I'm after a formula or some formatting trick to split up the address in the attached sheet. As you can see, the addresses have come through from a database in one cell, instead of a separate cells for the street line and the suburb line, making it difficult to merge for mailing.
eg. the address are coming through to the merge like this;
I'm trying to split the address stored in column A into two columns (i.e. columns B & C). I got more than 30,000 addresses stored in column A and got the following excel function to do the job. However, it seems not to exactly solve my problem.
in column B : =LEFT(A1,FIND(" ",A1,20)-1) in column C : =right(A1,len(A1)-FIND(" ",A1,21))
First, using the above functions, I got to manually drag the formula to the end of column containing 30,000 records! I tried to use vba to perform the job the script failed to do so. I know there has been something I missed in my vba script but do not know how to correct it.
for k = 1 to 30,000 Range("b" & k).value = LEFT(range("A" & k),FIND(" ",range("A" & k,20)-1)) Range("c" & k).value = RIGHT(range("A" & k),len(range("A" & k)-FIND(" ",range("A" & k,21)) next
What I really want to do is split the addresses in columns B & C with the first text ended with "Street" or "Road" stored in Column A and the other text after "Street" or "Road" in column C.
column A : 128 Johnway Road, 12/F, Flat C, Kowloon, Hong Kong column B : 128 Johnway Road Column C : 12/F, Flat C, Kowloon, Hong Kong
to automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
I believe many people face is to automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
I have cells of block addresses that are delimited (tab I believe - there's a small square that appears).
I need to split the addresses out into separate columns for each line of address. I tried using the Text to Columns wizard as suggested by Excel Help, but ended up with only the first line of address being posted in the cell to the right (the rest of the address was nowhere to be seen).
I'm sure I've done this before but can't for the life of me remember how I did it.
I have a spreadsheet with a few thousand rows, yeah i know..lol Each one of the rows has contact details for individuals. I have the address for each person in one field with up to four different sections, seperated by tabs. How do I go about seperating each part of the address so it is in a different column? I have tried text to columns, and it only seperates the first portion of the address, seperated by the delimiter 'tab'.
I have a 2000 row sheet with an address field that contains the apartment number and the address. The text is displayed as unit number, then hyphen and the building/street number for example '101-1234 15th Street'. I'm looking to cut the building number from the cell and paste it into a seperate column. Ideally removing the hyphen completely, so that I have two columns 'unit number' and 'building/street address'.
How to modify the below vba code? It sends an email with an attachment right away after pressing the macro button. I would like the user to see the email in outlook before it gets send... and then press 'send' in Outlook .....
Sub Mail_ActiveSheet() 'Working in Excel 2000-2013 'For Tips see: http://www.rondebruin.nl/win/winmail/Outlook/tips.htm Dim FileExtStr As String Dim FileFormatNum As Long
count if fuction on positive and negative number in the attached excel sheet. I would like to count how many numbers are positive and negative in the A column of the attached excel sheet.
I'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
I have a huge data which needs to be divided and distributed to team members. What i want to achieve is to split, thru macro/VB, the entries in my main file into several files, say by 50s. I attached files for reference. Whereas, the Dummy.xls is the main file and Book1 & Book2 are the desired output.
For the past 4 months I have been desperate to find a way to split my sheet so that I can determine the column widths above and below that point independently.
For example:
small width from a1-b1 but really large width from a2-b2
If coded correctly, there are various Excel functions & tricks for creating a formula to send someone on a wild goose chase through many worksheets and cells before finding the final cell that contains the final value. I was able to use =Cell("address",...) function to cut through the many paths and retrieve the address of the final cell. Is there a VBA trick for doing this to the active cell? I would like to be able to run a small VBA routine that would trace back the fomula of the active cell and return the final cell's worksheet and cell address.
I am trying to take an address book on the internet and copy/paste it into excel- not hard right? Ok, so that is done. The problem I have is that there are over 2000 addresses- and they all copy straight down into one column. I know how to transpose the information- but come on- there are over 2000. that seems like a LOT of work. So my first question would be is there a way to do this all at once? For each company/name/address/phone I need one row per company.
If I have 12 sheets in a workbook (Jan, Feb,etc..) can I have those names in specific cells (A1,B1,etc..) and call them out in a formula as the cell name as opposed to the actual name?
I have one worksheet in my job named "Tudo" and there I have about 100 rules and the name of employees that need to follow these rules. What I need is the worksheet named "Nomes com Regras" show me in each name which rules is for each person.
What I am trying to do is, check if the value of c2 in update is the different to the value of c2 in original then run a code (for the moment just says msgbox so I know it works).
I'd like to split up the rows in a worksheet based on the values in one of the columns. Also, I'd like the sheets to be named after the values in the column. I have attached example excel sheets to explain this better. I think the vlookup and Sheets.Add and ActiveSheet.Name formulas can be used but I'm not quite sure how to put them together. The actual data has about 20 columns and about 500 rows.
I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.
Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.
The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.
The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.
What I have tried already:
1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model
EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid 2) declaring a range as set r = activecell.address
EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)
A solution to add to the existing "on change" event macro that identifies the last edited cell
I have a master sheet named "Summary" and a number of following identically formatted sheets with lots of different names. I intend to pick out information from cell F7 of each of the following sheets and make the information show on the summary page. On the summary sheet in column A is the name of all the following sheets (spelt correctly), and in columns B, C and D are the spaces for the information I need on the summary sheet.
I need to set up a formula across columns B, C and D that I can copy down, which picks out the name of the sheet from column A and the cell reference within that sheet. So far I have experimented with formulae similar to the below which all keep returning with #REF! I hasten to add that all the Sheets are named and spelt correctly: =INDIRECT("'"&$A1"'!",$F$7)
The F7 would be changed for other cells in columns C and D, and so when I copied this down through all the following sheets on the summary page it should give me hte right results...
I have a variable list. Each column will be 250 digits and numbers of rows will be variable. I want a macro to import a text file from a specific folder into a sheet without split it to columns. So we will work only in column A
Then macro will find B1002 wording in A1. if it is exist, it will copy the next 36 digits after B1002 wording if not then it will search A2 row. The next step will be to search and find another wording "B1001" if it finds it will replace copied 36 digits text. If it can not find B1001 wording it will go to upper row and search B1001 wording here and paste the text. This will go on till row shows #END. This means it reached the end of the list. And then macro will save this file as text file to another folder.
So macro will go to beginning to open other file in the folder and this will go on till last file in the folder.
This is the logic of the macro. Here is the sample of what I want.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1: ######################################### Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe". #########################################
Part 2: #################################################### Column C contains addresses in the format: "#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210". ####################################################
