I am after a code that will sort out the below printing problem
I want excel to hide ALL OF column E from the printer, i want to see the information myself but when i press print, column E will not show on my printed page
i have found this
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.Name = "Sheet1" Then
Cancel = True
Application.EnableEvents = False
Application.ScreenUpdating = False
With ActiveSheet
.Range("e1").EntireColumn.Hidden = True
.PrintOut
.Range("e1").EntireColumn.Hidden = False
End With
Application.EnableEvents = True
Application.ScreenUpdating = True
End If
End Sub
but am not sure how to enter it, also if the code is correct. I have entered it using the alt+f11 then clicked on this sheet, and put it in there but it still dont work
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank Pic2
How i want it to look like upon printing Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
I have to print this Excel in the following manner.
I have a table which is similar to one given below. All I need is to print these information in each sheet. For Example Coat sold by CA separately, Coat sold by FD separately, and so on (like the lines I have entered).
Is there any way I can create a Macro for this....
I'd like to set the print range based on the last row with text in specific columns. I found a couple of macros in this forum to adapt, but neither are working. Extra rows, which only contain conditional formatting, and other excluded rows and columns still print.
Private Sub Workbook_BeforePrint(Cancel As Boolean) Dim MaxRow As Long, i As Integer MaxRow = 1 For i = 1 To 6 Cells(65536, i).End(xlUp).Select MaxRow = Application.WorksheetFunction.Max(MaxRow, ActiveCell.Row) Next i ActiveSheet.PageSetup.PrintArea = "$A$2:$F$" & MaxRow End Sub
Private Sub Workbook_BeforePrint(Cancel As Boolean) Dim LastRow As Long LastRow = ActiveSheet.Columns("A:F"). Find(What:="*" _ , After:=[A1], SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row ActiveSheet.PageSetup.PrintArea = "$A$2:$F$" & LastRow End Sub
In a previous, expired thread, the following code was suggested as a way to capture the page-setup zoom value after setting PagesTall and PagesWide. It works fine when single-stepping in the VB Editor and when run directly by the user, via a button click or Tools=>Macros...=>Run, but fails when run under a Worksheet_Activate() event call.
Does anyone understand why that is and/or have a fix or workaround?
Sub X() ' Application.ExecuteExcel4Macro "PAGE.SETUP(,,,,,,,,,,,,{1,#N/A})" Application.ExecuteExcel4Macro "PAGE.SETUP(,,,,,,,,,,,,{#N/A,#N/A})" MsgBox "Zoom factor is " & ActiveSheet.PageSetup.Zoom
I have created a sheet to calculate a resturant bill that need to be printed for each customer. I am trying to creat a command that will print the sheet up to the last item in the bill "sheet2". So I need the printin area to change according to the number of itmes.
I am trying to write VBA code that will print a print range that is presented in cell F3 on a "Reports" worksheet. The content of F3 will change depending on how many reports the user selects to print. For example, he could select one, two, three reports etc - up to twelve. The cell ranges of each report are named (e.g. Report1, Report2 etc) so that if the user selects to print Reports 1 and 2, the contents of cell F3 are "Report1,Report2". If I replace WhatToPrint with "Report1,Report2" the print macro works.
Sub Macro2() Dim WhatToPrint As String WhatToPrint = Sheets("Reports").Cells(3, 6).Value 'sets the variable to equal the contents of cell D3 which contains the formula 'summarising the print ranges I want to print Sheets("Reports").Cells(3, 6).Select ActiveCell.FormulaR1C1 = WhatToPrint ' pastes the variable in cell F3 - just to check that it looks like I want it to Sheets("Reports").PageSetup.PrintArea = WhatToPrint 'uses the variable to set print area - this is where it fails! 'if you replace the variable with the contents of cell F3 the macro will work ActiveWindow.SelectedSheets.PrintPreview End Sub
For I = 6 To 18 Sheets(I).Visible = xlSheetVisible PrintSubs Sheets(I) Sheets(I).Visible = xlSheetVeryHidden Next End Sub
When it starts printing it starts off with my "JOBCOM" sheet which is sheet20. why it would start printing with that one. That sheet shouldn't even print at all. It's only supposed to print sheets6 to sheet18.
We have a program that sorts Characters into separate racks. I need to print a label for each rack. I can set the print area to cover the whole rack area but what I do not want to do is print blank labels. As you can see I have blank labels at the end of the row, and occasionally there will be one in the middle of the row as well. I have attached a screen shot of the list that I need to print. Is there any way that I can set the printer to only print the label that does have information on it? or am i going to have to print the blank labels in the middle as well?
I've seen code to set the print area for a dynamic range. However, how can the print area be defined by these parameters:
A1 to one extra blank row below the last cell of data in column A (height), and last column with data in row 12 (width).
Here is what I'm starting with...
Private Sub Workbook_BeforePrint(Cancel As Boolean) ActiveSheet. Names.Add Name:="Print_Area", _ RefersTo:=Range(Range("A1"), _ Range("A1:IV65536"). Find(what:="*", searchorder:=xlByRows, searchdirection:=xlPrevious, after:=Range("A1"))) End Sub
I have copied formulas in other columns down beyond what the last row of col. A will be. Also, this will need to be applied to about 7 sheets in one book.
I want to have code that will print everything down the sheet until it sees a blank in column A. I have included the code i am trying but it keeps giving me errors.
I have been trying to see if I can set up a single (A1) print button to create a selection box to select a name range and than print that range, but have been unable to figure out how to accomplish it. I have 26 name ranges called PP01 thru PP26 and I want to be able to select the range before printing.
She has a spreadsheet created in Excel 2003 (she is still using 2003) which contains an image with a textbox in the top left corner then all other cells contain data.
When user prints this spreadsheet all that prints is the image and the textbox.
I have cleared the print area reset the print area removed the picture (prints only the text box)
and none of these changes have changed what prints.
I have checked all printer setting and these appear normal.
previously user could print this spreadsheet fine and all other worksheets in the workbook print fine as well.
other users are still able to print to the same printer correctly from this spreadsheet.
Can a single(or multiple) column be shown on sheet but not printed? I have a list with a bunch of vlookups in column C-H, a numbered column in A, the code used for the vlookup in B. I do not want to print the code(column B) but do want to print A,C-H. I do need to see the column B in sheet. How do I do this?
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
I have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
This is the scene. Imagine 2 lists of data, each list 2 columns wide (like 2 lists of names and phone numbers). List 1 covers column A and B, List 2 covers column D and E. I want it so that on the push of a button, columns A-E are automatically resized to be just big enough for their longest content, and column C resizes so that column D is on the next page.
The general idea is that you can print the sheet, and put together the pages relating to the seperate lists.
In the column marked SA I have some numbers. These are Sub-Accounts. I am looking to run off a report that prints off all rows with the respective SA number. I have only included a "4" and a "5" in my example but there is going to be more than one row "assigned" to Sub Account 4, Sub Account 5 etc. Ultimately it provides a break down of the accounts.
i need a macro that will set print from A1 to H (last data row) if age entries in col h is >=5, i dont want to print data below this age criteria
Over2day CDEFGH6Value DateEntry DateTypeAmountCCYAge71-Oct-075-Dec-08LDR2,203.67USD729819-Nov-075-Dec-08LCR200.00USD680924-Jun-0817-Dec-08SCR2,001.38USD462 Excel tables to the web >> Excel Jeanie HTML 4
I created a lab result page for long term patients. thus, they may have 1 to 1000 lab results. so i need to create an infinite print range, but just printing the filled ones.
Right after column J, print 2nd page if filled, if not, dont. And printing A1:J6 to every page is a good solution to not to lose data in long term.
I have cells in one worksheet that contain references to other cells in another sheet. I was wanting to print the contents of the first column of the row referred to. So if one sheet is called 'data' and a second sheet is called 'word finder' and 'word finder' has cells that contain references to cells within 'data' how would I then dump the contents of the cell within the first column of 'data' corresponding to the row of the cell referred to in 'word finder'?
I need to get a button to print specified columns of data. There are columns in between the data that I don't need. So what I need is something that will allow me to print everything in column D starting at row 4 down to the last cell with data in it as well as G and H starting at row 4 down to the last cell with data in it. I have somewhat figured it out but the data ends up being put on different pages when printing. If possible I need it to print side by side on the same page.
I need to use macro to find the last column index number within the print area. My cell sizes change depending on the data entered so the last column in the print area changes. The code I want to implement involves putting a title at the top of the page and creating a border that spans the width of the page. This is what I have so far:
LastColumn = Cells.SpecialCells(xlLastCell).Column ' replace this with last column in print area
Rows("2:2").Select Selection.Insert Shift:=xlDown Range(Cells(1, 1), Cells(2, LastColumn)).Select With Selection .MergeCells = True .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With
With Selection.Borders(xlEdgeLeft) .LineStyle = xlContinuous .Weight = xlMedium .ColorIndex = xlAutomatic End With