I need to put together a number of worksheets, each worksheet is to record project information that's happening at our production sites and all the tables are uniform in design. There also needs to be one 'master sheet' in which all the information added on the lower sheets is automatically added.
So basically I need to have four tables on separate sheets that feed information in to one table on a further sheet.
My family owns a Fast Casual Middle Eastern/ Mediterranean Restaurant. I'm taking charge of making it as profitable as can be! Our plates are different combinations of kebabs, rice, Falafels, Gyros, salad, platters. So theirs tons of combinations.
I am Dead serious about knowing REAL plate costs:
I spent days entering price data, weighing meat, produce, calculating usable yields. I then built "component builders" using data validation drop-downs, and Index + Match functions to construct the costs of the recipe items,standard base items and side items. So I now know How much a skewer of Marinated Kebab Costs me, and all the Components that go into building a plate.
I've now built a "Plate Builder" (See Pic) to create the EVERY combination available at our restaurant. So when I'm done filling in all the builders, I'll have a whole lot of tables. I'd like to pull the name and plate cost from each table and create a big table organized by whether its eat in or take out. How do I do it.
TL;DR: Need to create a table that pulls data from several other tables....
I have 10 workbooks that each contain a table of data. Each table is consistent in format and headings.
I need to group all 10 tables into one big table. I do not want to merge or combine data just simply have all the data in one master table.
Previously I have used named ranges and arrays to copy them in but this seems cumbersome and thought there must be an easier way to do it.
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I have to create a series of drop down lists with choices on it for people at the company to fill out to see how much time they spent on each type of project. The plan is to have people fill out a "daily form" to see how much work they did that day, and have the results of that feed into a "monthly form" to sum up how much they worked that week. One of the aforementioned drop-down lists have them choose between three categories of work, M, N and B.
I have to make it so that in the monthly form, the results from the daily form segregate themselves into the different M, N and B tables in the monthly sheet. To make it more clear, on the daily sheet, there is just one huge table. For each row, they are to input what type of work they did, how long they worked, etc. On the monthly data table there are three different tables, one for M, one for N, and one for B. I want to have the entries from the daily spreadsheet to feed themselves into one of the three tables in the monthly spreadsheet depending on whether M, N or B was chosen.
I have a table of two columns, but I want them to be two separate but adjacent tables.
View 2 Replies View RelatedI have a workbook that contains mutiple tables in multiple sheets that are all in the same columns in each sheet but contain various rows. Data may not be entered in every single row within each table. I'm trying to create a master list of all data from all of these tables on a single sheet so I can analyze the information in total. I don't want to show any blank rows on the master file where data is not entered in each table. I've tried using the consolidate function within Excel but am not looking to perform a function (i.e Sum, count). I've also tried a pivot table from multiple consolidation ranges (Alt + D + P) but do not like the limited functionality of the pivot table. I do not have much experience with VBA but am assuming this may need to be done using code.
Attached is a sample workbook with named ranges of each table. Example.xlsx
I have an excel workbook with 11 different worksheets. Each worksheet represents a project my company is working on. And in each worksheet there is exactly the same table, just with different data).
Now we would like to get an overview of all these different data put together in one 'summarizing' table on a new worksheet (number 12).
-Is it possible make such a table without having to copy past all the time?
-The data in the tables may change over time, so it would be good if that 'summarizing' table automatically adapts to the other ones.
I have 2 worksheets which have a table on each. I would like to create a list using data from both tables. The list I am looking to create is for an upload fom an excel planning sheet into an ERP system and requires certain data fields and a certain format. Both table have the same amount of fields and the dates across the top. On worksheet one there are material numbers on the left and dates across the top. In the list I require I would need the dates down the left in the first column, next the material number, next the quantity from table one and then the last column I would require the value from the second worksheet which is relevant to the material number and date from the first table. I have tried pivot tables but cannot get this to work and feel it may work with a lookup. I have attached an example of the data.
View 2 Replies View RelatedI'm having an issue where I want to merge lots of tables held in different spreadsheets into one large table so that I can use it in a pivot table. The attached spreadsheet demonstrates what I mean:
So there are 3 different accounts held in the first 3 tabs. These all have the same columns and format. I want to merge these automatically into the table that is in tab 4 so that I can use the pivot table also demonstrated in this tab.
What I want to happen is when I add rows to the tables in the first 3 tabs, these are automatically populated onto the 'overall' table in the 4th tab. (I'm aware I could do this manually, but for what I'm using this for these will be dozens of tables with hundreds of rows updated monthly).
Is this possible? Basically it doesn't matter how it's done, as long as i can show the information held in the pivot table each month end.
I would like to summarize information from multiple tables (across multiple worksheets) into one table using a formula.
I have Attached an example: Book6.xlsx
The 'option plan 1' tab shows multiple summary tables for different types of clothing. (the type of clothing is text in the top left hand side of each table just under the month i.e. "jersey tops"). This tab is an example of 6 similar tabs that come from 6 different workbooks...
For each clothing type (i.e., Jersey Tops) I would like to extract the TTL OPTIONS no. and the TTL UNITS no. for each store and show these on the table in the "front Sheet". against the clothing type.
Is there a formula that can match the Clothing type from column A in Option plan 1 tab with Column C in the the front sheet tab and subsequently Match up the TTl Units and Options for each store on the front sheet tab.
I have manually keyed in what I would like the formula to show for 'jersey tops' on the Front sheet tab.
I have a data dump, on this single excel sheet their are a large number of tables, up to 100 in all, and what i need to do is extract key figures to form a summary table which i then produce stats for.
What i need is a macro or code that will automatically scan the tables, retrieve the key figures and return them in my summary table.
Attached is an example, you will see three small tables labelled Servicing query complex, servicing query simple and total.
I need to extract the blue cell, being the name of the table, the purple cell being the last figure in column c in each table (total number or processes) and the green figure being the the average turnaround. The final figure is i think the hardest to get as its the total number of figures in column c that have either a 0 or a 1 in Colum A. Note that their will be table where neither 0 or 1 will appear.
All figures are dummy figures but the table structure is correct.
I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?
View 4 Replies View RelatedI threw together some sample data, just to test things out. It's very basic, one table of "Customers" and another table with the 50 US State's and their corresponding abbreviations. In the "Customers" table, there is a column of state abbreviations, and in the "States" table there is a column of state abbreviations as well. I have a relationship set up between these two in PowerPivot.
Each "Customer" in the "Customers" table has a unique "User ID". In some states, there are multiple "Customers" (User ID's).
When I try to pull a PowerPivot Table off of these tables, it's showing me all the states as being associated with every user ID. It looks correct if I just pull in the "States" column and the "User ID" column from the "Customers" table...
image1.jpg
But as soon as I drag in the "Full State Name" column from the "States" table, it screws up the PowerPivot Table and shows all the state names being related to the state abbreviations, and all the User ID's as being related to all the states. (This isn't the full image of the table, only part of it, since the full image would be too large).
image2.jpg
I'm used to doing everything with VLOOKUP's, and seldom used PivotTables at all in the past. But it was my understanding that these new PowerPivots would eliminate much of the need for VLOOKUP's.
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
I have a table which is extracted from a database using 2 tables.
1 Header and 1 details table.
I want to display the latest date in column E.
As Column A,B,C is the header table and column D,E is the details table.
Can this be done in vba or a pivot?
I have a table that contains all my data and would like to filter it by company into their own tables that will stay up to date with the main table and then hopefully somehow calculate their investment returns (future stage). I thought Microsoft Query would work but I came across a problem see my other post MS Query returning data to excel some columns I cant sum looks like text
Excel 2010
I have a lot of data to try and summarize but they are in multiple smaller tables. I wish to only extract 2 variables, 'number' and 'total' from all of my smaller tables (lots of them) so the problem looks like this, i have these tables for example where the 'total' title is in a different column depending on which of the smaller tables you are looking at:
cat 1
cat 2
cat 3
total
[Code]....
I am trying to get:
number
Total
123456
30
234567
60
[Code]...
Because the number column is fixed and all of the smaller tables will all have a number in the same column maybe i can insert a column next to the number column and say "find the value where the column title is 'total' - however the location of the column title would change so not sure if this would work? I was also thinking of sorting the columns but that will not work either because of the smaller multiple tables?
I have two tables (Table 1 and Table 2). Table 1 has names of all employees in my organization ('Name' column) and corresponding information in the second column ('Textinfo'). I need to create Table 3 from table 1, but only select those employees who are in my team, ie matching names in the Table 2. I also need to extract corresponding 'Textingo' column information. I tried vlookup but it did not work because if there more that one name in the table 1, vlookup confuses it (i think). Would you know what function or code to use?
Sample file is attached : excel question 1.xlsx
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
What I'm trying to do is link a cell to give me the sum of 2 different cells located in 2 different tables I created.
So I want to have Cell B5 look for the number in cell B3 in the Table that starts in column Q1 and give me the corresponding number in the same row in the column R1
then lookup the number in cell B1 in the Table that starts in column T1 and match it with the number in Column U1 that corresponds to it in the same row
and Finally give me the sum of both corresponding numbers.
IE.. the number in B3 is found in Q13 which uses the number it corresponds to in R13. The takes B1 finds it in T16 and uses the number it corresponds to in U16.
Then returns the sum of R13 and X16 into B5. (B5 should show 176)
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
Let's assume, starting at A1, that i have table (8c x 30r)
and lets assume that in each of the columns i have 5 cells filled in with data at random.
What is the best way for me to produce a list of the data in each of the columns without having to go in and delete out all the blanks myself? I.e. i want to reproduce the table but without any of the cells which do not have any data in.
I have been trying to find a way to consolidate data in two tables, but can't seem to locate a good response. I have been toying with EXACT, VLOOKUP, HLOOKUP, MATCH, and SUMPRODUCT, but none seem to work for my issue.
Two Files - Call them acrendo.xlsx and office.xlsx
Both have a single sheet and contain first name, last name, and date columns. Office also has other information that I'm trying to merge into the corresponding row of acrendo.
Basically, I am trying to take the combined first name, last name, and date column from a row in acrendo as a single record, look for an exact match in office, and if it finds one, return the corresponding values in Coumns D, E, F back to acrendo. Someone suggested using the following sumproduct formula:
=SUMPRODUCT(--(A2=[ofc.ally.xlsx]ofc.ally!$A$2:$A$9329),--(B2=[ofc.ally.xlsx]ofc.ally!$B$2:$B$9329),--(C2=[ofc.ally.xlsx]ofc.ally!$C$2:$C$9329),E:E)
This always returns a value of 0, even if there is data in the matching row to be copied over.
One small complicating matter is that there may be duplicate entries in office (i.e. one row in acrendo may match to four rows in office). I can cleanse that if necessary, or preferably, if multiple matches are found, it would simply insert the additional rows into the acrendo file.
Also, is there a way to go through the acrendo file and check for duplicate records and delete them (e.g. if there is the same last name, first name, and date, delete the duplicates).
Can't do this manually as I have acrendo has almost 18,000 rows and office has almost 10,000 rows.
I am trying to merge data from 2 tables into a master sheet. Column goes like this 1 = customer ID, 2 = allocated number, 3 = age
The first table has around 2000 entries and 2nd table has about 1000, and they both contain some overlapping entries. I wonder if there is a simple way to go around this rather than manually looking at each individual entries as I will be more tables to fit in later on.
I have recently discovered the "data table" tool on Excel and have found it to be extremely useful for sensitivity analysis. The Excel help describes how one can create 1 and 2 variable data tables. Now I would like to create a data table using three variables, however. (I would like to vary three different variables and see what effect they have on one formula.) Is this possible with Excel? Can pivot tables be used this way?
View 2 Replies View RelatedI need to check data from two tables(A and B). They are supposed to match each other and my job is to check if there's error in it. Each row contains several criteria, and all criteria need to be matched. I need to give a report on the info that
1) contains in table A but not in B
2) contains in table B but not in A
3) contains in A and B but some of these criteria do not match..
I have basic knowledge of VBA. Forget to say, they are in different order. And even after sorted, the name may still unmatch with each other, so can not use formular like "=Sheet1!A1=Sheet2!A1"
Example:..........