1. Start Date (Col. C) - assign date to respective position based on first cell that contains value greater than 0 or "". eg. at first cell with 1 in it, looks up to row 4 and assigns date include in that cell in same column.
2. End Date (Col. D) - assigns date based on last cell with value greater than 0 or ""....
How to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
How to get the results in B with a formula?
We have started a new venture from 5th April & I need to create a template for a year and assign week no against the dates. The week1 will start from 5th April & week 52 will end on 31st March.
Also there will be a summary of the Week No(Starting Date & End Date) against each week at the top of the template. I could put the formula for the summary part but I am unable to figure out how to assign week no against the dates as given below. It is very difficult to assign the week no manually for the whole year & also it is vulnerable to error. a formula across B7:B23 which can deliver the desired result?
Sheet2 ABC1Week NoStart DateEnd Date2Week15-Apr8-Apr3Week29-Apr15-Apr4Week316-Apr22-Apr5 6DateDesired
Result 75-AprWeek1 86-AprWeek1 97-AprWeek1 108-AprWeek1 119-AprWeek2 1210-AprWeek2 1311-AprWeek2 1412-
AprWeek2 1513-AprWeek2 1614-AprWeek2 1715-AprWeek2 1816-AprWeek3 1917-AprWeek3 2018-AprWeek3 2119-
[Code] .........
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
I am trying to get spreadsheet cells to change colour relating to arrival and departure dates. I also need the cells to be assigned value so I can use them to calculate cost based on number of nights, eg arrive Sept 10 dept Sept 15 = 5 nights. I can then use this 5 to multiply out costs.
I have attached an example of what I am trying to achieve.
I have searched the forum and saw similar questions but I couldnt apply them.
I have dates in Column D (mm/dd/yyyy). I'm trying to write a macro to compare the date in any cell in Column D to the current date. Then, if the date in that cell is within a month of the current date, color it red. If the date is within two months, color it orange. Etc, for up to six months. I've read up a little on dates in VBA, but I'm pretty lost.
View 4 Replies View RelatedI have a sheet where i need to highlight cells C3:C140 based on approaching dates. The cells C3:C140 contain dates generated from another file and would be random approaching dates.
The conditions are
1) Approaching Weekends (Sat and Sun) = always turn red
2) 3 days after today = orange
3) 2 days after today = dark orange
4) Other days = light orange
I want to create a monthly timesheet which contains 9 columns for
(Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
I have a list of names and prices as shown in two columns as a master list:
Apple and Lime 3,5
Assam 2,5
Chamomile Flowers 2,5
Chamomile Lemongrass3,5
Chilli mint 3,5
(the list is a lot longer than this!)
I have created a pick list using data validation to pick any of the names to insert elsewhere in the spread sheet. How can i get the next cell adjacent to this name to search and input the corresponding price?
Essentially I have column A that has a result that is a sum of time, I'm looking to assign a value based upon # of minutes in violation.
So basically I want less than 0:15:00 to equal 1
0:15:00 to 0:59:59 to equal 2
1:00:00 to 2:59:59 to equal 3
and greater than 3:00:00 to equal 4.
My data looks like this:
0:00:24
0:00:56
0:45:33
0:18:36
0:36:43
0:25:15
0:17:14
0:29:21
0:49:34
0:05:28
0:04:19
0:09:08
0:29:06
0:05:39
0:02:53
1:16:18
0:14:06
0:08:01
1:01:46
I have a routine that looks a variable's first letter and then assigns it to a specific folder. I have tried using just the first letter (firstletter) and the ASCII value of the first letter but neither seem to work - see below.
firstletter = Left(rng.Value, 1)
iletter = Asc(firstletter)
MsgBox iletter
If iletter < 71 Then cmfolder = "CM A-F" Else
If iletter > 70 And iletter < 77 Then cmfolder = "CM G - L" Else
If iletter > 76 And iletter < 83 Then cmfolder = "CM M - R" Else cmfolder = "CM S - Z"
MsgBox cmfolder
I need to write an excel function/macro/code to assign yes or no to a cell if the Description fits a certain category. I have attached a sample workbook and will explain what I mean.
In the sample workbook, there is data on a company. This included a unique ID, city, state, and description. What I want to do is fill out the yes/no column. So if a particular company has 2 of the 4 necessary "Descriptions", then column G will return yes, otherwise No. It must return yes for a particular company/ID if 2 of the "Descriptions" are "Sale", "Service", "Business", or "Par". I only want it to count at least two unique descriptions.
For example, in the sample workbook, Company A has all 4 of the necessary descriptions, thus everything in column G for this specific client should be yes. For Company B, only 1 of the 4 descriptions matches, so it returns No for all Company 2 columns. Company C has 2 of 4, so it returns yes for these columns. Note, it doesn't matter for Company C that "Business" was listed twice. It only needs to count the first unique time that description occurs.
In my workbook sheet 11 has some ranges that need to have names based on cell values in sheet2 (for purposes of data validation lists).
Range S28:S46 will assume the name of sheet2A11 & sheet2A3.
(example name period_1unit_1)
Range U28:U46 will assume the name of sheet2A11 & sheet2A4.
Range W28:W46 will assume the name of sheet2A11 & sheet2A5
Right now I am calling the code when something is entered into A11.
I have tried if statement and select case, but I ran into complications with both.
I have posted both codes with the questions I have concerning those codes.
I have an excel spreadsheet that 7 different categories (eg. Ave waittime, Avg loadtime, etc) that I have conditionally formatted based on 5 ratings (each rating a different color Green, light green, yellow, red, and purple) I would like to be able to give each cell a value based on what color it is eg. Green=5, light green=4 and so on.
View 2 Replies View RelatedI have a "memo of meeting" excel document used to capture notes during client meetings. In this document there's a cell for "purpose", "agenda", and "notes". The 'consultation type' cell is a drop-down populated by values set in Sheet2. The 'agenda' & 'notes" cells are then populated with information (also stored in Sheet2) based on what drop-down option was chosen in the 'purpose' cell. I'm currently making this happen with basic =IF() statements; however, the problem is that by doing it this way, the =IF() statement must reside in the actual cell which will end up showing the data.
This is undesirable as there may be additional notes, agenda items, etc. that I'll need to add during the meeting and as it's currently setup, I can only have either the pre-populated info OR the ad-hoc notes - not both. It seems a simple fix. Maybe put the =IF() statement in a cell off to the side but have it "assign" the value to 'agenda'/'notes' but that doesn't seem to work.
I have three variables; Independent variables x & y, and dependent variable z. x & y can take the values 1,2,3 and can equal each other z can also take on values 1,2,3 but can never equal x or y. I tried using if/and statements to solve this (see below), but I would have to do it for each case and it exceeds Excels embedded function limit.
=If(and(B7=1,B10=1),riskduniform(E4:E5),if(and(B7=1,B10=2),3,if(and(B7=1,B10=3),2,if(and(B7=2,B10=2),riskduniform(1,3),if(and(B7=2,B10=1),3,if(and(B7=2,B10=1),3,if(and(B7=3,B10=3),riskduniform(1,2),if(and(B7=3,B10=1),2,if(and(B7=3,B10=2),1)))))))))
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I do have a data set from A1:C8 as follows:-
Brand Name(A1)Sales Value(B1)Margin(C1)Levi's100002000Arrow150002500Allen Solly120001300Hanes80001000John Miller250004500Disney280003200Ray Ban180002100
The above brands are categorized as follows:-
Brand NameProposed CategoryLevi'sConsignmentArrowBrandAllen SollyBrandHanesBrandJohn MillerPrivate LabelDisneyBrandRay BanConcessionaire
I would like to put formula from D1:D8 in such a way so that the Proposed categories are extracted automatically through formulae. This will help in getting the contribution calculated from different categories.
Brand Name(A1)Sales Value(B1)Margin(C1)Category(Desired Result)(D1)Levi's100002000ConsignmentArrow150002500BrandAllen Solly120001300BrandHanes80001000BrandJohn Miller250004500Private LabelDisney280003200BrandRay Ban180002100Concessionaire
I have two tables below. First table contains the list of domain names (given just for example, actual list may contain several more such Domain names) with the group names assigned to them. Second table shows the criteria for assigning them the group names:
Sheet2ABCDEFG1Table 1Table 22Domain NameGroup NameDomain NameGroup NameDomain NameGroup Name3NCG-W3K-SAT14-0DOSSNCG-W3K-EEC-SUN16-3EECEXCEEC4SVL-WIN-SAT08-0LABSNCG-W3K-SUN16-0DOSSDCDC5SVL-WIN-SAT06-0LABSNCG-W3K-TUE01-0DOSSNCGDOSS6NCG-W3K-MON04-0DOSSNCG-WIN-EXC-SUN21-0EECDMZETIS7NCG-W3K-EXC-MON04-3EECNCG-WIN-EXC-SAT16-0EECSVLLABS8NCG-W3K-EXC-MON03-0EECNCG-W3K-X64-DC-SAT14-0DC9NCG-W3K-EXC-TUE01-0EECDMZ-NCG-W3K-X64-SUN12-0ETIS10NCG-W3K-EXC-SUN15-0EECDMZ-NCG-W2K-SUN12-0ETIS11NCG-W3K-X64-EXC-SUN16-0EECNCG-W2K-SUN20-0DOSS12DMZ-NCG-W3K-SUN11-0ETISNCG-W3K-MON03-3DOSS13NCG-W2K-DC-SUN11-3DCSVL-DMZ-WIN-SUN12-3LABS14NCG-W3K-X64-DC-SUN10-3DCSVL-DMZ-WIN-SAT10-0LABS15SVL-DMZ-W2K-SUN12-3LABSDMZ-NCG-W3K-SUN12-0ETIS16NCG-W3K-EXC2-MON03-3EECDMZ-NCG-W3K-SUN10-0ETIS17NCG-W2K-SAT17-0DOSSNCG-W8K-X64-DC-SUN10-4DC18NCG-W3K-X64-SUN10-0DOSSNCG-W3K-TUE01-3DOSS19NCG-W3K-TUE00-0DOSSNCG-W3K-DC-TUE02-0DC20NCG-W3K-X64-SAT15-0DOSSSVL-WIN-SAT11-0LABS21NCG-W3K-WED00-0DOSSSVL-WIN-SAT07-0LABS22NCG-W8K-X64-SUN19-0DOSSNCG-W2K-SUN17-0DOSS23NCG-W3K-EXC-SUN20-0EECNCG-W3K-SUN20-0DOSS24NCG-W3K-ULZ-SUN14-0DOSSNCG-W3K-TUE22-0DOSS25NCG-W3K-TUE03-0DOSSSVL-WIN-SAT07-3LABS26NCG-W3K-ULZ-TUE00-0DOSSNCG-W3K-MON05-3DOSS27NCG-W3K-SUN19-0DOSSNCG-W8K-SUN18-3DOSS28NCG-W3K-EEC-SUN19-0EECNCG-W8K-SUN22-0DOSS29NCG-W3K-EEC-SUN20-3EECNCG-W8K-X64-DC-SUN11-0DC30NCG-W3K-EEC-THU00-0EECNCG-W3K-SUN17-0DOSSExcel 2007
My concern is to automate this process using a VBA code. How can I search for the keyword given in Table 2 in the first column of Table 1 and assign the group names as it is assigned currently, considering the below conditions and criteria.
1) The correct group name should be assigned to the Domain name containing the keyword given as per criteria in Table 2
2) It is possible that the domain name will include more than one keywords given in Table 2. For example Cell number A7 contains both keywords NCG and EXC, in such cases the preferance should be given to EXC and we will assign the group name as EEC. And in Cell number A12 also contains both NCG and DMZ, again the preferance should be given to DMZ and we have to assign group name as ETIS.
That means we will give second preference to keyword NCG. If domain name contains none of the keywords except NCG as per given criteria then only we will assign grup name DOSS.
Is it possible to assign a name to a range of cells, so that when you insert a formula into another cell you can call that range of cells into the formula?
View 5 Replies View RelatedI have a 58,000+ line spreadsheet.. I have blank cells, that need to have a value.
The formula I want to write is...
If the cell before the blank cell has a value, carry that value over to the blank cell as well.
so if A1= 2 and A2=(blank), then A2=2 as well.
I also have instances where A2 and A3 are blank and need to be the same values (ie. 2).
I have a very large Excel spreadsheet that is generated through an Oracle application at least once a month at work. I would like some code (either a worksheet function or a VBA) to check and report the following. If the frequency in column C is "Monthly" or "Weekly" just go to the next row. If the frequency in column C is "Annual", add 183 days to the date in column B; if it is "Semi-Annual", add 92 days to date in column B; if it is "Quarterly" , add 46 days to the date in column B; if the frequency in column C is "2-Year", add 365 days to the date in column B. Once the check has been made; I need the new total or date that was calculated checked against the date the report is being run (system clock date). If the date or total days is less than today, a new worksheet, titled "Late" needs to contain that row of data. If the date or total days is greater than today's date, just go on to the next row. I've attached an example worksheet.
View 9 Replies View RelatedIf I have 5 names like apple, boy, cat, dog, energy
and if i enter a in a cell it should output apple in the same cell.
example: (=IF(A1="a",A1=apple,0))
How to do this?
I have a VBA form that I would like to assign to a cell, but it's a merged cell. When I do this, the form does not run. If I assign it to a single cell, it runs fine. Is there a trick to tell the macro that the target address is a merged cell?
View 2 Replies View RelatedI have a table with 2 columns A & B and desired outcome in column C (see attached sample).
I need to assign the same value to cells (in column A) located within the same group (in column A) using the following rules:
If any cell value within the same group = W220 or W210 or E240 or E250, then assign value "Group A"
If any cell value within the same group = P210 or C100, then assign value "Group B"
If any cell value within the same group = N230 or N250, then assign value "Group C"
I use my spreadsheet to keep score during tournaments. when i calculate my leaderboard at the end of the event i list the results first place all the way down until it finishes the list of players. i need to be able find players with the same or equal score and list them as tied for the same place.
another words if i get to the 3rd place and i had 3 players tie for third i need my leaderboard to show them all in 3rd place . currently it would number then 345. i listed below how it should format it. i also attached a file it will make it more clear.
I have been given a spreadsheet with the sales data for each of our salesmen. Each job has its state listed and what I need to do is break down the information by region. The catch is that the regions are not given - just the states. So I need to assign the states to their corresponding regions. To do this, I tried writing an "IF" statement like this:
=IF((B2="AL"),"SOUTHEAST",IF((B2="CA"),"WEST",IF((B2="NJ"),"NORTHEAST",IF((B2="TX"),"SOUTH CENTRAL", ... and so on.
So I was doing this for all 50 states. The problem is that the statement got too long. So how do I write this? There has to be a shorter/easier way.
Need to write a formula that would assign a letter grade (in row W) to the average in row V, based on the school's scale. So, row V contains my averages (in % form) and I want row W to have the letter equivalents.
93+=A
85-92=B
75-84=C
67-74=D
<66=F
I have had some help with this (thanks!) but am stuck.
Can someone add to the code below and make it so that multiple tasks, with multiple assignees, can be created from a range of cells, such as:
Column A Column B
Row 1Task SubjectAssign to
Row 2GV LP for AZJohn Brown
Row 3GV LP for COJohn Brown
Row 4GV LP for ILSuzy Smith
Row 5GV LP for INSuzy Smith
Row 6GV LP for KYSuzy Smith
Row 7GV LP for MNSuzy Smith
Row 8GV LP for MSBob Barker
Row 9GV LP for NCBob Barker
Row 10GV LP for NJBob Barker
Row 11GV LP for NMBob Barker
Row 12GV LP for NVBob Barker
Row 13GV LP for NYBob Barker
Row 14GV LP for OHBob Barker
Row 15GV LP for SCBob Barker
Row 16GV LP for WVBob Barker
(Sorry, it didn't translate well. The "GV LP for AZ" is cell A2, "John Brown" is cell B2.)
Here is the code I have so far:
