I;'m trying to create an ARRAy formula to SUM with; the formula has to match 3 different criteria's. I'm trying this with no success, here is the last one I tried.
=sum(ifs(DATA!G:G,Sheet1!A27,DATA!B:B,if(Sheet1!B1,DATA!I:I,">=0")
How could I add ">0" to the below formula array?
{=IFERROR(AVERAGE(IF(Reports!$A$1:$A$4000=A5,Reports!$H$1:$H$4000/86400)),"-")}
Reports!$A$1:$A4000 = column A lists multiple agent's names
A5 = a specific agent's name
Reports!$H$1:$H$4000 = column H contains a number which has been converted from time to a number
86400 = number of seconds in a day (the cell where I am placing the formula converts the number back to a time format)
The average I'm looking for will give me an average of all times which are greater than zero.
Need to expand the crteria on this array?
{=SUM(IF(LYIND1=1,IF(PROFILE!$G$405:$G$435="EOM",(PROFILE!$AU$405:$AU$435),SUM(IF(LYIND1=2,IF(PROFILE!$G$406:$G$436="EOM",(PROFILE!$AU$406:$AU$436)))))))-SUM($K$16:N16)}
I need to add
{=SUM(IF(LYIND2=1,IF(PROFILE!$G$406:$G$436="EOM",(PROFILE!$AU$406:$AU$436),SUM(IF(LYIND2=2,IF(PROFILE!$G$407:$G$437="EOM",(PROFILE!$AU$407:$AU$437)))))))-SUM($K$16:N16)}
I am looking for a formula that averages the numbers in an array if they match the row and column text-based criteria. Based on another thread, I found and edited the following formula. However, it is giving me incorrect numbers.
[=AVERAGE(IF(($A$3:$A$275=$P6)*($B$2:$M$2=Q$4),$B$3:$M$275))]
I have attached a sample workbook that includes the broken formula.
Average Formula Error.xlsx
I need an array formula that can take average based on multiple criteria present row wise and column wise.
Check the attached sheet for detail. I need array formulae in yellow space. I have given one result that I need.
Average.xlsx
I am trying to do a sum of data that contains three requirements - The country has to match either the USA or Canada and then it needs to pull for only a certain month (i.e. Jan, Feb, Mar) and then for that month only pull either Airfare, Hotel, Per Diem, or Car Rental. Basically looking for a way to Sum only the specific category for a specific time frame.
View 9 Replies View RelatedI am creating a summary page to analyse my golf scores. I have come to a dead end when looking at the Par statistics. Does anyone fancy a challenge and try to fill in some of the blanks on the summary tab. I am trying to use array formulas based on multiple criteria. for instance under the Best Par 3 section, it would look at all the Par 3's for whichever golfer is selected and then return the lowest number.
View 4 Replies View RelatedI am trying to run an array formula to match two dates on two seperate sheets as close together based on another cell. Below is what I currently have on some made up values. I am entering it as an array and ideally I would like it to run down the cells changing the reference A2 depending on which cell it is then to then enter this into a macro.
The formula I am currently using is:
=INDEX(Trees!B$2:B$75,MATCH(MIN(INDEX(ABS(IF(A2=Trees!A$2:A$75,(Trees!B$2:B$75-B2))),0)),INDEX(ABS(IF(A2=Trees!A$2:A$75,(Trees!B$2:B$75-B2))),0),0))
Sheet 1 (Named: Main)
Number
Date
Formula
1
15/06/2012
[Code] ....
Sheet 2 (Named: Trees)
Number
Date
1
05/06/2012
[Code] .....
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I've been trying to sum up invoices for specific contract lines while also taking into account if the invoice was deleted. There is a deleted column in which a "Y" is entered into the corresponding row meaning this invoice should no longer be accounted for.
I've been able to sum up the invoices per contract item just fine but I can't seem to get excel to account for the deleted column. I've attached a sample workbook which has dynamic named ranges already defined, the current array formula I'm using to sum up invoices and a pivot table that shows what the correct invoice amounts should be.
I need to transpose into 2x2 range to use as criteria for advanced filter
I tried
arrCrit = Array("Accnt_Nmbr", "313000", "DT", "RV")
Set rngCrit = wsData.Range("IU1:IV2")
rngCrit = WorksheetFunction.Transpose(arrCrit)
Where Accnt_Nmbr and DT are Column Headers in the data to to filtered
However when I run the output includes all DT's (Document Types)
How can I expand so both criteria are used in the filter?
I would like to count the number of values in column B IF the value in Column A is equal to a value from a range of cells.
I would like the formula to be in cell E7. And the range of cells containing the values is in column D.
Here is my workbook Book1.xlsx
I have an array of data that i need to find multiple data points in: ...
View 11 Replies View RelatedI am trying to use an SUM array to count occurances of a given criteria.
Here is an example of one that works for me.
=COUNTIF(A$2:T$1001,V2 & W2 & X2 & Y2)
I want to copy and paste this formula down column Z.
I want to count or add 1, only when a row of 20 cells (A to T) contains all 4 criteria in V W X Y.
Filter below:
Code:
Sheets("Sheet1").Range("$A$3:$AO$64999").AutoFilter Field:=1,
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
Now I would like to change to exclude these values, tried some tricks, like:
Criteria1:=Array("0" _, "1", "2", "3", ""), Operator:=xlFilterValues
but not working.
I want to use Sumproduct function to sum up the values that belong only to Product "PXT" and "PCT". I enter it as array but my formulae doesnt work. can someone give me a hand. Here is my formulae: =SUMPRODUCT((C2:C10="PXT")*(C2:C10="PCT"))*(A2:A10)
ABCD
1ValueQtyProduct
2299.944PXT
3186.53PXT
4711.071PCA
5561.862PCT
6608.961PXT
7520.026PCT
8427.682PCA
9397.341PCA
10387.664PCT
with a multiple criteria index match array!
I have attached an example where I need to bring back a result matching 4 specific criteria, but I cannot seem to get it to work at all!
I have attached an example dataset with the formula that I was trying to get right (and failing miserably!!)
How can I sort an array of data based on the selection from a drop-down menu? And can it be 'secondary' sorted with the result from a second drop-down (ascending or descending is unimportant)?
View 2 Replies View Related[Sheet] .....
I have the above sheet, what i need to do is pull all records to a seperate sheet. The records need to be between the start and end dates and have no full reply. Please help. I am using excel verion 2003.
How do you load an array with values from cells matching a criteria?
I want to look for the number 1 in row 5 and put the Adjacent values in Row 2 in an array.
So here my array should have 1,3,6
Dim CountOne As Integer
CountOne = Application.WorksheetFunction.CountIf(Worksheets("Tool Administration Form").Range("B8:AE8"), "1")
Dim All As Variant
Dim rCell As Range
Dim ArrCnt As Integer
Dim lArrVar As Long
ArrVar = 0
Do
For Each rCell In Worksheets("Tool Administration Form").Range("B8:AE8")
If rCell = 1 Then
ArrCnt = ArrCnt + 1
All = Cells(-3, 0).Value
End If
Next rCell
Loop Until ArrCnt = CountOne
I keep getting errors... I don' tknow how to fill the array properly wiht the values in the cells.
Example:
A B C D E F G
1
2 1 2 3 4 5 6 7
3
4
5 1 2 1 3 3 2 1 4
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
I have used INDEX/MATCH/ROW/SEARCH functions, in different permutations, but I am unable to get the result. The data set is something similar to the below:
Car
Region
Own
Use
Color
Honda
North
Yes
I use it to go for work
Green
[Code] .....
I want to be able to do following (2 separate tasks):
Task 1 (if in A1 on a new sheet, I had Use, i want to list all the items in an adjacent column, skipping the blank rows)):
Use
I use it to go for work
Family trips
Weekend fun
2nd car
Work
Task 2 (if i had Honda (A2) and North (B2), I want to have the colors listed in Column 3):
Car
Region
Color
Honda
North
Green
White
I know this can be done by an auto-filtering or manual sort, but I have work with thousands of similar data on a regular basis, and i want to find a formula that will allow me to list the items based on different criterion.