I have attached a table that I want to obtain the value for another worksheet. It is reliant on two other values in a different worksheet. Term value is picked up from a cell with a drop down box that has a HLOOKUP formula. The dollar value is picked up from another cell that is the total of several elements. I then need to work out the monthly finance term from the above table dependant on these two factors.
View 2 RepliesIm trying to create a 'drill-down' interface with the GETPIVOTDATA command.
I believe (but im not sure) that this will require several different formulas.
e.g., assuming this formula resides in A1, this returns all data in the pivot $A$6 for Monday of 6/1/2009:
=GETPIVOTDATA("Sum of Mon",$A$6,"Week", DATE(2009,6,1))
however for cell A1, if the user wants to drill down, then the required formula expands to the following..in this case we are drilling down to Name=Baby Becket/Ball, Stage=Infant..and so on..
=GETPIVOTDATA("Sum of Mon",$A$6,"Name","Baby Becket/Ball","Week",DATE(2009,6,1),"Stage","Infant","B/L","B","WL",)
Essentially, without writing a bunch of IF's in the formula for A1...is there a way to put these formulas in a lookup table, and then depending on what the user chooses on how they want to analyze the data (e.g., they may select Name, Stage, etc from a drop down list elsewhere on the sheet), the appropriate formula is populate in A1?
In a nutshell: Can the formula of a cell be changed depending on what the selection value is of another cell or list value?
This could probably been done easily via VBA, but if there is a formula or vlookup based solution that would be easier..
I'm wanting to copy all data from my pivot table expect for the last Column, "Clients" and paste it as html in an email using a caller called function. I have been able to get my data, but lose all the pivot table design formatting when using the below:
[Code] ....
and my paste code is as follows:
[Code] ....
I've also tried the .pivotfields("clients").orientation=xlhidden but didn't work for me. It only copied blank data and also hid that Column from my actual source pivot table.
I have a pivot table with report filter as "Date". I have a variable with date 01/06/13 ( passing the date in the variable using inputbox). I want next available option should be selected after 01/06/13. For example there are four options in Date (report filter) i.e. 01/06/13,02/06/13,03/06/13,04/06/13. if value of variable is 01/06/13 then selection in the pivot table should be 02/06/13. if it is 02/06/13 then selection in the pivot table should be 03/06/13.
View 3 Replies View RelatedI have a cell with data validation that I would like to look at table and be dynamic rather than a manual selection. So when I add to the list the data validation will reconise there are more options.
View 7 Replies View RelatedI am using Excel 2002..
I have a spreadsheet that is used continuously. It is reset each month. My pivot table dropdown selection (Data) has data from previous months. How do I delete this data?
I have a macro that I would like to run once I change a selection in my pivot t able. is this possible?
View 4 Replies View RelatedI'm trying to return 2 values from a table selection, based on a value i.e. if I look up the table for "Team 1" - i'd like to return Team 1 v Team 6, Team 9 v Team 1, and so on, to a Fixtures Section in a different area of my Excel Sheet.
However, the look up value "Team 1" could be in column J or N. I've tried Index, Match, VLookup, IF statements etc....
See below:
J
K
L
M
N
[Code].....
I have a Pivot with a Userform containing 3 cascading Listboxes, each listbox fills down to the next. What i am trying to do is have the result of the listboxes to filter the Pivot table. Keeping it simple for a moment, in listbox1 user has a list of Departments and clicks "Liquor" then the Pivot should only show items within the "Liquor" departments. How do i achieve this? Also when looking at other treads and seeing the code offered, should i be trying to filter the Pivot Table field in the Page or Row area?
View 6 Replies View RelatedHow to filter one of the Pivot Table Combobox, according to selection of another Pivot Table Combobox?
View 7 Replies View RelatedNeed achieving the following:
I have 2 sheets in one workbook, the first sheet named D1 where I have dropdown menus and the second sheet called reference where I have fixed data
what im looking for is when the user select an option from the dropdown menu on cell b3 on "D1" sheet based on the selection an entire table (4 rows by 3 columns) called "Default" from reference sheet to be automatically pasted into the D1 sheet.
Possible to get a pivot table to automatically expand the range selection of data as it grows. I have a worksheet that grows daily and I am running a pivot table from this. If I refresh the pivot table it doesn't pick up new data unless i change the range or i have a huge range selected in the first place. Problem is if i select a huge range then the grouping options i am using won't work correctly.
View 5 Replies View RelatedI have two pieces of code that perform virtually identical functions on different sets of data.Basically, the code deletes rows of data based on a selection in a listbox. One code works perfect, the other has an issue.
The Issue:
When I select a single row for deletion, or multiple contiguous rows, everything works fine. It is when multiple Non-Contiguous rows are selected that the problem occurs. I get a "Delete Method of Range Class" error.
The data for the code that doesn't work is in a defined TABLE, the date for the code that does work isn't. So I assume this is where the problem lies.
I converted the data for the code that did not work from a table to a range, and everything works fine. However, I would really prefer that this data remain a table. There is consistently going to be rows added and deleted, and a table will take those adjustments into account, whereas a named range shrinks each time I delete a row, and doesn't grow as I add rows.Here is the code that works:
VB:
'Delete Selected Offers
Else
For r = 0 To ListBox1.ListCount - 1 [code].....
I'm making a macro that filters a data set and then inputs a value into all of the rows for a certain column. When no results show up for the filter I receive a runtime 1004 error because there are no cells to select.
Here is my code:
Sheets("External Buys").Select
Range("G5").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Raw Data").Select
ActiveSheet.Range("$A$1:$AU$10432").AutoFilter Field:=39, Criteria1:= _
[Code] ......
I searched but didn't find exactly what I needed. I have a workbook with 31 sheets. It is a price guide with each category on a separate worksheet. I figured out how to list the sheets on a separate tab. What my client wants is the ability to:
1. select certain categories for printing, the ToC, Cover and backcover pages have to print in every case
2. the ToC has to change depending on the sheets selected.
I'd rather write some code and give him an an easy command button rather then teaching him how to select non-concurrent sheets and printing only active sheets.
What I'm really stuck on is the updating of the ToC with active sheets only (category and starting page which changes depending on pages selected).
I have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
In this file, I have a Work Summary worksheet in which I'm extracting some data from the other worksheets to "summarize" all jobs into one nice work summary log On Basis of Average of data from 3 other different sheets A,B,C
The following form works great to if onyl formula calling is applied
=AVERAGE(INDIRECT("'"&$C6&"'!c3:c7"))
C6 = Worksheet name or Worksheet tab name ....
I have items in a column like below:
Line (A1) asdfasdf
Line (A2) adsfadsf
Line (A3) asdfasdf
What I would like to be able to do is highlight the three columns and fill down, but I would like for it to increment and paste the next three lines filled like this:
Line (A2) asdfasdf
Line (A3) adsfadsf
Line (A4) asdfasdf
Then below that the next three lines filled like this:
Line (A3) asdfasdf
Line (A4) adsfadsf
Line (A5) asdfasdf
The (A1, A2, etc.) are cell ranges and already contain the concatenate function that pulls data from a different location. The problem I am having is when I
highlight and fill down, it doesn't increment the cell by +1 (Ex. A1 beomes A2) but instead by +3 (A1 becomes A4) the number of lines highlighted.
I require is on combobox selection to bring in the data "type" from collumn ag and put it in collumn "c",i then want to get rest of data from the row but get me started I will try and do the other data,do not know how to do formulas ,started first with userforms and would now like to learn formulas
View 5 Replies View RelatedSheet 1 has a table of prices. There are 7 columns labelled 2 thru 8 and two rows, labelled 1 and 2. Each combo has a separate price.
Sheet 2 has a weight specification (1 or 2 referring to the rows in sheet 1) and a drop down menu with options 2 thru 8.
When I choose a number from the drop down menu, let's say 5, I want to populate another cell with the value from sheet 1 of column 5 on row "whatever the weight spec is", let's say 2.
Is there a formula to calculate the median of a dropdown (Alt+DFF) selection?
E.g.:
a
1
b
2
c
3
a
4
b
5
c
6
a
7
b
8
c
9
If I select a the answer should be 4, c should be 6.
The following is how my sample worksheet looks like:
A
10
Count of A's
12
A
1
Count of B's
13
A
24
[code].....
The two count cells, Count of A's & Count of B's have been calculated with the formulas
=COUNTIF(A$1:A$25,"=A") and =COUNTIF(A$1:A$25,"=B") respectively.
Now, my problem is I want to select the cells with only A's or only B's, along with their corresponding values, but I want to select it with the two count values I found above (12 and 13 respectively), because the data I have to work on is subject to change and each time there may be different numbers of A's and B's.
I'm looking at [URL] which gives a lot of keyboard shortcuts, but not specifically what I'm looking for.
It's a basic function, I'm surprised it's not listed. I just want to copy the value of a selected cell via keyboard shortcut (for copy and paste purposes). I don't want the formula, just the value. If it were just text I would typically do CTRL-C and CTRL-V to paste like everyone does 1000 times a day, but in this case it's copying between two otherwise totally unrelated spreadsheets, so having the formula is irrelevant and produces undesired results. I just need the value of the formula.
Is there a keyboard shortcut for "copy value"?
I am trying to enter the following formula into cells on a worksheet change event but it errors out.
formula to input is: "=IF(H$10="",($H$8/12*K$8),($H$8/12*K$8)+H$10)"
I have used the following format to do this: ....
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I have created a drop-down menu combobox of districts and depending on your choice of districts the list of Health Centers in each district changes. What I want to do is to protect the contents of the cells that contain the health centers. The problem is that when I lock the cells and I choose a district, the Health Center cells cannot change because the cells are locked. Is there anyway around it?
I have attached the sample (Please look at sheet 2. The column that I want to block is the column FOSA)
I am using a VLOOKUP formula, but when I drag it down it doesn't keep the same array selection. Is there a way so that I can drag it and it relates to the cell to the left, but the array selected stays the same. I don't really want to type the same thig out for every cell as there are 6000. I am using: =VLOOKUP(D2,Working!A2:C23,2,FALSE) and want D2 to change accordingly but for working!A2:C23 to stay the same.
View 2 Replies View RelatedI have a spreadsheet in version Excel 2007 that is refreshing data from Access tables. Users are needing charts to show progress by month, but are also needing to filter by area and one to filter by a section.
What I have so far is the data being calculated using SUMIFS so that I can pull between dates. I then added two comboboxes so that the user could filter by an area and by section. This is working, except that I have not been able to figure out how to allow the user to select "All" so that they can see all data from on or both of the selections.
Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedIf a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies View Related