I would like to combine the data (in table format) on 900 different worksheets in one workbook (file) below each other, on one worksheet.
The data are in colombs B,C,D,E & F on all of the 900 different worksheets. The number of rows differs on each of the 900 different worksheets.
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
I have about 100 worksheets that I need to combine the data from column A into 1 worksheet and place the name of the worksheet the data is coming from in column B of the combined worksheet. example
worksheet 1 named New York contains the following in column A
11518
11563
11572
Worksheet 2 named California contains the following in column A
93510
90247..............
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
View 2 Replies View RelatedI am trying to copy raw data from two worksheets (Sheet2 = "550 Report (raw data)" & Sheet3 = "305 Report (raw data)"), that I cannot edit, over to a new worksheet (Sheet1 = "Exception Management") that I can edit. I have been successful in coding Sheet2 to come over correct, but am having problems with Sheet3 because of a few issues:
1st: Column A on both sheets contain a unique alpha-numeric identifier that can be used to identify records that can be combined. Sheet3 will sometimes contain multiple records for a single Sheet2 record.
2nd: Matching rows from Sheet3 will always be done based on Sheet2 column A (So I need to search through Sheet3 column A based on all values in Sheet2 column A).
3rd: The dataset is MUCH larger than my example files. Sheet2 normally contains 700+ rows of unique identifiers with 56 columns of data. Sheet3 is pretty much as-is, except ususally 1/10th the number of rows as Sheet2.
Here is the code I am experimenting with:
Private Sub CommandButton1_Click()
Sheets("Exception Management").Select
' Prepare Exception Management sheet for new data
Cells.Select .......
I have data in multiple worksheets and I want it all combined in 1 excel sheet. The 1st worksheet is named as A and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. 2nd worksheet is named as B and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. and there are some more worksheets like that. The start point of data will always be same but can end till any row. Can I get a code for collating all together in one sheet,
View 9 Replies View RelatedI have 5 worksheets (all formatted the same) with data inputs from row 19 to 119 and columns A to BA. After row 119 I have several sums based on the data that is being entered on rows 19 to 119, I don't want this data being copied over. In most cases all rows from 19 to 119 will not be used, so I would only like to copy the rows that have data. To complicate matters, there are times when there will be blank rows within rows that have data. For example rows 19 to 25 will have data and 26 will be blank but rows 27 to 38 will have data. The blank rows are identified by column A (Job Number) being blank. This occurs because a job is dropped from the schedule and is no longer necessary.
In the end, I would like to have a button using VBA that will first clear the data in the new sheet (the sheet that is being populated with the information) and then re-populate it with updated data from the 5 worksheets.
I have 2 sheets in the same workbook (sheet 1 & 2) with one matching column (A) of info and need them to combine and fill the missing data. Each sheet has identical column heading and the amount of data is not the same; sheet 1 has ~2000 rows and the other ~5000. Sheet 1 is consolidated so I would like to fill in the missing cells from sheet 2.
Ex. Sheet 1.......
Ex. Sheet 2.....
As you can see, the missing cells in sheet 1 could be filled from the data in sheet 2; also note that the above info is on different rows (and will be random for each case). I only want the columns to fill in that have a matching email, the other 3000 rows in sheet 2 do not match with sheet 1 and I don't want the rest of it to transfer over.
I am trying to combine data from two separate worksheets onto one so it can be sorted for printing. Using the macro recorder, and the search function on the forum, I managed to ham-fist my way through most of it - except for one issue.
How can I have Excel/VBA go to the first open cell in column A before it pastes the 2nd batch of information? I get an "object required" error with the MyRange variable.
Code:
Sub UpdateSortedTab()
Dim MyRange As Variant
' Removes Old Information
Sheets("Sorted").Select
Columns("A:E").Select
Selection.Delete Shift:=xlToLeft
' Copies Bench Stock Information
[Code] ........
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
I'm having trouble with a copy of data in one worksheet and a paste of the data into another worksheet. The problem is determining the last row of data and where to start the paste.
What I have is three worksheets. Worksheet 1 contains column headings in row one. Worksheet 2 contains 30 columns and a varing number of rows of data. Worksheet 3 contains 30 columns and a varing number of rows of data.
I want to end up with all the rows of column a in worksheet 2 copied and pasted to column a of worksheet 1. Then I want to copy all the rows of column a from worksheet 3 and paste the rows to worksheet 1, but starting where the data from worksheet 2 ends.
sample data
sheet 1 sheet 2 sheet 3
01/01/08 01/02/08
01/03/08 01/04/08
Results
sheet 1 sheet 2 sheet 3
01/01/08 01/01/08 01/02/08
01/03/08 01/03/08 01/04/08
01/02/08
01/04/08...............................
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies View RelatedHow to list all data from different worksheets into one worksheet without manually copying and pasting it in a new worksheet?
For Example: I have 20 worksheets. In those worksheets are list of items that I bought from the different stores. I want to make a list of all items that I bought in one worksheet.
I have two worksheets with a column of part numbers. I am trying to combine them in a new worksheet and remove duplicates.
View 7 Replies View RelatedI need to transfer a lot of data from many worksheets into one worksheet. The columns are all uniform, but the rows are not. I’d like some VBA code that would look at worksheet A(1) and copy the first entire row where column A is not blank and paste it to the first blank row in another worksheet titled “A(Combined)”. The code would then copy the second blank row in A(1) and paste it into the next blank row of “A(Combined)”. The code would continue until all rows with data in column A are transferred to “A(Combined)” and then proceed to worksheet A(2), etc. and do the same. See the attached workbook
View 3 Replies View Relatedhow to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
View 5 Replies View RelatedI am in need of an Excel Macro to help me create an address list by market. For simplicity sake I’ll set up a mini-example: I have an Excel document with a MASTER tab that lists the Market (Column A), a person’s name (Column B) and their Phone number (Column C). What I need to macro to do is read column A and make a new tab for each market in that column, then populate the name and phone fields accordingly.
A found one macro that was close, but it does not automatically make a new tab (I have to do that manually) and it does not refresh the sheet each time I open it, so when I run the macro again I get duplicate entries.
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code:
For Each ws In ThisWorkbook.Worksheets
If ws.Name Like "Pg*" Then
Set CopyRng = ws.Range("A2:G68")
[Code]....
I want to transfer the data of one worksheet (to be added everyday) to multiple sheets.
View 4 Replies View RelatedI have a a client who sends me an excel workbook quarterly. There are 90 worksheets and each has 20 language columns which are suppose to be the same on each worksheet.
My Problem is I want to merge them into one worksheet so i can add them to a database, but the client keeps changing the order of the languages!
So as an example I need to be able to identify the Polish, Russian and English columns on every worksheet and then combine each language to a new column on a new worksheet.
I have an excel workbook with 11 different worksheets. Each worksheet represents a project my company is working on. And in each worksheet there is exactly the same table, just with different data).
Now we would like to get an overview of all these different data put together in one 'summarizing' table on a new worksheet (number 12).
-Is it possible make such a table without having to copy past all the time?
-The data in the tables may change over time, so it would be good if that 'summarizing' table automatically adapts to the other ones.
I saw the below code in another thread that does almost what I need it to do. The only thing is that I need to only select certain worksheets, not all. Is there an adjustment I can make to this code or is there something I can do differently?
Each worksheet has a table on it as well, is there a code I could use to just combine certain tables?
Sub debit1()
'Combine all worksheets to the Summary sheet
'Created by Trevor G 30 June 2011
Dim ws As Worksheet
[Code]......
i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.
i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...