I have a look up table on sheet 1, that looks like this table to the right. On sheet 2, I need it to find the table contents in the column CC, then look at a column AA and find all that match it and move all that match this cell in column AA and copy the row it to sheet 3.
Need the formula that I will need in my macro to move to the next column (up one letter) for the next time I run the macro witout me having to manually change column the letter?
How to do what I am about to ask takes time and time causing brain overloading. I have made screenshots but I can't upload them. I get red exclamation point with images sizing ~55KB
I am a buyer of hundreds of different types of items. I get thousands of different price quotes each day for hundreds of different items, 3 of which are balls, gloves and bats. I don't have the time to go line by line through thousands of quotes for hundreds of items each day to find the best deals. I want Excel to point the best deals out to me automatically, perhaps by making a cell.
Basically I need excel to sort my data by item type.
Then, calculate the average price for each item.
Then, point out any price quotes that are 10% below the average price, perhaps by making that quote in a red box. Attached is a spreadsheet with an example.
I have sheet 2 with a table with data in A2 thru X500, A1 thru X1 are my headers, A1 data is either Forecast or Sold, B1 data is Month, C1 is Value. I first need to Filter the data by Forecast, then by a specific month then by the value in decending order (keeping in line the data thru x which are headers I don't need to sort by). Next I need to take the 1st 10 lines by a specific month; A thru X and copy it onto a defined section on Sheet 1.
I then need to do this for the 2 more times for the 2 proceeding months. So If we start with Jan, I need the macro to do Feb and march as well.
The end result is that I have Sheet 1 with 3 sections on it each section is 10 lines and the resulting data is my top 10 forecasted deals for Jan, Feb, March. The macro must be able to do this for each month, so if June is chosen the 3 months are june, july and Aug.
I have a simple projectlist on sheet1 formatted like this: Column A=Projectname, B=Description, C=Owner, D=Deadline and E=Status. On sheet2 I have the same columnheaders.
What I would like to do, is that if Status changes to "Done", * the entire row should be copied to a free row on sheet2, or just inserted on sheet2.row2 without overwriting anything * the now empty row on sheet1 should be deleted (so there're no empty rows) * the data on sheet2, should be sorted with D as first key and C as second.
Then, if Status on sheet2 changes to "Reopened", the same procedure should happen but from sheet2 to sheet1.
My first choice was to create a checkbox on each row in the Status column,but I noticed it didn't seem to follow with cut/paste even though I changed the property Locked to false. Anyone knows if it's possible to change this behaviour?
I only know small bits of VBA but my idea is this: ...
I have been using Excel to create equipment lists for my work. The forum has helped me by creating a visual basic macro to create a 'final list' sheet compiled from the other source worksheets.
On my 'final list' sheet I need the first 10 rows to be left out of the macros so that I can add header information like job reference etc. I have tried altering the visual basic code by adjusting the row numbers in it so that it starts at row 10 but this keep's on producing error codes. This is due to my limited knowledege of what each line does.
I also wish to be able to paste new equipment into the final list sheet. When I do this at the moment the code does not recognise it is there and does not carry the information accross back into the source sheet. It is the same when I block select an area and delete the code does not recognise I have done this which is fustrating.
Column A | Column B | Column C Los Angeles | Fire Dept | 3 Los Angeles | Health Services | 12 New York | Fire Dept | 8 New York | Health Services | 22 New York | Internal Services | 100 New York | Public Works | 7 Chicago | Health Services | 15 Chicago | Public Works | 56 Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept Health Services Internal Services Public Works Social Services
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA() Do While ActiveCell <> "" Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0) ActiveCell.Offset(0, 1).Select Loop End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P) phone (Q) primary phone (R) col S col T col U
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
I have attached a sample spreadsheet what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as B03 ,B41 etc so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a B41 and then it should do the same until it comes across a B42 or a blank cell again. This needs to continue till the end of the report.
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
I believe that the best way to evaluate this request is to look at the example. I have 2 buttons to demonstrate what I need, along with written instructions.
i want to sort column D acsending, then column C descending. i want to do this using VBA because i cant just format the sheet because another vba macro paste the sheet thier which would rid the formatting. (i would do it myself everytime but it is for someone to make it easier for them and not make mistakes..i searched, just found a sum formula post)
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15") .Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate End With
I have been given an Excel file. Upon opening it, I see that the top four rows do not move even if I scroll down. What I'd prefer is that only the first row (for column titles) not move. If I can learn the name of this feature, I'm sure I can figure out how to change the file.
I need a macro that I can assign to a button so that it will jump the screen to a particular cell. I want it to select the cell in a chosen column in the same row as the cursor already was. So, if I'm in M10 and I hit the AK button, it'll jump to AK10. If I'm in F54 and I hit the AK button it'll jump to AK54.
