I have a master workbook that has three sheets: Application, Equipment, Storage. I have over 500 other workbooks that have those same three sheets in them. Those workbooks also have other worksheets that I do not want. How can I create a macro that will open every one of those workbooks and copy over the data from each one of those 3 sheets into it's counter part in the master workbook?
View 3 RepliesI have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets
2. Open Workbook A-2014 paste the sheets
3. Save and close Workbook A-2014
4. Close workbook A without saving
then doing the same for Workbook B, etc.
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I'm trying to copy worksheets from different workbooks to one workbook, but it doesnt work. This my code, can anyone spot the error?
The problem is that it stops at the workbook that all the worksheets are supposed to be copied to.
Sub Makro11()
'
' Makro11 Makro
' Makrot inspelat 2008-03-17 av White
'
' Kortkommando: Ctrl+w
'
namn = ActiveWorkbook.Name
ActiveSheet.Select
If ActiveSheet.Range("B3") = "" Then
ActiveSheet.Range("B3") = "v 16,"
End If
If ActiveSheet.Range("B3") = "v 15," Then
ActiveSheet.Range("B3") = "v 16,"
End If
ActiveSheet.Copy Before:=Workbooks( _
"KI.xls").Sheets(2)
Windows(namn).Activate
ActiveWorkbook.Save
ActiveWorkbook.Close
End Sub
I have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
View 3 Replies View RelatedI have a few hundred multi sheet workbooks that have address data in one of the sheets that I wish to collate into a single worksheet to use as a mail merge with word.
View 5 Replies View RelatedAll i need to do is copy all worksheets in lots of workbooks into one workbook with multiple sheets, easy right!!
View 2 Replies View RelatedHave a workbook with approximately 25 worksheets in it.
I want to copy/paste/value each worksheet and save it as it's own workbook.
My code doesn't work, it hangs up on ws.copy every single time, on Excel 2007 and prior versions.
Sub SaveWS()
Dim wb As Workbook
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
ws.Copy
Set wb = ActiveWorkbook
wb.SaveAs "t:dir1expenses" & ws.Name & ".xls"
wb.Close False
Next ws
End Sub
I would like to append multiple workbooks with multiple worksheets in a separate workbook. For eg. I have workbook "A" with sheets 1,2,3 and workbook "B" with sheets 4,5,6. Now I want to append "A" and "B" to create workbook "C" with sheets 1,2,3,4,5,6.
I have a folder - U:30000 - that contains a number of identically layed out workbooks. What I'm trying to do is, in each, change a number of cell values. Where dominicb's solution to the previous problem didn't work for me, however, is that I need to change cells in multiple worksheets. The cells are specifically:
On worksheet 'Construction': C3 (which is a date), D3 (which is a text value); on worksheet 'FF&E': D3 (the same text value as D3 on 'Construction'. Unfortunately, whoever initially set up the workbook didn't have the foresight to link it!)
Code to merge worksheets from different workbooks stored in different location.
I have a sheet called "Master" in all the workbook I want to combine.
I have a unique password for all the workbook as well.
All the workbooks are stored in different folder location.
I would like to do a paste special values when the consolidation takes place.
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I am trying to copy worksheets from a master workbook to numerous other destination workbooks. I would like the code to check if the destination workbooks already contain any of the sheets being copied and if this is the case, miss out that sheet and move on to the next. Currently, if duplicate sheets are present, a second sheet is created and copied to the destination file.
VB:
Sub CopyTrend()
Dim Filename1, sFileNameAndPath, sThisWorkbookName As String
[Code].....
I have an application where I create up to 400 worksheets based on imported data.
These worksheets are named programatically with a main name and a sheet index number (to ensure no duplication of sheet names).
Typical Sheet names are "VARIOUS (1)"; "VARIOUS (2)"; "PART 1000 (3)"; "PART 1000 (4)"; "PART 1001 (5)"; "PART 1001 (6)" etc.
I want to be able to loop through all the sheets and copy similar named worksheets to seperate workbooks. So all the VARIOUS go to one workbook, all the PART 1000 goto another, and all the PART 1001 goto another. I can only determine the worksheet names by looping through all sheets - as I am not sure what they will be called because it is done programmatically. ALL sheets will contain a "(n)" where n is the sheet number, so I believe can extract similar names from the string preceding the left bracket.
At the moment I just lump ALL the worksheets irrespective of name to a single workbook creating an array and using the SPLIT function. This is very efficient and what it does, and I still want to use the SPLIT function and arrays.
this is the code I currently use, any help much appreciated!!! Please tell me how to modify this existing code to clump together similar names and copy - I guess I will need to loop multiple times to achieve this.
For Each mySheet In ActiveWorkbook.Sheets
Range("Arc").Value = "'" & Range("Arc") & "," & mySheet.Name
If Left(Range("Arc").Value, 1) = "," Then
Range("Arc").Value = "'" & Right(Range("Arc").Value, Len(Range("Arc").Value) - 1)
End If
Next
Sheets(Split(Range("Arc").Value, ",")).Select
Sheets(Split(Range("Arc").Value, ",")).Copy
I have read all the rules, and the guidelines for writting a thread title, and can only hope that my title meets those criteria (Dave, if they do not please do not ban me). I am fairly new to VBA, I have been able to edit other peoples code, and have created a few macros myself, and although I think I know how to use a loop and arrays, I sometimes lack some of the basics, this may be one such case. That said here is the problem I am facing.
I am creating a database, and as such I am sent several workbooks, with each workbook containning several worksheets. Within these workbooks, the naming convention of the worksheets is consistent, though each workbook may contain different number of worksheets. (the name of the worksheets represents a specific size/format).
What I have is a "Setup sheet" that I would like populated with all the data from specific worksheets in the various workbooks. So I would need to be able to get the macro to check all the workbooks, and if it finds a worksheet entitled "Sheet B" (for example) that it copies all that data into the "Setup sheet", and progresses onto the next workbook. I have the loop working and am fairly confident on this side of things, though where I am struggling is getting the Macro to know what worksheet to look at when going through the workbooks.
I need the macro to be fairly dynamic in which Worksheet it looks at so I don't want to simply hardcode the Worksheet name into the macro, rather I would like to be able to specify the worksheet name based on a cell value in the "Setup sheet". so going back to my earlier example if the cell value in the "Setup sheet" = "Sheet B" then the macro should get data from the worksheets entitled "SheetB" in the workbooks, if the cell value in the "Setup sheet" = "Sheet F" then the macro should get data from the worksheets entitled "Sheet F".
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
(Code at the bottom of this message)
I have a file with a roughly 20 workbooks. I need to split the data in each workbook into two sheets, rename each sheet, then export the data to template with multiple sheets. After splitting the data into the appropriate sheets in the original workbook, Sheet1 in has only 1 row (plus header) and needs to be transferred to "Project Entry" in the template; Sheet2 can have any number of rows (less than 100) and needs to be transferred to "Activity Entry" in the template. I need to save the template based on the value of cell A1 on "Project Entry" sheet of the template. The organization of the columns in the original workbooks is different than that of the template, so this is not a straight copy and paste operation. The cell formatting in the template must be retained.
I have half of this under wraps. I've cobbled together some code that splits the original data where I need it split, copies it to new sheets and saves the files. I now need to figure out out to get it out of this saved file and into the template.
The crosswalk of values between the original data (Sheet1) and the template(Project Entry) needs to look like the below. So, variable 1 exists in column B of the original and needs to populate column B of the template, and column Q in the original needs to populate column G in the template. The variables and column relationships are different for Sheet2/Activity Entry.
SPREADSHEET COLUMN
Variable
Original
Template
[Code]....
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY:
A1
A2
A3
G21
G24
G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s()
Dim MyDir As String, FN As String, SN As String, NR As Long
Application.ScreenUpdating = False
I am attempting to move data between two spreadsheets and have written a macro that initially copies one cell E2 then pastes it correctly into another workbook. I now need to modify the macro to include additional ranges. E2, E3, G2, H2, N1 to U3. I am stuck to the best method of selecting these ranges and then pasting them as I cannot get it to work. I have included a copy of the code below.
Sub getdata()
Dim filename, fileselected
Dim a1(1 To 20)
Dim WB As Workbook
ChDrive ("g:")
ChDir ("G:Folder name")
fileselected = Application. GetOpenFilename("Excel Files, *.xls", , "Select your Files", , True)
If StrComp(TypeName(fileselected), "Boolean", vbTextCompare) = 0 Then
ChDrive ("g:")
Exit Sub
End If.......................
I am looking for an VBA solution to copy value from multiple workbooks in the same folder.
The master workbook will contain two columns: a list of date (col A) and value (col B) copy from other workbook.
Those multiple workbooks have the same structure which contain a date (A1 cell) and number value (B1 cell)
Basically I want to perform
i) Date matching A1 value in individual work with master workbook
ii) If entry date is matched, then copy B1 value to column B in master book
I have a database from which I extract 5 different excel files. For arguments sake, they are called File 1, File 2 etc. Each of these workbooks will have a sheet called 'Raw Data'. These will all be save in the one directory, C:Data, for example.
I am after a macro that can copy all the data from each of the workbooks, on the sheets called 'Raw Data, however the data in each of the workbooks will vary in length and width.
The workbook which I want them copied to is called "Template" and I would like the copied data onto separate sheets in this file. If possible I would like them copied to already named sheets, for example in the "Template" file, sheets may be called "Raw Data1", "Raw Data2" etc.
I found a great code for copying worksheets from multiple workbooks (up to 2000 workbooks) into one new workbook. It works perfectly for 99% of the copying/merging that i do. The only issue with the code is that it only copies from the active sheet in the other workbooks. I need it to copy from a specific sheet ("Travel") in all of the workbooks that i select. I've tried many ways to edit the code to change the activesheet to "Travel" but i cannot get it to work.
Option Explicit Sub CombineDataFiles() Dim DataBook As Workbook, OutBook As Workbook Dim DataSheet As Worksheet, OutSheet As Worksheet Dim TargetFiles As FileDialog Dim MaxNumberFiles As Long, FileIdx As Long, _ LastDataRow As Long, LastDataCol As Long,
[Code]....
I need to copy multiple workbooks of similar format into one new workbook called "ZZZ.xls". I have developed the below code but I got an error :
Run-time error '1004':
Paste method of worksheet class failed.
Sub create_intransit_stock_FOR_RCP()
Dim Wk As Workbook
Dim FileToOpen As Variant, i, j, k As Integer
Dim NewWBName As String, NewWBName1 As Workbook
Dim OutFileName As String
OutFileName = "C:My_DataZZ.xls"
'On Error Resume Next
FileToOpen = Application.GetOpenFilename(FileFilter:="Microsoft excel files (*.xls), *.xls", Title:="Press CTRL Key to Select Multiple Files", MultiSelect:=True)
If IsArray(FileToOpen) Then
For i = LBound(FileToOpen) To UBound(FileToOpen)..............
i have a group of workbooks all housed in the same folder 'ro24_ws' - who's path is -
C:UsersdavezDocumentseq
o24_ws
what i am looking for is some code to copy a worksheet named 'ro24' from each workbook within this folder into a single workbook
In a folder I have a group of approx 30 workbooks which each contain up to 200 worksheets. All the worksheets contain a set of formulas in the range FR1:FT30. I now need to update these formulas.
I have a precedent file called prec.xls & i need to copy the range FR1:FT30 from this file to all the worksheets in workbooks i have described above.
I have 2 workbooks:
- 1 contains tabs for each day of the month and each tab contains a couple of big tables.
- the other is where I want to gather certain data from the first workbook, selection should be made via a condition. I want to copy not the entire row that meets the criteria but lets say the first 4 cells of the row that meets the criteria (code below still copy's entire row, if you also have the code for my goal I would apreciate it very much).
The next part of code is what i've found on the internet and i'm trying to rebuild it to my situation, the biggest problem is the extarnal link to the 1st workbook sheet it seems to hang there everytime. If I copy a part of the table to a empty sheet in the 2nd workbook just linking to that sheet works so the problem is with the external linking what am I doing wrong?
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error Goto Err_Execute
LSearchRow = 4
'Start copying data to row 2 in Sheet2 (row counter variable)
LCopyToRow = 2
Sheets("[D:Sudden Death BestandenCHC NetherlandsFuelFuel2007januari.xls]1!").Select
While Len(Range("A" & CStr(LSearchRow)).Value) > 0.........................