Copy Info Of Name Range?
Jun 24, 2013
I want to copy all the information from a name range from a different workbook and paste it in my activeworkbook , but the trouble that I'm having is that it doesn't copy all the cells of the name range, just the first cell of the name range Here is the command that I'm using, not sure if it's the best approach
Code:
ThisWorkbook.Worksheets("US Input").Range("usInput").Value = Workbooks("US Input File.xlsm").Worksheets("US Input").Range("usInput").Value
Forgot to clarify that the name range is the same for both workbooks
View 2 Replies
ADVERTISEMENT
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Jul 23, 2012
My friend has multiple workbooks, each containing data. Each worksheet with have the same number of columns but a variable number of rows
Thinking through, what I deduced the simplest thing to do would be this: Have a macro that would Highlight all the data except the title row in the active workbookSwitch to a different workbook called "Consolidation"On the next free row, paste the information
They can then just activate another workbook and run the macro again
View 9 Replies
View Related
Mar 9, 2013
I want to copy Four Cells of info from one tab to another if the value of a cell is a specific value is this possible?
View 2 Replies
View Related
Nov 25, 2008
I have a workbook with a number of worksheets. (say they are called A, B, C, D). Each sheet is exactly the same.
what i would like to do is look down column A in each sheet in turn and where there is a "y", it will copy the entire row of information (say A to J) to my "master" sheet.
i want it only to copy (not delete) the information, but then enter a "y" in row A for all the columns it has copied.
(thereby meaning the next time i run it, it will not copy those rows again.)
View 9 Replies
View Related
Dec 4, 2013
So i have two sheets with user info and so on, my boss asked me if i can transfer person names from sheet1 to sheet2 but each name must be in correct place acordingly to username column
Capture6.jpgCapture7.PNG
in capture6: in F18 you see 139401arle and G18 is supposed to be his name but it's in other shhet as you can see
in capture7 his name "Ar Sveinung Leira" is in E5
is there any way to transfer names so that they go in right place?
Kopi av Computer List - 02 12 2013.xls
View 4 Replies
View Related
Aug 8, 2014
I need to create a new excel template for work. I was planning to copy a few worksheets from an old workbook over into the new workbook, mostly just for formatting for some graphs/tables that I would then link to the new workbook. A coworker said I cannot do this as copying from an old workbook will bring in "hidden" data that could some way impact the integrity of the new workbook and that the copied/old worksheet would FOREVER be linked to the new workbook no matter what I do. Is this true? If so, are there things I can do to remove any reliance to the old workbook.
View 1 Replies
View Related
Mar 20, 2014
In column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
View 3 Replies
View Related
Jun 4, 2009
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
View 14 Replies
View Related
Apr 24, 2013
What the Macro has to do is this.
It takes an specific word from a certain number of files that you can choose from an add file window.
Then when you choose those files the macro starts to run every file and look for an specific word, in this case is "ROFO March 2013".
When it finds it, The macro creates a new workbook( You create the name of that workbook y the first place of the macro, when you choose the files that you want to look for that word).
So, When the macro finds the word ROFO March 2013, it copys all the columns that has that name, and keeps looking until the file ends.
And paste all that info in the new file, A consolidate File.
I have change all the names of variables of the macro so you can understand it.
Code:
Sub copy_data(ByVal Origin_File_route As String, ByVal destiny file As String)
Dim Origin_File As String, RsBusq As Range, ROFO As String
Dim Rango As Range, Fila As Long, lastrow as Long
origin_file = Dir(origin_file_route)
[Code] .......
View 2 Replies
View Related
Apr 17, 2014
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
View 1 Replies
View Related
Feb 15, 2010
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
View 9 Replies
View Related
May 25, 2014
I have a column of Data (A1:A20584) that includes information for different contacts
BEGIN
VERSION
N
FN
TEL
TEL
EMAIL
ADR
ADR
ORG
END
I need the information to list as Row Titles (horizontally) so I can sort. I hope I am saying this correctly.
View 2 Replies
View Related
Nov 13, 2009
I am comfortable with getting a macro to copy & paste where I need it to, however how to get the macro to recognise when a certain value has stopped.
For example in Column B on "DataDrop" are all the divisions that exist in my company i.e East Anglia, Essex, London etc. There is an empty row between each division.
View 4 Replies
View Related
Jun 17, 2008
My company has an excel file that has our new customer's information (colum A & B are first & last name;Column C is customer email; Colum D is cutomer phone, ect...)
once that information has been entered we have another excel file that will load all of a customer's information, and then be pasted into a welcome letter into MS Word for their confirmation & emailed to them
The problem I'm running into, Is that I do not know how to populate my nex excel sheet with the info I want only from a specific line.
I would like to enter a line / row number (for example '6') and than have excel go to that file & copy/paste the name, phone, email, company name, ect. into my new excel sheet
I have one that works already, but the previous owner PW protected it & hid his formulas/macros, so I'm in a dead end now...
View 9 Replies
View Related
May 12, 2014
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies
View Related
Aug 22, 2014
I have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
View 1 Replies
View Related
Aug 19, 2009
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
View 11 Replies
View Related
May 3, 2007
I have a sheet that users fill out and there is a macro on that sheet to copy the info to another workbook, save and close.
for some reason, the date, which originates from a cell with the value "=Today()", and when pasted in to the new book, it is pasted values.
the issue is, every so often, the date will say 09/26/10 and continue to do so for quite a few entries.
i have tried almost everything. I checked the dates on the computers, and all are fine. i even went through it step by step, and when the data pasted it, it was 09/26/10.
View 9 Replies
View Related
May 29, 2009
I have this code going for a sheet i've been working on, but thers only one thing I can't figure out how to do.
I want it to take the text that was entered in the "Grid Date" input box and stick it in the bottom 10 cells (plus one space). IE - if A14 is the last used cell, paste it into A16 through A26.
View 2 Replies
View Related
May 31, 2013
I need to pass range information (eg. WorkSheets("abc").Range("A1") as text or ??) from a cell (ie the above text is in a cell on some worksheet, say "XYZ") to a VBA procedure or could directly use it in the procedure, similar to...
Sub MyProc(RngInfo as string [or?])
dim RRng as range
Set RRng= RngInfo ??? it is this part I'm really not sure how to do
where RngInfo is a worksheet that has a "named" cell that contains the above cell with the indicated range in it.
eg. RngInfo is worksheets("XYZ").Range("D1") where D1 contains the text (or ?)WorkSheets("abc").Range("A1")
I've only indicated these as text items because I'm not sure what/how you would do this. The end purpose of this is to pass variable Range information from a cell on a WS either into (or use within directly) a VBA Sub. I guess I could pass the WS and Range Address as a single string separated by a "Char" and use Split to separate them and then recombine using Worksheets(Parm(0)).Range(Parm(1)) but it seems like it should be easier than that.
View 9 Replies
View Related
Mar 22, 2007
Have a spreadsheet for creating employee schedules (any number of employees, 3 rows per employee, 5 columns for each day). I want to move all employees' info for one day (5 columns and XX rows) to another area and then clear the employees' data for that day. I have the code working for Monday but I don't want to duplicate it 6 more times for Tue -Sun. I have set up named ranges (i.e. MonFT, TueFT, etc.
I would like to call one subprocedure to do this and pass parameters for each day so the ranges can be changed to reflect the desired day?
I am doing this for holidays; i.e. if there is a Wed. holiday, store all of Wednesday's data and clear Wed. Then restore all Wed data when preparing the schedule for the following week.
View 7 Replies
View Related
Jun 4, 2014
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
View 1 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Mar 2, 2008
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
View 10 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Oct 7, 2009
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Sep 24, 2013
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
View 3 Replies
View Related
Dec 23, 2008
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
View 2 Replies
View Related
