I need help creating a formula. I have an amortization table and I need to take each months information and place it into a cell which resides in a letter. In the end, there should be 180 pages with different dates, interest, principal and total payments. I know that there is a way and I can not figure it out.
View 9 Replies
I am trying to use the if function in an amortization table and I am wondering if there is a way to make it so if I cut the years in half if I can make the table read with 0's or dashes rather than to start counting back up again.
View 9 Replies View RelatedI'm trying to make an amortization table with all the individual payments. I'm trying to avoid putting in the formula manually into each individual cell. I have a formula = ROUND(F11*0.12/12,0) and I want to insert that formula down an entire column, but increasing the F11 to F12, F13, etc.
View 4 Replies View RelatedI have a sheet (like example attached). it's broken out by month for many decades. certain columns like B-N need each field populated. There are others like O, P, Q, where I need to delete all cells except for 2 months that year (in this example, all except May and November).
Is there a shortcut method to do this quicker?
example.xlsx
I am working with an amortization table and need to work out the elapsed time to amortize the loan.
Currently the worksheet is working fine and calculates the end date of the loan but the length of the column varies depending on the scenario.
I need a formula to calculate the time that elapses between the first date and last date.
The data starts in cell b13 and the last date could appear in pretty much any cell below that, so the formula will need to look for the last valid entry.
I am using excel 2003.
I am in need of a formula to calculate monthly straight-line depreciation assets based on the current month’s days.
So, if an asset costs $10,000 and has 15 years of useful life, in June this would calculate 15 divided by 12 divided by 31 times 10,000. I want to put cost in one cell and date in another, for the formula.
BTW, someone is using this formula, =(16736*(1/15)*(6/12))*31/184
I am looking for an amortization formula sheet for a boat loan that I have. That is easy enough, and I found that, but here is the hard part.
I went in on the loan with 4 different people all paying different prices a month. Let me get specific - I have a loan where one person is paying $55 a month, another $30, and three more $35 each. For a total of $190/month for the boat loan.
I want to be able to keep track how much each individual person owes in principal and in interest. Those prices a month are the minimum they will pay each month, but if someone decides to make more than the minimum payment, then it will mess everyone up with the total amount that they still owe.
So basically even though it is more one big loan, it is actually a total of 5 smaller loans as well with the same interest rate, but different minimum payments a month.
I'm working with a loan amortization worksheet (downloaded from Office Online). Unless I don't understand correctly, the date formula on the worksheet doesn't calculate the way I need it to. I'm not totally sure what the formula they use is doing. It does use a lot of named ranges.
If a user inserts the total "Number of Payments per year", then I want the date to return the proper payment date.
For instance, If the start date is 1/1/07 and the number of payments per year is 24 then the payment dates should be like
1/15/07
1/31/01
2/15/07
2/28/07
It should be the 15th and the last day of the month.
If I put 52 as the number of payments then I want the formula to set the payment dates to every Friday.
I'm still learning formulas so bare with me guys. Attached is the worksheet.
I need to create an amortization table for several thousand loans. I could create a seperate amortization schedule for each loan, but as you can imagine, doing so would take a long time.
These loans have varying interest rates, loan periods, and beginning balances, so it is not as if I could just add the beginning balances together and amortize on that basis.
It seems like this will require a VBA macro, however my programming skills are a little rusty.
There are various references and links to " mortgage calculators;" though they are specific to the US dollar. Is the formula still the same, irrespective of the currency and why does it come across as quite a complex calculation? i have been taksed with designing a "calculator" and don't seem to know where to start as the currency issue is confusing me.
View 7 Replies View RelatedHow to calculate a One time Payment to maintain the Tenure In Amortization?
Ex:-
I havea loan of Rs 1,00,000/- to be paid @ 8%/12 for the first year and then from 13th month , it will be Floating Rate of Interest which would be mostly higher than 8%/12...
I will be paying this loan off in 5 years ( i.e. 60 months)
and the EMI = Rs 2028/- per month..
Lets say, if the Interest goes up to 12%/12 after the 12th EMI then the tenure increases by 5 months from 60 months to 65 months thus adding to the cost of Rs 2028*5 = Rs 10140 more..
Now What amount do I need to pay alongwith the regular EMI's to maintain the tenure of months?
The amount Im referring to is a One-Time Payment added with the EMI for the 13 the mOnth to reduce the Principal and accordingly the tenure?
I have a spreadsheet that has amortization tables for several loans. I am trying to add a summary tab that will pull the next due date on each loan. Some of the loans are behind so I can't use a >today() function. I have been trying the following:
=MIN(IF(AND(ISBLANK(Smith!A:A),NOT(ISBLANK(Smith!B:B))),Smith!B:B))
Column A is date payment is actually made, and column B is due date, so I want to return the first column B that has nothing in column A.
I am using Excel 2003 and I created an amortization schedule set up for an debt account. I am trying to pull the "Balance Due" from that schedule into another chart based on the current date (these are on two different sheets in a workbook).
For example, this is my 'Amortization Schedule':
Balance
Due
Interest
Rate
This Month's
Interest
This Month's
Payment
[code]....
And I am trying to pull the "Balance Due" from that schedule to place into this chart on my 'Debts' sheet: (based on the current date)
Name
Starting
Balance
Remaining
Balance
Interest
Rate
Minimum
[code]....
For example, if today were 1/15/13, I would want $3,796.34 from the schedule to go where the "x" is on the chart above. What formula would I use to accomplish this?
Also, on a side note, would there be a formula to have Excel pull the "Payment Date" from the schedule into the "Payoff Date" in the chart based on where the row has a $0 Balance Due?
I have uploaded a sample amortization schedule.
1. I require the table to adjust itself based on the loan period and number of payments per year entered in D14 and D15 respectively.
2. Also, if a value is entered in column E, then i require the whole table to update as well.
I have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
In a spreadsheet I have a large table in one tab with a row of numbers, and column of numbers with an array of numbers under each.
Closes example I could find on google is ....
I have attached a table that I want to obtain the value for another worksheet. It is reliant on two other values in a different worksheet. Term value is picked up from a cell with a drop down box that has a HLOOKUP formula. The dollar value is picked up from another cell that is the total of several elements. I then need to work out the monthly finance term from the above table dependant on these two factors.
View 2 Replies View RelatedI have a pivot table having 5 columns, where the 1st 2 columns are the side label (rows) and the last 3 columns are the facts (data). The side labels are named as Sales Executive and Customer Name respectively. The facts labels are Last Year Qty, Current Year Qty, and Business Plan Qty. The data for the pivot table are extracted from the legacy database.
Sales Executive | Customer Name | Last Year Qty | Current Year Qty | Buss. Plan Qty
I want to add computed columns to check the performance of Current Year Qty as against Last Year Qty (vs LY) and Business Plan Qty (vs BP).
Sales Executive | Customer Name | Last Year Qty | Current Year Qty | Buss. Plan Qty | vs BP | vs LY
If I will create these additional columns outside the pivot area chances are it will not be updated in reference to the rows in the side labels especially when there’s a new entry in the Sales Executive or Customer Name columns. Is there a way in which the “vs LY” and “vs BP” columns would automatically be updated when I refresh the data in the pivot table? Can it be done inside the pivot table? How will I do that?
I wanted to know if there is a way you can add a formula to pivot table. In the attached file, i'd like a row in the pivot table which should be (sum of number 2)/(sum of number 1) for each color under the fruit. ie. the row that is in column E should actually be a part of the pivot table itself. is this possible ?
View 3 Replies View RelatedI am currently using the following formula:
=VLOOKUP($A$3, Sheet1!A:B, 2, 0)
=VLOOKUP($A$3, Sheet1!C:D, 2, 0)
=VLOOKUP($A$3, Sheet1!E:F, 2, 0)
The problem is I am trying to get the table Array portion (A:B , C:D , E:F etc.) to auto fill when I drag it across and it will but not correctly. How to autofill with the pattern that I need?
Currently it would auto fill with D:E , F:G, H:I G:H I:J
I use a workbook that records data centered around course referrals.
The workbook also has a stats page. It records Instructor stats but needs to be in the form mostly of percentages.
In Column D within the page Stats I need the cells to show the total number of "YES" that each Instructor has achieved from their number of pupils in the Sheet Data.
Column E and F in Stats need to show the percentage of Yes and No of each Instructor from Column D in the Sheet Data.
Column G In Stats needs to show the number in total of Referrals made by Indivisual Instructors taken from Sheet Data.
Columns H,I and J in Stats need to show the percentage of referrals to OBT,Kaya and HWal made by the Individual Instructors taken from Sheet Data.
Finally in Stats, Columns K,L and M need to show the percentages for each Instructor of their Leave Reason again Taken from Sheet Data.
Usually there are several hundred entries and at the moment I do this manually with a calculator.
I'm trying to sort a table as displayed in the image below. The table consisting of items in column A, here fruits, and a column E where totals over three month is displayed.
I have entered an array formula in column H where the total of each fruit is summed and then sorted in descending order. My problem is that whenever two fruits have equal value (here, apple and pear), Excel will not manage the display of both fruits, it will just display the first twice. The formula in column I is a simple SUMIFS.
It doesn't matter if Apple or Pear is displayed first, but I need both items to be displayed in column H.
excel1.png
I need to find a forumula that will enable me to transfer values from a table within the worksheet. Something along the lines of if I13 = A16 then need to enter the number that appears in A17 into cell 019, if I13=B16 enter number in B17 into 019. I also need the forumula to include if the figure in 113 is less than 3 then need to enter 0 into 019.
View 14 Replies View RelatedI am creating a helper table so then I can graph my information. But the formula I am using gives me the information. The problem is it skips the first row for every school. So when I select the school's name from the drop down menu in the schools dashboard sheet. The table should update with the grade level.
For example; I select school 1 which has grade 3, 4, & 5. but when I look at the helper table what comes up is grade 4 and 5. the formula I am using is
{=INDEX('2009DATA'!$C$1:$1000,SMALL(IF('2009DATA'!$A$1:$A$1000=$E$3,ROW($A$1:$A$1000),""),ROW()-1))}
I am trying to set up a football league table. Iam ok with most of the formulae to arrive at a points total. However when the points total of two or more teams is the same then the final position is governed by goal difference.
View 11 Replies View Relatedi have a table with year and day in rows and months as columns. I'm looking for a formula that will look up a number in that table based on the date given in colP and put the number in Q. See example.
View 2 Replies View RelatedI am trying to use a vlookup formula on a sheet with a table.
When I use =VLOOKUP([@[Loan Number]],Sheet2!A:B,2,FALSE)
It returns N/A as I would expect because I am not looking up based on the loan number.
When I use =VLOOKUP([@Processor],Sheet2!A1:B18,2,FALSE) the formula does work and displays the text "=VLOOKUP([@Processor],Sheet2!A1:B18,2,FALSE)"
I have also tried to reference the cell number with no success or =VLOOKUP([@[Processor]],Sheet2!A1:B18,2,FALSE) with no luck.
Can we apply any formula in the pivot table?
View 1 Replies View RelatedI'm trying to come up with a formula to find and proper sum the value in a table like this one:
Month/year
1995
1996
1997
1998
Jan
3,63%
0,86%
3,5%
1,5%
[Code] .........
But the actual table goes till december and the years till 2013. For instance, if I need the cumulative index from, let's say, jan/2010 to feb/2013, I'm having trouble with this formula. I can't get excel to sum them properly.
I'm trying to create a dynamic sum formula off of a table of data which is then used in pivot tables and pivot charts. What I would like it to do, is show me the summation of values AFTER a filter has been applied. Everything I've tried returns a sum of the entire table (includes hidden cells). Perhaps I'm searching with the wrong query terms (this not called a dynamic sum formula?)
Using slicers and pivot charts, I need my account managers to be able to look at their territories quarterly performance vs. a "fair share" of company performance during that quarter. I.e. they would select the slicer for their region, and dates (ex april, may, june) and the pivot chart would show territory performance during that time, with a second column chart series which is company total from april/may/june (my dynamic sum) divided by the 8 territories...thus giving me what should be "fair share" during that quarter. Each territory has equal Opportunity, so this would allow them to see who is over-performing and underperforming in their territories.
