I want to autosort by date (column I - dd mmmm yyyy hh:mm AM/PM format) in a worksheet which contains data in columns A:I of 15000 rows.
I want to know how to do it.
When i update/enters a data in a new row or present row, It has to be go according to date automatically(ascending)
I had already googled it and tried all avialable codes with all modifications.
If someone help me would be greatful to me.
I was new to EXCEL with some basics.
I have a column of data that constantly changes in length and want this column to autosort the data alphabetically when the data changes. the list contains the names of worksheets
I then want to display in the next couple of columns data from the worksheets listed in the column. i know i can do this manualy by saying that that the cell equals sheet? cell etc but was wondering instead on putting in a formula of ='A sheet'!E20 i can put something where A Sheet is that uses the name in the column of data ?
i have a pivot table where i define a custom calculation on.
My issues is after the calcs are complete (pivot refreshed) i want to sort by my values ratehr than the ascending alpha order for my Rows fields.
Is there a work around so that i may keep my calcd fields?
I have an excel report that is generated in another program every week. The report is not sorted by date and it may have 100 rows of data one week and 200 rows of data another week. My excel file has formulas that refer to this original report. I need those formulas to update first, then I need the information to automatically sort by date (column D in my excel file). I have tried to setup a script to run, but it's not working. I will attach the file and the script.
Attached File: Sample w VBA.xls‎
A sheet containing all the daily tasks, and according to the tasks that I need my employees to work on a particular day I write YES in the column. The cells that have YES marked next to them are then reflected in a new sheet with the following formula:
=IF('PLANNING CELLS (P)'!C12="Yes",'JOBS LIST CELLS'!C12,"")
Obviously the formula is different for every cell.
The issue with this is that if i have a list of 50 items and i select only 10 (Marked yes) I have a lot of blank spaces in the new list. I need to remove these blank spaces from all columns automatically whenever updating. Is it possible?
I need to find a way to autosort a series of numbers, inputted manually for example, in cells A1 through A15. The autosort function needs to put the numbers in descending or ascending (either way, doesn't matter) in cells B1 through B15.
In effect, if the numbers inputted into the first cells change daily, then the correct order of these be automatically sorted so that they are in a specific order.
The closest I can come WORKS, but I'm using about 300 filter formulas to do so.
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I've got a spreadsheet with 2 worksheets in it.
On the first one we've got:
Name of the agent | petition REf num | Task
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO
John Doe | | RIL
John Doe | XERT-WWWW | RMT
Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK
Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
I don't know where to start
Dropbox - Final.xlsm
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
I am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,
How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".
Each month I get a report that is formatted by the customers and this sheet never changes. The problem is that the master sheet my job uses is not formatted this way. The master workbook has several sheets that breaks down the data from the monthly sheet. Instead of having to enter the data manually I'm looking for a way to export the data from the monthly sheets into the master workbook. As I stated the sheets are all the same but come from different providers and all contain the same amount/style of data.
View 1 Replies View RelatedI have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I have two sheets in one workbook; one has a list of names in column A (136 of them) and another is a master list with all the names of people who work for the company (over 2000). Sheet 1 and Sheet 2 respectively. I need to populate columns B-E in Sheet 1 with the data in columns B-E in Sheet 2, but only for the names that match in column A. I've tried applying filters but can't get to the data I need for some reason. The names are formatted the same way in both sheets (Last, First). In Sheet 2 the names are links but in Sheet 1 they aren't; not sure if that's important.
View 7 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
transferring data from a worksheet (Passdown Report) to another worksheet (Data Base) located in the same workbook. In the source worksheet (Passdown Report) there are 2 cells (B2 and D2) in which I would like the data to be transferred along with the data from B4 to AQ33. All the cells contain a formula which I want to stay after the information is transferred to the target worksheet (Data Base). This will be a daily transfer to the target worksheet (Data Base), so the macros should also identify the next available open row to transfer the data to.
View 1 Replies View RelatedHere is the situation:
On Sheet1:
A
123
456
789
On Sheet2:
D, G
aaa123, 11
bbb456, 22
ccc789, 33
I would like the function to search strings within an array on Sheet2 for a value on Sheet1 (that is, to search for 123 within the strings aaa123, bbb456, ccc789,etc.). Once a match is found, I would like the function to return another value from the same row on Sheet2 that contains the value from Sheet1 (within the string).
Can you help me?
I must use cell references for the values on Sheet1 because I am working with thousands of unique supplier numbers. In addition, all cell formats are general. I prefer to use the INDEX(MATCH combination rather than the VLOOKUP option.
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
View 9 Replies View RelatedI have a two identical worksheets in the same workbook with two tabs (Search, Database). The Search worksheet contains a search engine at the top which searches by column, and pulls rows from the Database tab, which match the search queries. However, the rows that are pulled up in the Search tab cannot be edited as they are all MATCH formulas. Only the rows in the Database worksheet can be edited.
This can be quite problematic if I am searching a row to edit it. Although the search engine is convenient enough and faster than filtering (as I have over 20 columns), when the row comes up, I cannot edit it. I have to go to the Database sheet and filter through until I find that row, and THEN edit it. What I require is that when I search for something and the matching rows get pulled up, I want to be able to click a button which will take me to those rows in the Database sheet.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
I have an excel 2007 work book with multiple worksheets that updates daily. I want to bring all the data from each of the work sheets into a new worksheet so that i can create a pivot table.
All the data in the worksheets have the same headings and correspond to the days of the year.
I think i need to use some sort of range look up?
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol()
Dim Sht1 As Worksheet
Dim Sht2 As Worksheet
Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
2) automate it by using worksheet change?
I use a web query to import into an excel workbook. As data is changed on the web that the query runs against, I would like the name of the sheet that is being imported into to change to one of the cells that is being imported.
View 9 Replies View RelatedAs I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
I am having a problem pulling out individual data from previous worksheet (Sheet 1) to another worksheet(sheet 2, 3, 4...) individually.
For example I want to pull out the values of IP B0b/C0b Hum to another worksheet separated by each day. is there an easy way to to this using a vba code or excel formulas?
Please find attached file.
I have below code, but does not work correctly. The problem is when it's run in main worksheet, it doesnt match the correct workbook in every worksheet and it only generates the data in first workbook for all worksheets. It seems that it lacks something link between workbook in main worksheet and workbook in others.
Sub HzWb()
Dim bt As Range, r As Long, c As Long
r = 1
c = 8
[Code]....
I'm having trouble with a copy of data in one worksheet and a paste of the data into another worksheet. The problem is determining the last row of data and where to start the paste.
What I have is three worksheets. Worksheet 1 contains column headings in row one. Worksheet 2 contains 30 columns and a varing number of rows of data. Worksheet 3 contains 30 columns and a varing number of rows of data.
I want to end up with all the rows of column a in worksheet 2 copied and pasted to column a of worksheet 1. Then I want to copy all the rows of column a from worksheet 3 and paste the rows to worksheet 1, but starting where the data from worksheet 2 ends.
sample data
sheet 1 sheet 2 sheet 3
01/01/08 01/02/08
01/03/08 01/04/08
Results
sheet 1 sheet 2 sheet 3
01/01/08 01/01/08 01/02/08
01/03/08 01/03/08 01/04/08
01/02/08
01/04/08...............................
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
View 1 Replies View Related