For example I have a data set that will grow over time say 13 rows, I want to write a formula that will only use the last 3 rows with data entered and get the Median of those rows. I know that the Median Formula for the entire 13 rows would be =MEDIAN(A3:A16). Anyone know a way to make a Median formula only look at the last 3 in any given time without manually updating the formula's range?
View 3 Repliestable1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I have a list of part numbers in a column and a list of suppliers in another column. Parts may have anywhere from 1 to 15 suppliers.
Is there an easy way to show each part number once down one column, with the suppliers going across the one row for each part number?
Example:
PN#Supplier
123ABC
123DEF
123GHI
123JKL
123MNO
123PQR
456ABC
456DEF
456GHI
456JKL
456MNO
456PQR
456STU
Desired Output:
PN#Sup1Sup2Sup3Sup4Sup5Sup6Sup7
123ABCDEFGHIJKLMNOPQR
456ABCDEFGHIJKLMNOPQRSTU
I tried a pivot table,
Here is my problem. I have a a workbook with 2 sheets.
Sheet 1= Data sheet; Sheet 2 = Table
On sheet 2 I want to copy down an entire row (A8:AH8) but the problem is that the number of copied rows depends on the number of rows contained in sheet 1 column A (-1 row)
So if i have 101 records (100 +label) in column A sheet 1, in my sheet 2, it must copy down the formulas from (A8:AH8) until (A107:AH107)
The following table/ code is something which I've been trying to tailor from a previous post so I'm not taking the credit for what I think is some very good code. Unfortunately I can't find the link to it - sorry!
Right, I have a number of columns containing a various amount of data entries in each with the first row being the header. I would like to generate all possible combinations of this data in one column, the entries separated by commas, that will eventually be exported as a csv file.
The number of columns and number of rows in each column will be changed regularly ...
I am having to copy and paste rows of data into a new worksheet where the rows sizes change and I am wanting to add a new row at the end of the pasted rows but with the sumation formula to add the relevant column
e.g copy range B14:AA17 with in this case columns E to AA holding the numerical values. Therefore I wish in cell E18 to sum the value of E14:E17 and so on ending with cell AA18 holding the sum of AA14:AA17
As these vary I have all relevant variables, Range to add sumation values to eg E18:AA18
Start Cell E14 and so on.
I tried adding "=SUM(x:d)" where x and d are vars relating the the column cell required eg x = E14 and d = E17
I want to create a custom updating formula that finds the last data element on a different sheet and then updates it's own formula. I have to do this because I want to find all of the blank cells and count them up (for missing data purposes). How can I go about putting the last row number in the formula?
This below is the best I can get but it 1004 errors out, I'm assuming because of my "Row" variable. Should I try a concatenate and custom build the formula each time within the macro?
Sub MacroToRun()
Sheets("CleanData").Select
Range("A65536").End(xlUp).Select
Row = Selection.Row
Sheets(" Chart Data").Select
Range("B2").FormulaR1C1 = "=COUNTIF(CleanData!R[-1]C[17]:R[row]C[17],"""")"
End Sub
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I have a list of two columns. Here’s an example. The left most column provides the row number.
_ A B
1 1 0
2 2 1
3 2 1
4 3 2
5 4 2.5
6 5 4
7 1 0
8 1 0
9 2 2
Whenever there are two repeating numbers in column one, I want to reduce certain numbers in column 2 by a certain amount. The amount is determined by half the difference between the number in column B corresponding to the second repeated number and the number in column B corresponding to the row after the second repeating number. The range of numbers that are to be reduced begins with the row after the second repeating number and ends with the last row before number one appears in column A. The values in column A are integers, always starting with one. For example, 1, 2, 3, 4, 1, 2, 3, 1, 2, 3, 4, 5.
For the above example, after finding the repeating number two’s at A2 and A3, it would reduce B4 through B6 by half the difference between B3 and B4 (1/2). The values for B4 through B6 would be updated in column B. The same for the next repeated numbers, which is one at A7 and A8. Half the difference between B8 and B9 is 1.
Here’s what the updated list would look like:
1 1 0
2 2 1
3 2 1
4 3 1.5
5 4 2
6 5 3.5
7 1 0
8 1 0
9 2 1
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedFormula(s) to do as explained in the attached example.
Example_formula.xlsx
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
see the attached spreadsheet including the data. In Column AA I have created a formula that looks at Column B, and pulls each unique value from that column. add to this formula, or propose a new one, that pulls unique values into column AA if at least one of the rows has an "Actual Finalization Date" in column D that is in 2014?
View 1 Replies View RelatedI need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I'm currently using this formula to calculate the average values in column B where the value in column A ='s E1 eg:
=AVERAGEIF($A$2:$A$21,E1,B2:B21)
Instead of doing this however, I need the formula to calulate the average from column B where the "Date" in column A ='s the year and month I specify in other cells.
Year value specified in: F1
Month value specified in: G1
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
I have some values in the column and i want those values to be displayed in rows now. Example:
In the Excel sheet the data is in the form,
Column1 Column2 Column 3
TASK_TYPE NE_TYPE ADC_PARAM_ORL
I want in the format,
Column1
TASK_TYPE
NE_TYPE
ADC_PARAM_ORL
putting rows between different values in first column. The following puts 3 row inbetween each value in column "A".
View 2 Replies View RelatedI've tried (and failed miserably!) to copy and then paste values from a COLUMN to a ROW using all sorts of code I'd picked up in the forum but all the code only works when copying and pasting values from ROWS to ROWS.
I have data in cell A1, A3, A5 to A13 on Sheet1 (notice blank cells inbetween) that I'd like to copy to to Cells A2 to M2 (A1 to M1 have headings) on Sheet2, then A3-M3 etc.
The cells on Sheet1 will always be the same, BUT each time I click the "Transfer Data" button, those values must be transferred to Sheet2 IN THE NEXT EMPTY ROW, please.
It is not necessary to skip the blank cells in the COLUMN Sheet1 - simply copy / paste them as empty on Sheet 2 and I'll hide the empty columns, i.e. B, D, etc. If it is easy to code this "skipping of blank cells" (thereby limiting the copying / pasting data in order to speed up the process), then that code would be great - I simply do not know what effect it would have.
The values thus copied will become my data sheet.
I have been trying to transpose a piece of code that was put on this forum back in 2005 into my own Workbook but have been unsuccessful. The original piece of code filtered a column for unique entries and then filtered the main sheet for each unique entry and cut and paste each row that the unique value occurred in and in a new worksheet. A new worksheet would be created for each unique filter.
So what I am trying to do is look up a list of values that i have in a list on the worksheet. Then for each entry in my list, create a new page and cut and pasted the filtered main worksheet into that page.
Finally return to the main worksheet and then remove all filters.
I have attached the original file that was submitted so you can look at how it works and I have posted a sample my worksheet (with some things disabled to reduce file size but hopefully you will get the layout. However I don't currently have that sample on this computer. It is posted on another thread under the title "Selecting rows with specific values in a column".
I thought that SUMIF FUNCTION should work for what I am trying to achive but it does not look like.
Here is the example: 1,2,3 etc. are rows and A, B,C - columns
A B
1 Gain (Loss) on Balance sheet reval, 91105(2,035,611)
2 Expense
3
4 NET Gain (Loss) on LTD 945,600
5 including Hedge on $ million Revenue
I need to write the formula in cell e.g. A8 that would look at my either "Expense" or "Revenue" and sum it if it is revenue or sumit if it is expense. I have the whole spreadsheet of rows and the label "revenue" or "expense" repeats almost always after 2 rows.
I have a table (Arrears) showing a list of customers with part numbers and quantities in arrears. A second table is a customer order table showing details of what needs to be shipped for a given date.
Based on these two tables, I would like to add a column to the Order table to show the values for arrears against the order quantity for the given date. In addition if there are no order requirements but there are arrears then insert a row to show the corresponding arrears.
see the attached spreadsheet for more details. This shows the two source tables (Arrears and Order) and the expected results showing the added column for arrears and the inserted rows.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
Macro that would add these values?
That is D29 + E29 or E 30 or E31 + F 29 or F 30 or F 31 + G 29 or G 30 or G 31... and on?
Even though I wrote "or" above, i would need the other values to be added in a separate calculation, until all possible permutations of D and the following 8 columns and 3 rows of data are exhausted.
Column A of my spreadsheet consists of Subcase 1000 to Subcase 1010 for example, with up to as many as 100 repetitions of each subcase in consecutive order. See Below:
Subcase 1000
Subcase 1000
.
.
.
Subcase 1001
Subcase 1001
.
.
.
Subcase 1002
Subcase 1002
.
.
etc
I would like a macro to find where Subcase 1000 finishes and Subcase 1001 begins and then insert 2 new rows between them. These 2 new rows have to be inserted between any change found in the column A field. The searching of Column A should start at Row 15. I have uploaded an example file. This file contains 2 sheets, 'Before Macro' and 'After Macro'. Hopefully it outlines what the outcome of the macro should look like.
I've posted this thread in http://www.excelforum.com/excel-prog...ml#post2038238 but since the thread has been solved, I think nobody would look into my problem, so I'm creating a new thread for the purpose.
My previous thread:
Hi there,
I'm looking for the same idea only that I wanted the macro to select the data in the cells selected. Based on the code given by StephenR above, I tried to do some modification but I don't know how to make it to start from the first cell of my selection, not from row 15 as R_S_6 wanted. The range selection can be in any column. Here are the code that I used:
I have a spreadsheet which will have several rows of data.
What I need is for some code to locate the duplicate values in the left most active column and then look over the rows that they are populating and delete and cells that are not present in each of the rows pertaining to the duplicate value in 1st Column and if possible remove all the blanks.
I have a sample, I will attach it and explain alittle better there.
Is there a VBA code I can use that will delete all rows that contain "ABC" or "YXZ" or "HHH" in column A ?
View 2 Replies View RelatedIn Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.
the row of numbers looks like this ....
I'm attempting to write a macro that will select all the rows which contain a value in a specific column. Say for example, all the instances of "test" in column C, I need to select the entire row with that value in the column.
I should also mention that by using an autofilter, only specific row numbers are selected. The source spreadsheet is dynamic and will not always display the same value in the same row, and thus I need something a little more adaptable.
How can I delete rows in a worksheet using values in a certain column as criteria?
Example: I want to delete all rows that show a value of zero in column k. How is this done?