I have been using the following formula to add time (hh:mm) in the last 28 rows (inclusive) of Column B into an adjacent cell in Column C (Column A is the date):
=SUMPRODUCT($B1177:$B1204)*24
It is becoming tedious to copy/paste the formula - Is there a formula that would define all cells in Column C to be the sum of the last 28 rows of Column B?
way I can search a particular column, and when results are found, copy the rows where the results are to a new worksheet? And perhaps reuse the same worksheet (so clear the sheet on every execution)
I have tried auto and advanced filter but its not really working to my liking....
I am trying to make a column show the result of a formula as positive number only. Right now the column subtracts two other cells and displays the result. I am trying to make it show all the results, positive or negative as positive.
View 3 Replies View RelatedI have an excel spreadsheet example attached. I want to filter all rows in my full spreadsheet which have "OA" under Group code column and then be able to print these to their own spreadsheet. This way I don't have to scroll through thousands of rows to find each one individually.
View 3 Replies View RelatedI'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I have a lots of number arranged in a column. I want to take log of each number (on the base 2) and show the result in the adjacent column. I want this to be in a macro and the results to be displayed all at a time (I dont want to drag the cursor down to get log values for number corresponding to each row).
View 6 Replies View RelatedI would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
how can I count the number of not empty rows(and for example too many) using do.. until loop kind. I am searching on the net for about 24 hours but I couldn't find it.
View 5 Replies View Relatedhow to get the number of rows with data in a particular column.
Date
12/2
11/3
10/2
11/4
here DATE is the column heading
and here number of rows with data is 4
HOW to get it from VBA statements
I am working on a sheet that has dynamic data saved. For any new value, a new row is inserted. I want to add a counter or more like an index so that I can see the number of the rows. I know that excel has is on the side but, I want to be able to make calculations. Like average of the numbers. Lets say I have 512 rows added. I want to be able (automatically via vba) to set the average with a sum of the values/ 512 which will be the number of the code I am asking. So I want a code that will start with the number 1 at (lets say) cell B2 and it will go like B3=2, B4=3.... any time a new row with data is added.
View 9 Replies View RelatedI have an excel spreadsheet in which I would like to number the rows in column B from row 4.
Code I wrote:
In the code below, a formula is placed in column F to compute the total of that column. I first find the number of rows and place the formula in the cell below it. I'm dividing the sum by 2 since there are subtotals in the column.
Sub AddColumn()
Dim NumRows As Long
NumRows = Range("A65536").End(xlUp).Row 'get the row count
NumRows = NumRows + 1
Worksheets("Report").Cells(NumRows, "F").Value = "=SUM(F9:F308) / 2"
End Sub
The problem with the code is that I don't really know that the last row in the column is F308. I need to replace that part with a variable. It will be something like this (which I know is incorrect):
Worksheets("Report").Cells(NumRows, "F").Value = "=SUM(F9:NumRows) / 2"
How would I use a variable in the SUM function in place of the cell names? Should I even be placing the formula in a cell, or should I compute the sum in the macro and place the value in the cell?
I am copying various rows from one spreadsheet to another (sheet3) and would like to total one of the columns. The trouble is that since I don't know how many rows there will be I am having trouble inserting a formula that will work. I am sure that there must be a simple solution but I can't seem to find it.
View 2 Replies View RelatedI have formulas in cells B8:F8. I need to copy these formulas down based on the number of rows in column A that has data. The data in column A will vary based on user input.
View 2 Replies View RelatedI'm trying to create a macro that transposes data from columns to rows.
My source data is laid out so Column A and B contain item identifiers, and then the header for Column C to Column S contain dates (March, April, May, etc) and the row data below contains quantities for each month. This is on Sheet1.
I need my end data (on Sheet2) to have the item detail in Column A and B, the quantity in Column C and the Date in Column D. If there is a date that has no quantity then it should be skipped.
Sample Source Data (Pipes added for clarity, they aren't in the actual data)
Part |Description |June 4 |June 11 |June 18
A | PartA | 5 | | 12
(Please note June 11 has no quantity)
Sample Destination Data:
A | Part A | 5 | June 4
A | Part A | 12| June 18
Below is the start of the code, obviously I have a ways to go before it's fully functional but hopefully you get the idea how I'm trying to attempt this. Where I'm having issues right now is referencing columns by number. Is there a way to do this so I can do Column = Column + 1 to advance columns to the right? Or any better way to address this all together?
HTML Code:
Sub ConvertToRows()
Dim ReviewRow, ReviewRowEnd, PasteRow, ColumnNumber As Integer
ReviewRow = 2
[Code]....
how to code VB to where when data is sorted a formula can be placed at the bottom a column to sum or average the above data?
I have tried relational positioning e.g
each time a row is created, integer n5 = n5 + 1
Application.CutCopyMode = False
ActiveCell.Offset(rowoffset:=1, columnOffset:=12).Select
ActiveCell.FormulaR1C1 = "=sum(r[" - " & n5]c:r[-1]c)"
ActiveCell.Offset(rowoffset:=0, columnOffset:=7).Select
ActiveCell.FormulaR1C1 = "=average(r[" - " & n5]c:r[-1]c)"
Application.CutCopyMode = False
n2 = ActiveCell.Offset(rowoffset:=1, columnOffset:=-19).Address
n5 = 0
Where n5 is augmented each time a row is created then set to 0 to count the next list
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I have an workbook (AUTHPbWB) that has a sheet(Replacement) where data is input by end-user. it also has a button(Accept) which stores data in another worksheet based AUTHPbWB cell value D5. The variant data is in range B8-h15 of AUTHPbWM/replacement. When the accept button is clicked, it searches the database sheet for the next available row and inserts the new records. The database sheet has column A that has predefined values that should not change.
what im looking to do is, on clicking the accept button and when the records update in database, the corresponding values in column A of the database sheet get copied to another worksheet (data) only for the new records updated.
[Code] .....
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.
View 2 Replies View RelatedI have a count for each site for certain cloumn headers.
But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.
eg:
a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites)
sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)
I am using the SUBTOTAL function, with reference value 4 to return the max value from a filtered list.
What I'd like to be able to do is return the values of cells on the same row of the returned max value. Effectively if I can extract, somehow, the row number of the row where the max value exists, then I can use that to get the rest, but I'm at a loss as to how to do this,
I work in a finance dept and we often need to divide our numbers into 12 months but I need to only work with whole numbers, not decimals. Is there a way for example of forcing either in a formula or with VBA code to get 10,000 to divide equally by 12 months? At the moment it comes out at 833.333333. What I want is something that randomly assigns 833 to any one of the 11 months of the year and for the other remaining month put in the difference which is 837 to get the total to add up to 10,000exactly.
View 9 Replies View RelatedIs there a way to tell Excel to sum only up to a certain point? Like if A1 through AF equal 50, but I only want it to sum up to 40, to stop at 40?
Is there also a way to tell Excel using IF that if a statement evaluating a number is true or false, to return the value up until a certain number. For instance, if the value is 8 or less, then it should return that number, but if it exceeds beyond 8, say for instance 12, then if the value is 12, only return 8.
I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.
I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.
Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)
Syntax error here:
I want to subtract column B from column A and put the result in column C. If the result is a negative I want a formula to turn it to 0.
View 4 Replies View Related