot manage I've shortened the attached file quite a bit because of the upload size restriction. I am using Excel 2010. I've tried some suggestions in similar topics but none worked for me.
I have a large sheet with the values of power from a counter in a 15 minute base.
A B
01.01.09 00:15 0,25
01.01.09 00:30 1,15
01.01.09 00:45 0,75
01.01.09 01:00 2,01
and son on until the end of the month
What I am trying to do is to create a macro which calculates the average per hour and put in another columns like this:
01.01.09 01:00 average from 00:15 until 01:00
01.01.09 02:00 average from 01:15 until 02:00
and so on until the end of the month.
I have a string of data containing hourly timestamps with a value attached to each timestamp.
I need the timestamps to be every 15th minutes instead of hourly. So basically, I need the hourly value to be continued four times for each timestamp.
See the attachecd workbook. It should be quite simple, but for some reason I just cant figure it out!? A bit embarressed In the woorkbook, I need VGTs and VPTs to be in a 15 minutes granularity.
ERROR: Cannot upload workbook - uploader not showing so here are shot of the raw data:
VGTs
VPTs
01/02/2013 00:00
[Code].....
I have large data sets with half hour values that I need to average into hourly values. Here is an example of the data:
28.12.2012
01:30:00
0,1
2,4
2,5
127,6
28.12.2012
02:00:00
0
0,9
0,9
118,5
[code]....
I have a worksheet containing one timestamp column and a single column of data, the interval being one minute. How can I aggregate it to get half-hourly totals?
View 4 Replies View RelatedI have got a lot of data to put in a chart that updates every 5 minutes with new data - i have a chart that Line chart that shows this.
It shows the cost of something every 5 minutes.
I have put this in a chart using offset but obviously i want to show the cost over the course of the day - because this updates every 5 minutes, the axis at the bottom (which has the time of the data) is massive and doesn't look good.
Is there a way to show the axis at an hourly interval but keep all the data in the chart?
I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
I have been using the attached formula to calculate total volume (customers seen) by hour (between 1 and 2, 2 and 3 and so on...). But how can I change this formula to take a census at a certain period of time (let's do it on the hour to be easy) instead of double-counting those who were there, but left in the same hour and those who just entered in the same hour. I hope this makes sense...a true census really should not count two people twice though which I think is happening here...
I hate to create a sense of urgency, but would love to begin working on this later tonight. Please let me know if you need more detail.
I am trying to create a conditional formula. I have multiple workers that work for different $$ per hour. I am keeping the hourly rates on one page for security purposes (the person that is going to be updating the hours worked is not very computer savy and they less they have to type the better) and the hours on another... I want copy a formula down the page that will calculate the hours to the hourly rate. The issue is that i want the formula to look at all of the hourly rates (assume they get raises) for Joe and multiply the most recent hourly rate times the hours... in addition I don't want the formula to re-calculate when a new hourly rate is put into the hours sheet.
Example
Jan. 1 joe works 8hours at $10 per hour formula in A1 (or wherever) calculates $80
Jan. 2 joe gets $1 raise
Jan. 2 Joe works 8 hours at $11 per hour formual in A2 calculates $88 but formula in A1 maintains the $80 and does not calculate the $1 raise.
I am trying to build a costings sheet for shift work. The first problem I am experiencing is getting excel to split up a shift into the different bands.
For example the shift needs to be calculated on different rate bands, from 00:00 to 08:00, 08:00 to 19:00 and then 19:00 to 00:00. There is a different hourly rate for each band. Therefore if I enter a start time and end time, I need excel to calculate the total charge over the different rate bands.
For example a shift 07:00 - 21:00 would have:
1 hour 07:00 - 08:00 at Night rate
11 hours 08:00 to 19:00 at Day Rate
2 hours 19:00 to 21:00 at Night Rate
Once I have this worked out I have the added complication of different rates on Friday evening,s, Saturdays and Sundays etc. But at the moment one problem at a time !
I have a list of values at 'x' min intervals (the intervals sometime changes). I want to sum each hour's values eg. between 0:0:0 hour and 0:59:59, I want to add values 1040+800+860+870. Then I want to proceed and add all values for the next hour i.e. between 1:0:0 and 1:59:59, and so on. I have about 65000 of these calculations to do, so the need for some vba programming.
Hour value
0:14:531040
0:29:53800
0:44:53860
0:59:53870
1:14:53850
1:29:53860
1:44:53710
1:59:53670
2:14:53610............
i have a s/sheet with thousands of times in a column (eg col1 below in 24 hour format) and would like these in an adjacent column in hourly intervals (eg in Col2 below
e.g.
Col1 ColB
00:23 0 - 1
02:54 2 - 3
09:07 9 - 10
15:24 15 - 16
Is there a formula I can run to enable?
1/1/20080:221/2/200814:051/1/20082:451/3/200819:301/1/20089:001/1/200819:33
In time Out time
I 've used the site many times in the past, but this is my first post.
Above is a small example of the data Im working with. I'm not wanting to plot all of this out by hand, so hopefully someone can help (there are around 30,000 samples). I'm looking to track by hour when a customer is actual here. The first row is one customer in @ 00:22 and out the next day at 14:05.
I would like to have dates of the year down column A and hours 0 through 23 across row 1. Then a number of customer here on 1/1/2008 by every hour of the day on to 1/2/2008 so on and so.
I have a macro that I want to run on an hourly basis, say at 9am, 10am, etc whenever the workbook is open. This needs to be definable as I have several users that will be conducting the same activity throughout the day. In other words I want the macro to run on the hour for user 1, quarter past the hour for user 2, half past for user 3 and quarter to for user 4. Each user does have their own unique macro to run so it should (hopefully) just mean introducing a line of code to each, defining the time to run.
View 4 Replies View RelatedHow can I get the median of a column that contains both hourly and annual rates? I would like to either multiply the hourly rate * 2080 or divide the annual rate by 2080 then get the median.
View 6 Replies View RelatedI am trying to calculate earnings based upon hours worked based on 24 hours format (time out - time in = time worked) multiplied by hourly rate. I cannot get the proper calculation. How can I attach a copy of the Excel worksheet?
View 9 Replies View RelatedI'm having trouble with conditionals based on a primarily a 4 hour minimum. I am trying to set it up so that anything under 4 is shown as the minimum 4 hours + Travel Time - Lunch Time or if it is greater than 4, shown as Regular Hours + Travel Time (since travel cannot be overtime) - Lunch Time & Overtime (anything over 8 hours). Additionally, I was wondering if it would be possible to incorporate an additional IF formula based on the date. If the entered date is on a weekend, then all hours worked will need to be overtime rather than regular.
View 1 Replies View RelatedI am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
2WayLookup_Macro.xlsm
For a landscaping company, who is looking to service gardens more effectively/efficiently, they are mirroring the below variables to the amount the client is willing to pay per hour. I also have a sample file.
I have, on Sheet1, 8 columns I'm working with:
R3:R132 is the currently hourly rate
L3:L132, M3:M132, N3:N132 are current units, volume, and labor hours respectively by location.
AD3:AD132, AE3:AE132, AF3:AF132 are new units, volume, and labor hours respectively by location.
AI3:AI132 is the suggested hourly rate by location. Note this is already calculated and filled in. I need to calculate new units, volume, and labor hours based on the suggested hourly rate.
On Sheet2, I have 4 columns I'm working with:
A2:A161, B2:B161, C2:C161, B2:B161 are hourly rates, units, volume, and labor hours respectively.
They are laid out in combination with one another to show possible combinations of these variables that make sense for the landscaping company.
My goal is to figure out what combination the company wants to go with for a given hourly rate on Sheet1 given the following logic to follow:
1) Attempt to reduce labor hours to get to suggested hourly rate - This is to calculate new labor hours on Sheet1 in cells AF3:AF132.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J
Email in Column L
Memo in Column N
Balance in Column T
Due Date in Column P
Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L
Subject: "Company Payment Remittance Payment Date *Date from Column P*"
Body: Hello *Name from Column J*,
For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
Example Workbook for Email Macro.xlsx
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.