Conditional Format Macro Code
Nov 14, 2006
I'm try to get a macro to do a 5 Colour Conditional format. I've searched the previous questions as recommended, and found code that I think will do the job. I've tried to modify it to my own specs, but I can't get it to do want I want. Basically I need it to colour code the cells based on the ball number within them. As I can't get the code to work, I don't know if the colour values are correct? Also given that cells are white by default, balls 1 - 9 don't need to be part of the code do they? I've attached a small example of what I've managed so far, with the macro code enbedded. Also what's the correct way of cpoying & pasting macro code from one spreadshhet to another? The simple copy and paste seems to stop the code working correctly. Any help would be greatfully received.
View 7 Replies
ADVERTISEMENT
Mar 23, 2009
I want to send the value of selected item in texbox , the value format is change by combobox value ..and I want the value is fill on the next column of sheet ( see attached file please)
View 2 Replies
View Related
Nov 26, 2007
I m creating a sheet in excel where I need to do some conditional formatting but need more than 3 rules so i'm guessing i'll need to use some vb code.
Basically I have a range of cells say from c12 to ag15
These cells all have formulas in linking to other cells in other sheets.
Tha values that will be in them are as follows: s, h, hd,ooo,z and maybe 1 or 2 more will be added later. I need the cells background and text colour both to change to a colour depending on the value in the cell.
eg. cell value = s then background and text colour both to be yellow.
View 12 Replies
View Related
Feb 17, 2008
I found code that I would like to use conditional formatting code as shown here. Here is the code just in case:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20
how can I get this code to work across the entire workbook and not just for the specific worksheet? I tried pasting the code into the This Workbook under VBA Project and changing the Private to Public but no go.
View 7 Replies
View Related
Sep 3, 2004
I've created a Gantt chart using the tip #58. Now how can I count all the cells that are colored?
View 9 Replies
View Related
Oct 11, 2006
I am trying to call the routine posted on this site as:- Excel Conditional Formatting: Get Around Excel's 3 Criteria Limit in Conditional Formatting
whenever a cell with a data validation list is changed. The list is of countries and the cell value is the lookup value for a VLOOKUP. Based on the VLOOKUP result I needed 7 formats, so tried to use the code above. The code works OK only if you change the result cell manually. Can the routine be made to run on the list selection?
View 4 Replies
View Related
Nov 21, 2007
=IF(($C$3=20),- SUM((C28:C47),IF(($C$3=18),-SUM(C28:C45,IF(($C$3=22),-SUM(C28:C49),"")))))
When C3 = 20 the sum formula is correctly returned. When C3 = 18 or 22 "FALSE" is returned.
View 2 Replies
View Related
Jul 6, 2009
I have a spreadsheet whereby in each cell of a row there may be a formula or/& conditional statement applicable. I would like to create a macro that can perform the insert of the new row as well copy down from cell above applicable functions as well as conditional formats that maybe resident. Can this be done?
View 8 Replies
View Related
Dec 18, 2013
When I hit the macro code you see below I get both columns D and E, starting from row 18, to get 'filled down' to the specified spot. Every second row has a conditional format (when a value is entered in column A) to change the row to the color grey, and every row between it has a conditional format (when any value is entered in column A as well) to have the row changed to the color red. The issue here is that the Macro code messes up the conditional formatting and uses the conditional formatting of those two cells, which are being dragged down, for those entire filled-down columns! This is what I am starting off with test1.xlsm and this is what I end up with using the macro code below (or doing it manually)
test2.xlsm
Is there a way for the Macro code to bypass this issue?
View 6 Replies
View Related
May 1, 2008
I have 2 workbooks that I am working out of. Workbook number 1 is where the data is going to be saved from workbook number 2. I need to copy data from workbook number 2 but there are several road blocks. 1) I need to search for specific information in column E. Anytime information is listed under this colomun it is listed 2 times one on top of the other with a different peice of information to the right of each one. note that the items that I am looking for on this sheet will no always be there.
What to copy under E / F
E F
1 BAR | $5,123
2 BAR | 24
Once the first "Bar" has been found, F1 & F2 need to be copied to workbook 1 to different locations on the active sheet. The names will always be listed together and the data will always be to the right.
View 2 Replies
View Related
May 4, 2007
im making this macro code for my cell that will have a conditional formula but im always getting an error pop up message: TYPE MISMATCH.
here is my code
Sub ACCOUNTFINDERCODE()
Dim LastRow5 As Long
LastRow5 = Columns(7).Find("*", searchdirection:=xlPrevious).Row
If Sheets("working file").Range("g11:g" & LastRow5) = "F1212014000" Then
Sheets("working file").Range("k11:k" & LastRow5) = "='Account LookupSheet'!R4C3"
End If
If Sheets("working file").Range("g11:g" & LastRow5) = "F1212015000" Then
Sheets("working file").Range("k11:k" & LastRow5) = "='Account LookupSheet'!R5C3"
End If
View 9 Replies
View Related
Jun 12, 2008
I am working with a large report that needs to be broken out and sent as separate files to recipients for confidentiality purposes. I'd rather not use views/protection since there are many different ways particular people need to see the data, plus it is a very large file and flattening it works to everyone's advantage. My goal is a macro that will copy each tab into separate workbooks, paste special values, and save as each as Cell A1 (or the tab name-same thing). I have tried recording macros and editing (I'm very new to VBA) many times but it's a mess.
View 2 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Feb 9, 2010
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
View 2 Replies
View Related
Apr 12, 2012
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
View Related
Mar 20, 2013
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
View 3 Replies
View Related
Feb 9, 2009
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies
View Related
Jun 13, 2006
I would like to format my cells containg date from any format to the format dd-mm-yy. I was doing this manually with the below function
=TEXT(YEAR(Q2),0)&"-"&(RIGHT("0"&TEXT(MONTH(Q2),0),2))&"-"&(RIGHT("0"&TEXT(DAY(Q2),0),2)).
I would like to automate this using vba. i tried a bit but doesn't get what i want. ultimately i want the date in text(dd-mm-yy) format.
View 5 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Apr 22, 2014
how to view changes on my spreadsheet.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
View 2 Replies
View Related
Dec 16, 2008
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
View 4 Replies
View Related
Apr 24, 2009
Hi1Tasks23-Apr-09Inercona.Trial1
b.Trial2
Tasks23-Apr-09Enercona.Trial1b.Trial2
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click()
Dim i As Integer
Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "")
If Results = vbOK Then
With Sheets("Sheet1")
i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1
.Cells(2, i).Value = Now()
i = i + 1
End With
Else
Range("A1").Select
End If
End Sub
Regards,
Kevin
View 9 Replies
View Related
Oct 17, 2012
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies
View Related
May 14, 2014
I would like to conditionally format a column of cells such that it formats when a cell's text equals to that in another column.
Example, in column A I have
1 Cat
2 Dog
3 Mouse
...
In B I have
1 Chicken
2 Mouse
3 Monkey
...
58 Cat
Based on the B column I would like to highlight A3 Mouse and A1 Cat.
Additional complexity, In B I have
1 Chicken Mouse Dog
2 Rat Monkey Fish
3 ...
Given that this is the format I have the text in how would I search column A and conditionally format A2 and A3.
View 4 Replies
View Related
Aug 21, 2014
I am having trouble with a conditional format of a date. I need it to turn the date red if it is 35 days older than today.
View 3 Replies
View Related
Sep 9, 2008
I have a conditional format that I wanted to add another argument to, but although the statement is true, conditional format will not toggle.
My original argument was:
View 14 Replies
View Related
May 26, 2009
Maybe I'm getting a blank, maybe the answer is so easy, but lately I canīt solve this: How do I use conditional format to change cell color if cell value (date) is not workday?
View 4 Replies
View Related
Jul 12, 2009
In column B I could have blank, text or text containing the word "track" or "Track". In column C I could have Blank, "yes" or "Yes" or "no" or "No"
Only if B text contains "track" or "Track" and/or C contains "yes" or "Yes" I want to conditionally format B.
This does not work:-
=OR(FIND("track",B1,1),FIND("Track",B1,1),C1="yes",C1="Yes")
View 5 Replies
View Related
Aug 29, 2013
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
View 3 Replies
View Related
Dec 9, 2013
is there a way to have a cell display a certain text if it is empty?
i.e. i would like all the blank rows in a section of my spreadsheet to have a grey fill and display the text "Please input your description here" if the cell is blank.
View 8 Replies
View Related
