Consolidation of data from multiple worksheets of a workbook in a different workbook.
The, to be copied ranges are static at column B, E & AB. However, the data is required to be copied below each other for each sheet. Also the name of sheet is required to be assigned to every copied data in consolidated file...
Suppose i have 5 sheets with data... then in the consolidated sheet i need name of "sheet1" to be assigned to all the copied records and so on for all the sheets...
Sub trial()
Application.ScreenUpdating = False
Dim Wb As Workbook
Dim path As String
I have data that varies in string length across sheets but I would like to consolidate it based on name. Ideally, a pivot table would make sense to me but I have never used one across sheets (if it's even possible). I've attached a sample sheet I'm working with. This is very simplified, but assume that the shaded, gray fields are locked. Essentially, this is simulating that is getting pulled from software.
I have many sheets in an excel workbook. Each sheet contains some data. I want data of all sheets into one sheet in the same workbook. The data of sheet 3 should appear below the data of sheet 2 & so on. I leave the first sheet of the workbook blank so that data of remaining sheets can be consolidated in the first sheet. Therefore I wrote the following code:
Public Sub consolsheets() Dim a As Integer Dim rng, rng2 As Range a = a + 1 For a = 2 To Worksheets.Count Worksheets(a).Activate Set rng = Worksheets(a).UsedRange rng.Copy
[code].....
Data of row 3 of sheet 2 (ccccc) is overwritten by data of row 1 sheet 3 (11111). Similarly, data of row 3 of sheet 3 (33333) is overwritten by data of row 1 of sheet 4 (@@@@@).
This problem is not faced if the sheet 1(blank sheet) has some data.
I have 3 tabs in my spreadsheet that I want to combine in a Pivot Table. All 3 tabs have the exact same headings in Columns A-J. I want to create a pivot table to pull in all the data from the 3 tabs while using the Current Column headings to create the pivot table. But the pivot table wizard is only giving me "ROW" and "COLUMN" which does not allow any flexibility to create the table the way I want and move the various column data around.
Is there a better way to Pivot Table data from the separate tabs? My data on each tab is changed weekly and I was hoping to just update the pivot table when the data changed..
Problem: I'm attempting to consolidate 3 columns of data that is a varying number of rows in length (a range of 0-1000 roughly) for 53 different worksheets (1 per week of the year, named '1' , '2', etc.). All three columns on each page are the same length. What I want to do is consolidate all the data onto one worksheet 3 columns wide and X rows long (so one week's range of data after the other, but it doesn't have to be in any specific order). I am looking mainly for code because that seems to me like the best option at this point unless someone can provide a viable alternative.
What I've tried: I've tried on a smaller scale, 5 worksheets, naming the ranges using the OFFSET function to create a dynamic range and then trying to paste one right after the other with no luck getting it to paste such a large range. Going along with that I chopped and dropped some code from another online source (forum? tutorial? I don't remember) and modified it to consolidate the 5 named ranges, however, the code does not really seem feasible for 53 named ranges. Loops seem reasonable, but I couldn't come up with an easy way to cycle through the worksheet names and named ranges.
I only have a few hours worth of VBA tinkering so I'm sort of lacking, but I have other coding experience so the structures and concepts are familiar just the syntax and finer points are greek to me. I sadly don't yet have the time to sit and learn VBA either.
If there's an easy way to put a few loops in or you think it should loop through and copy each cell rather messing around with ranges then go for it.
Here's what the code looks like after I modified it: ....
I have a list of ID's but in the same list there are duplicates, then I have my consolidation sheet without any duplicates, my issue is that I need to have the contents of a different column for each of the ID's.
Data sheet example
Column A (ID) | Column D (Result)
1111 first 2222 other 1111 second 3333 another test 2222 other two's 1111 third
The spreadsheet contains 8 worksheets, of which I am only concerned with 7 as the 8th merely presents a graph.
The first 6 worksheets all contain raw data exported from BMC Remedy indicating the names of users who logged incidents to have their passwords reset or their AD Accounts unlocked over a 6 month period, hence 6 worksheets (per month basis).
The 7th worksheet contains raw data from another application known as FIM (A MS based interface which allows users to reset their own passwords) indicating all users who are registered to utilize this functionality.
The goal of my exercise is to consolidate the data and sort it to such an extent where I can ascertain which users phoned the service desk to log an incident for a password reset, even though they are registered to do it themselves via FIM ... I have been going through the list manually and it took me 10 solid hours to go through 265 ... ... ... ... I have 3'900 to go through!
I have around 21 excel files in a particular folder all the files column headings are same and but number of line differ from 0 to 50K. Overall all 21 files will have more then 2 Lakhs lines.
i require a code which consolidate the all 21 files in to single workbook. if first sheet in full then data should copy to next sheet, so on. I also require file name in the first column of destination file when files are being copied.
On the spreadsheet there is 31 days (a separate worksheet per day).
at the bottom of each sheet there is the case notes for that day. I would like all that information collating on the last sheet of the workbook (named Cases).
I would like to be able to sort through that data with the use of some drop down menus.
All i need to sort is the Brand and if the case is open/closed.
what to do so I can try myself or using the attached spreadsheet be able to sort this problem out. If you choose to use the spreadsheet to meet the requirements
It is data for a time study to compute labor hours. I have managed to group everything together per "work order" and "Employee ID". I am trying to sum up the labor hours by work order. I know it sounds simple but I do have another question. Once the total hours are set. Are they still available in the same format when put in a Pivot Table?
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I have a workbook with 7 different worksheets (site_worksheets) containing data about various sites. I need to copy all this data into a single worksheet (worksheet_a). I want worksheet_a to update itself when another row of data is added to any of the site_worksheets.
I have 9 sheets of sales data, some with over 50,000 records. I need a way to present this information in another worksheet so I can bring up just the data based on individual brands. I understand a pivot table is needed however I cannot see how to gather data from multiple worksheets.
For example:
I need to look at all the different sales for Product A, which appears in multiple worksheets. Product A is broken down to store-level, with records for number of sales in each store, one record for units and one for value (for the same store and product). Is there a way I can get the data for all of Product A in one worksheet so I can then easily add the totals across all stores by both units and value?
E.g. Store 1 - Product A - 10 units Store 1 - Product A - £20 Store 2 - Product A - 7 units Store 2 - Product A - £14
I'm trying to consolidate inventory for my department. I have Part#s in (column E) of all the worksheets and the amount of the product in (column C). I need a formula that finds the specific part# (in column E) and adds up the total amounts (in column C) in another worksheet has the part#s and amounts in same column.
Im trying to import data from multiple worksheets. The data from these worksheets are scattered throughout the different work sheets.
I would like to extract the specific data from each worksheet into a master template that ive created. 80% of the worksheets templates match my master template.
Is there any way to do this without taking 1 week to complete?
I run a report each month and I have several hundred lines of data with Heading 1 being the customer Name. I would love to copy this information to individual sheets based on the customer name as showed below (Output).
I have data in multiple worksheets and I want it all combined in 1 excel sheet. The 1st worksheet is named as A and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. 2nd worksheet is named as B and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. and there are some more worksheets like that. The start point of data will always be same but can end till any row. Can I get a code for collating all together in one sheet,
I have 37 workbooks that are timesheets for employees for calendar 2007. Each one has 52 tabs for the weeks of the year. Each worksheet has a particular column that needs to have a drop-down selection. That's working fine as long as I do it one worksheet at a time.
Since I don't relish doing this 1,924 times (37 employees x 52 weeks), I opened a workbook and selected all tabs (first, shift, last), but when I tried to highlight the cells that need the drop-down info, "Validation" under "Data" was grayed out. I checked another sheet and found the same thing. As long as I do it one worksheet at a time, it works fine.
Can data validation, for the purpose of adding drop-downs, not be done across multiple worksheets within the same workbook?
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
is there a way to clear data in all worksheets according to the ranges specified in the code below, I have around 34 worksheets in which i need to clear data and i dont want to write the below code 34 times.
Sub Clear()
With Sheets("Rec") .Range("A7:C7").Clearcontents .Range("E7:O7").Clearcontents
I have a summary sheet where I am trying to move data from 20 to 30 different worksheets (in the same workbook). I am refrencing a code from column a in the summary sheet. Then I want to lookup that code in a column in a different worksheet then go down 150 rows and over 1 column to return the value from that cell.
abStandardsUnit Time (Minutes)CodeTaskPrepFabClean UpTables & BenchesFP10106' Table Process StepsA6SHAssemble 6' Table Seat Holders0.151.750.19A6StAssemble 6' Table Seats0.603.150.13A6TAssemble 6' Tops5.4715.002.22
So I am trying to use vlookup to find the code "a6sh" in a worksheet, then once I find that code (column), I need to go down 150 rows and return that cell value into the "prep" cell. The value in the "prep" cell is an average of the 150 rows, one column over from "a6sh". I don't want to have to do this manually.
I have a worksheet that was created by converting a pdf file of 40 pages or so. The conversion process created 40 separate worksheets in one workbook. I would like to consolidate all the data on to 1 large worksheet.
I am using the code below to transfer data from a single sheet to approx' 200 sheets. These sheets are staff training sheets, one per staff member. This code works great. What I would like to know is, is there a way to then sort the data on these sheets in decending order? I have tried on sheet change but this seems to stop the transfer to other pages.
Sub Tranfser() Dim shtTemp As Worksheet Dim lngOutRow As Long Dim rngData As Range For Each rngData In Range("A5", Range("A5").End(xlDown)) Set shtTemp = GetWorksheet(rngData.Offset(0, 1).Value) If Not shtTemp Is Nothing Then ..........................
I have 5 worksheets (all formatted the same) with data inputs from row 19 to 119 and columns A to BA. After row 119 I have several sums based on the data that is being entered on rows 19 to 119, I don't want this data being copied over. In most cases all rows from 19 to 119 will not be used, so I would only like to copy the rows that have data. To complicate matters, there are times when there will be blank rows within rows that have data. For example rows 19 to 25 will have data and 26 will be blank but rows 27 to 38 will have data. The blank rows are identified by column A (Job Number) being blank. This occurs because a job is dropped from the schedule and is no longer necessary.
In the end, I would like to have a button using VBA that will first clear the data in the new sheet (the sheet that is being populated with the information) and then re-populate it with updated data from the 5 worksheets.
We are trying to sort a spreadsheet by the data in column I. This column refers to a state. I need help creating a macro that can sort column I so that different states go into different worksheets.
States ME, NH, MA, RI, CT, VT go to a worksheet titled 357899, states NY, NJ would go into worksheet 351835, states MI, IN, OH would go into worksheet 351857, and everything else would go into worksheet 351836. The main data worksheet where the info is being sorted from is named All_Accounts. Column I has a header labeled State, so data actually starts in Row 2. I need the full rows copied to the new worksheets while leaving the main All_Accounts worksheet in tact.
I have multiple sheets in a workbook. The sheets are protected as this workbook is used by other users also. I need to enter same data in column E of around 15 sheets. I select multiple sheets with ctrl+ or shft+click method and enter the data in the required cells. The problem is after selecting multiple worksheets, I'm not able to enter any text but I can enter numbers. When I remove the protection from all the sheets it is possible to enter either text or numbers.
I am trying to use a main page to enter in all information for tracking worksheet. I would like to create a macro that will paste the information from the first week into column A, the info for the second week, into column B etc. It should also be able to paste information to another worksheet when the first month has been completed.