Formulas Every X Rows With A Stop

Mar 23, 2007

I have this macro that adds whatever formula that is in L1 to the same cell down 66 rows. But it doesn't work like the way I want it to because it's stopping when it sees empty cells...so the problem is that my colum is actually completely empty...so how do I get it to stop when I want to?


Sub every66rows()
Dim i As Integer
i = 1
With Range("L1")
Do Until IsEmpty(.Offset(66 * i))
.Copy .Offset(66 * i)
i = i + 1
Loop
End With
End Sub

View 9 Replies


ADVERTISEMENT

Formulas Stop Working When Put The Rows Of Data To Test My Spreadsheet

Mar 17, 2009

I am inputting rows of data to test my spreadsheet and all of the sudden the formulas stop working??

Can someone take a peak at it and see if they can tell why its no longer working at I19?

View 5 Replies View Related

Stop #N/A! In Formulas

Dec 6, 2006

I have made a sheet that contains a formula that links to another page and until I have a number in that cell the cell with the formula says NA is there a way I can clear that so it wil be a blank cell until I put a number in.

View 9 Replies View Related

Stop Zero Showing In Formulas

Nov 13, 2006

when I apply an = 'Worksheet1'!A1. formula to a cell, the respective cell will contain a zero. Is there any way that the cell can be shown as completely blank and still hold this formula?

View 3 Replies View Related

Stop #N/A In Lookup Formulas

Nov 20, 2006

I have a list that I have validated as a list with a blank on top to enable data override.

I have a formula that uses the content of this cell, c7 say, to perform so vlookup function and return a result. However, when the cell c7 is blank( meaning the blank cell in the list is selected), the result is #N/A.

I am trying to have that result be a blank.

The formula is as follows, assuming c7 is the data containing cell:

=IF(OR(LEFT($C7,1)="W",VLOOKUP($C7,Table2B_1,7)>9,ISBLANK(C7))," ",VLOOKUP($C7,Table2B_1,2))

View 3 Replies View Related

Web Query, Stop Formulas Shifting

Sep 21, 2008

I had a sheet that had a web query imported into it which took up columns A to F. The web query varies in length upon every refresh. In columns G onwards i have lots of formulas that read the information from the query to produce results.

When i imported the web query, on some refreshes it has the ability to push my formulas down in certain columns. I'm assuming this is because the length has changed of the web query maybe? Although it can do it on the opening import of the query which i find strange.

I was told the best way around this would be to put my web query on another sheet, however this doesnt appear to have fixed my problem.

Lets say for example #Sheet1!A1 looks at #Sheet2!A1, #Sheet1!A2 looks at #Sheet2!A2 and so on. This will work fine. When the web query is imported into Sheet 2, its data goes down to cell A72. Upon another refresh though, the length will changed and now the data might go down to cell A81. However, #Sheet1!A72 will have changed its formula to look at #Sheet2!A81 and my formulas on Sheet 1 will now read as follows:

#Sheet1!A69 = #Sheet2!A69
#Sheet1!A70 = #Sheet2!A70
#Sheet1!A71 = #Sheet2!A71
#Sheet1!A72 = #Sheet2!A81 <----- Problem!

Basically the problem with this is Sheet 1 will not be including Sheet 2 A72:A80 which i also need.

View 9 Replies View Related

Formulas Change When Column/row Is Deleted. How Can I Stop That

Nov 11, 2006

I have a spreadsheet that holds the NHL schedule for the season. (See thumbnail)

In the picture I've highlighted the formula I use to determine how many games each team has over the next 7, 14, 21 and 28 days. What I've been doing is deleting the column for each day after that day has passed. (So tomorrow, I'll delete column K, and all the other days will move up one. Sunday will become column K)

My problem is that the formula =7-COUNTIF($K3:$Q3,"—") in cell G3 will read =7-COUNTIF($K3:$P3,"—") after I have deleted Saturday, and thus will only count 6 days worth. (The 14, 21 and 28 columns will only count 13, 20 and 27 as well.) Is there any way I can write this formula so that it stays as K3:Q3? Right now each day I modify the 4 formulas for the 1st team and then copy/paste then over the other 30, but this is rather tedious.

View 11 Replies View Related

Stop Cut And Paste From Wrecking My Array Formulas

Feb 24, 2010

I have a worksheet "Expenses" with columns Month, Category, Expense, Amount. There are four categories and, obviously, 12 months.

In the workbook is another worksheet, "Totals" which lists the months across the top, and the categories down the left. Then I have array formulas in each cell, that look like this:

=SUM(IF(Expenses!$B$2:$B$990="July",IF(Expenses!$C$2:$C$990="Acquisition",Expenses!$E$2:$E$990,0),0) )

This works fine, until people start moving cells around in the Expenses sheet. Say they sort everything they've put in by month, and then they want to move July up to the top because it's the start of our fiscal year. So say they have six expenses for July and they cut and insert them in at B2. Suddenly the formula now says:

=SUM(IF(Expenses!$B$8:$B$990="July",IF(Expenses!$C$8:$C$990="Acquisition",Expenses!$E$8:$E$990,0),0) )

I thought by using absolute cell references instead of relative ones, I could avoid this problem, but that's apparently not the case. I tried changing the cell references in the formulas to relative ones but it still happens then too.

View 2 Replies View Related

Highlighting More Rows Than I Want To - How To Stop Please

Nov 28, 2009

I am using a 2007 excel spreadsheet and on parts of it I can't just highlight one horizontal row of cells, it wants to highlight three down. I suppose that I have asked it to do this but I can't for the life of me undo it.

I have tried unmerging cells, cutting and pasting somewhere else, but nothing works.

Can anyone help me please as it's driving me to distraction?

View 7 Replies View Related

Stop Blank Rows Printing

Dec 1, 2006

I tried to reduce the size of the printing area by deleting the blank rows. To achieve this I entered VBA code that appeared in the newsletter issue 3 after slightly modifying the code suiting to my need. But, while exeucting the code with all the parameters, xlCellTypeBlanks, xlCellTypeFormulas,xlErrors, the error as shown as a screen shot herein is populated. But, with the parameter,""xlCellTypeBlanks"" all the Blank Rows only got deleted and similarly only those rows containing Formulas are deleted, while the parameter is""xlCellTypeFormulas".

I want all the cells that contain xlFormulas, xlErrors and xlCellTypeBlanks as well be removed while executing the code given herein. But, if the range contains "xlFormulas" and "xlCell TypeBlanks", the rows containing blank cells are not removed and vice versa.

View 2 Replies View Related

Stop User Changing Rows

Jan 19, 2007

Is there a general way to disable a user from changing row size or adding new rows.

View 7 Replies View Related

How To Stop Rows Resizing With Text Which Paste Into Cells

Sep 10, 2013

how to stop rows resizing with text which paste into cells

View 1 Replies View Related

Excel 2010 :: How To Stop Macro From Sorting Hidden Rows

Feb 3, 2014

I recorded a simple Macro in Excel 2010 to sort data by the first Column, heading "Ref". I have assigned CTRL + e as the keyboard shortcut for this.

My sheet contains a number of hidden rows (as I hide rows when I have finished working on that issue).

When I run the macro, it does sort by the number of Column A, but also, the hidden rows are then shown again.

I realise I could just click on the A-Z sort button to stop this happening, but I really like being able to use keyboard shortcuts, which is why I tried the macro route.

I wondered if it is possible for the macro to ignore hidden rows?

Code:
This is the macro:
Sub SortByRef()
'
' SortByRef Macro
'
' Keyboard Shortcut: Ctrl+Shift+E

[Code]....

View 1 Replies View Related

Stop Macro: Button To Hit Or Better Just Some Keys To Hit To Stop It Without Using The Ctrl+alt+del Which Closes Everything

Dec 13, 2006

my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.

View 4 Replies View Related

Add Rows With Formulas From Above

Nov 29, 2006

I am trying to use a button on the top of the sheet to add a line from wherever they are in the worksheet with the formulas on the above row. Example: 0=formulas

0---------------0---------------------0--0
they are here beneath the line
they press the button on the top of the sheet
0---------------0---------------------0--0
the row is created above the current cell their in with the exact formulas intact.
I am trying to have the sheet protected (so the formulas are not seen) but in order for the user to add a line they have to copy and paste the formulas above to the new line which can't be done when formulas are protected.

View 6 Replies View Related

Avoiding Formulas In Many Rows

May 7, 2006

I have a simple spreadsheet that will be used by others for records management (rehabilitation case management). I have entered the code for most of the 'stuff' that I need to make the workbook easy and simple to use, and get the data back to head office each month.

Because the users will be emailing their records and I haven't yet worked out a way of sending just the "open cases", I need to keep the workbook/worksheets small (and to maintain good programming).

In column L, I have copied this formula from L2:L501:

=IF(ISBLANK($K2),"",VLOOKUP($K2,LOCSTAT!$A$1:$N$299,2,FALSE))

Column K is where the case-managed person works and so column L returns the geographical location value. Obviously it's blank until the case is opened by starting a new record and entering each field with data. For example, the user can select " Finance" from a validated drop-down list and the adjacent cell (to the right) will look up the value and return "Parramatta".

How do I translate the cell formula to some VBA?

I suspect that the static VLOOKUP range in the formula (LOCSTAT!$A$1:$N$299) will need to be dynamic range as well - I can follow the instructions for a single column dynamic range, but I am also getting lost working out how I can create a dynamic range for all data on a dedicated worksheet.

I'll be able to translate a solution to other cells as well

View 8 Replies View Related

Code To Add Rows And Continue Formulas

Jan 25, 2014

I am looking to create a userform to add new rows to a sheet, and continue the formulas in certain columns.

The user starts by entering a number in the text box tbRowAdd. When the user clicks on the button called btAdd it first checks to make sure the number entered is equal to or between 1 and 1500. If this is not the case it should display a message box saying "You must enter a valid number from 1 to 1500 in the tex box."

If the number is valid it should then add that amount of rows below the current active cell in the worksheet ReturnData.

It should then continue the formulas in the A, B, C and F columns. The formulas are as follows:

A: =IFERROR(IF($D6="", "", ROW($A6)-ROWS($A$1:$K$5)),"")

B: =IFERROR(RANK($C6,$C$6:$C$99986, 1),"")

C: =IFERROR(IF(OR(AND(ReturnData!$D6>=Search!$E$1, ReturnData!$D6<=Search!$E$2),OR(Search!$E$1="", Search!$E$2="")), IFERROR(SEARCH(Search!$E$3,$E6,1),"")-(-IFERROR(SEARCH(Search!$E$4,$F6,1),""))-(-IFERROR(SEARCH(Search!$E$5,$G6,1),""))-(-IFERROR(SEARCH(Search!$E$6,$H6,1),""))-(-IFERROR(SEARCH(Search!$E$7,$I6,1),""))+ROW()/100000, ""), "")

F: =IFERROR(VLOOKUP($G6, EquipmentData!$B$3:$C$1048576, 2, FALSE),"")

Each number in bold should match the row number (I dont know if this happens automatically or requires coding).

View 5 Replies View Related

Copy Formats/formulas In New Rows

Jan 1, 2009

I have a spreadsheet with customised formats and formulas and the problem is that when add a new row I have to go through and manually copy all the data to the new row and as there are many columns in the spreadsheet this takes forever.

Is there anyway I could automatically copy all the formats/formulas when I insert a row?

PS: I do not want to copy any data into the cell only the formatting and formulas

View 10 Replies View Related

Delete Rows Without Affecting Formulas

Sep 28, 2009

delete rows without affecting formulas

In general, when you write a formula:

In Cell A1:

View 7 Replies View Related

Enter Formulas Only On Subtotal Rows

Jun 22, 2012

a huge spreadsheet that is taking up way too much time. It starts out with 6,000-7,000 rows, but then, she does Subtotals & it grows to nearly 10,000 rows! Then she has to deal with each & every one of the Subtotal rows, by hand. Here is a small sample of the spreadsheet, after the Subtotals have been applied:

Manifest Dttm
Manifest No
Carrier Scac

[Code].....

This sheet has columns A-Q. The key columns for our purposes are K (Weight In Lbs), L (Pickup Charge) and M (Consolidation Charge). We need to add information to column R on each SUBTOTAL row only! On each row there will be an amount in EITHER column L or column M, but not both.

1) If the amount is in L and K is LESS than 488 then R needs to show 44.39.
2) If the amount is in M and K is LESS than 124 then R needs to show 3.82.
3) If either
a. The amount is in L and K is 488 or HIGHER or -
b. The amount is in M and K is 124 or HIGHER
THEN R needs to show a formula to do this: (L+M)/(K/100)

Is there a way to either put a formula in just the Subtotal rows to accomplish this or (preferably) have a macro enter either the 44.39, 3.82 or the formula? I was able to come up with a formula that gets the correct amount in col R. Here's my formula:

Code:
=IF(AND(M3=0,K3123))),SUM(L3:M3)/(K3/100))))))

View 6 Replies View Related

VBA Delete Rows And Insert Formulas

Jun 23, 2013

delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.

Account Number

211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount

[code]....

if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row

211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount

[code]....

View 2 Replies View Related

Inserting Rows While Copying Formulas

Jun 18, 2008

I have a spread sheet that I have locked with the expection of certain cells. I also have left the ability to insert and delete rows. The cells that are locked have functions in them run in sequance.

Is there a way that when the new row is inserted its copies the formula from the row above automatically but also adjust for the new row and adjusts the rows below it automatically?

For example if I insert a new row between rows 2 and 3 below.
(orginal layout)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (locked)(function is =sum(a3:b3)
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)

(layout after inserting row)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (unlocked) *inserted row*
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)
a5 (unlocked) b5 (locked)(function is =sum(a5:b5)


this is what i want the end product to be.
(layout if formulas are copied and adjusted after inserting row)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (locked)(function is =sum(a3:b3) *inserted row*
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)
a5 (unlocked) b5 (locked)(function is =sum(a5:b5)

View 9 Replies View Related

Copy Formulas From First Row To Multiple Rows With Some Changes

Aug 1, 2008

I have 100 excel file in a folder such as File1, File2, File3, File4 etc.There are some figures and reports on these files. format of all the excel files are same except values. And I have a master file.

As is:
On my Master file, I have n number of formulas in Row 10,which gets data from the above excel files.
eg. Master file Sheet1 Row 10,
I have formula like this from Column B
='[File1.xls]Sheet1'!$A$1 [File1.xls]Sheet1'!$D$1, ='[File 1.xls]Sheet1'!$A$1 [File 1.xls]Sheet1'!$M$1 etc.

In Row 11,

='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$D$1, ='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$M$1 etc.
If there are 1 or two files then I can type manually in each rows, But I have more than 100 files. So i need a macro which copies the formula from Row 10 to rest of the rows, If there are 100 files with different names in the folder, the formulas have to be copied to 100 rows in the master sheet.

if the file name changes on the formulas I will get the data correctly.

View 9 Replies View Related

Deleting Rows Without Modifying Formulas

Apr 9, 2009

I have a large amount of data on a sheet which is being looked at by the following formula

{=AVERAGE(IF(LEFT(RAW_DATA!$C$4:$C$10000,LEN(Dashboard!$I$10))=Dashboard!$I$10,IF(RAW_DATA!$A$4:$A$10000=$A2,RAW_DATA!$J $4:$J$10000)))}

However, i don't need to keep the oldest data so I want to write a macro that deletes some of the top rows. Doing this in the normal way causes the formula above to change. I.e deleting one row cause the range to become $J$4:$J$9999 and so on.

Is there any way of deleting a row without affecting the formulas that are looking at it?

View 9 Replies View Related

Formulas In Columns Converted To Rows

Aug 13, 2009

I currently have formulas in a column setup (equations are not actual)...

Cell B1: =IF(A2>A3,"Y","")
Cell C1: =IF(B2>B3,''Y",''")
Cell D1: =IF(C2>C3,"Y","")
....

I want to switch these to one long row from one long column so that they span from Cell A1, A2, etc.

When I special paste or straight paste it obviously alters the formulas because I am also unable to cell lock the current formulas.

I am wondering if there is an easy way to convert my formulas, currently along a column, to a row? Or if there is also a way to cell lock a large amount of cells at once?

View 9 Replies View Related

Convert Columns To Rows With Formulas

Dec 21, 2009

I have some mails in a colum and i would like to put with a formula into a cell.
For example, in column I have:

mail1@hotmail.com
mail2@hotmail.com
mail3@hotmail.com
mail4@hotmail.com
mail5@hotmail.com
mail6@hotmail.com

And into anything cell i would like to put with the coma:

View 9 Replies View Related

Fill Blank Rows With Formulas

Jan 4, 2007

I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.

View 6 Replies View Related

Delete Rows With Ivalid Formulas

May 17, 2007

I have a problem with deleting rows that contains invalid formulas, these formulas are generated randomly daily in rows that contain no data and refer to empty cells in the same row.

Is there a code to delete rows an empty row in that by data it is empty, but not so because there is a formula?

currently this code of mine doesnt work on the zero data but formular-ed cell.. cause counta on the cell gives me 1

Dim i As Long, EmptyR As Long
EmptyR = ActiveSheet.UsedRange.Rows.Count
For i = EmptyR To 1 Step -1
If Application.CountA(Cells(i, 1).EntireRow) = 0 Then
Cells(i, 1).EntireRow.Delete
End If
Next i

View 9 Replies View Related

Formulas To Occupy All Rows. Good Or Bad?

Jul 2, 2008

Cell A1 can have only 0 or 1. Cell B1 can have any numeric value. Cell C1 takes the value of B1 if A1 is 1, otherwise it is 0. So, C1's formula can be either "=A1*B1" or "=If(A1=0,0,B1)". Lets say this formula is continued down to the 65000th row. My question is which formula is faster? The first one or the second one?

View 2 Replies View Related

Copy Rows Formatting And Formulas But Not Values

Jun 4, 2009

How would you copy a row's formatting and formulas but not value. for example: A1 1 B1 =a1+2
I would like the copied row to be: A2 (blank) B2 =A2+2

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved