I have attached a spreadsheet where I need the cells B2 to B8 to return the number of Y/P's (in column D) by Unit (in column E). There are duplicate entries in column D, however, if entry is duplicated, it is only to be counted once. Is there a formula to be able to do this? I don't know anything about VBA so would prefer a formula if possible.
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?
there are unique entries like AU0896 etc. that are repeated in my list. my job is to find how many unique entries there are and add the count at the end so, basically if there are 6 AU0896 entries, then I must create a AU08966 value.
formula to find duplicates and count only on instance of them.
image below:
Uploaded with ImageShack.us
As you could see on column A i have several entries,some of them duplicated. In column B i have a formula to check weather the value on column A is duplicated or Not. From this values i want to count only one instance of duplicated entries. I want to have one instance of Oscar to be counted as original and regardless the number of duplicates i want to count only 1. i want this not only for Oscar but for all the duplicates with more than 1 duplicate result.
how to count how many times a word or text is displayed in a column.
Say this is Column A Can any formula be used to tell me that T1409 was duplicated 3 times and T1527 was used 2 times. The rest of the numbers only triggered once so I dont care for those numbers. I only want T1409 and T1527 to pop up and tell me how many times it was used.
macro that takes the number data and if it is the same number as in the previous row(s) just delete the extra number(s). It also needs to put in a factor in the next column of how many times the number was the same. For example:
I often need to merge multiple occurences of data (such as account numbers or names) and to sum or count the values associated with each invividual instance (eg cost or number of entries). Data can often be thousands of rows and varies every time. For example:
Col A Col B Ken 5.9 Ken 12.6 Brian 5.5 John 6.4 Fred 9.9 Fred 11.6 Fred 2.0
I have two columns of data, and I need to create a third column to count the number of times that same line appears in the document (and then remove all but the first copy of that line). my data looks as follows (and it is sorted so all duplicate rows appear directly next to each other):
Adam1998 | Jan Adam1998 | John Adam1998 | John Adam1998 | Paul Adam1998 | Peter Adam1998 | Peter Adam1998 | Peter Adam1999 |John Adam1999 | Paul
I need this to look as follows: Adam1998 | Jan | 1 Adam1998 | John | 2 Adam1998 | Paul | 1 Adam1998 | Peter | 3 Adam1999 |John | 1 Adam1999 | Paul | 1
a quick macro/VBA project that would allow my to duplicate existing rows based on the count in one of the cells. For example, my data currently looks like this:
I have a workbook where i am trying to find duplicate accounts. I need to get a count of these duplicate accounts and i need to find the accounts as well. One last thing the workbook covers an entire year and i would like a formula that will cover the 12 sheets to provide the results.
I have a tab (All Data) full (column A - S) of daily data, the date is in column A, there's a unique identifier is in column D. The daily data can be repeated multiple days. I need to remove the duplicate data for the unique identifier for the week. I'm having problems with the removal of the duplicate data. This is what I currently have for the weekly (2nd week of the year) data totals:
I'm trying to make a combo box that lists only unique entries in 2 columns but also has a count in brackets beside the entry. For example:
Apples (8) Bananas (13) Grapes (2)
The code I have to populate the box is:
Sub RemoveDuplicates() Dim AllCells As Range, Cell As Range Dim NoDupes As New Collection Dim i As Integer, j As Integer Dim Swap1, Swap2, Item
Set AllCells = Range("e3:f370")
What can I add to count how many times an entry is listed in my range? Also, the filter works off text from the combo box, how can I remove the counts prior to filtering? Here's what I'm using now to filter:
Private Sub SrchBtn_Click() Worksheets("sheet1").Range("b1") = ComboBox1.Value Range("A2:J1000").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _ Range("L1:M3"), Unique:=False ActiveWindow.SmallScroll Down:=-5 Unload Me End Sub
I have a column that is filled with different names. Some names appear more than once. There is one name in fact that appears four times.
I am looking for a formula, or VBA if that's necessary, that will look through the range Y2:Y50, and return a value of 4, because the person that has the most duplicates, her name appears 4 times.
If everyone's name appeared only once, except for a person whose name was in that range twice, then the formula would return a 2.
I want to count the number of duplicate rows where the exact text in columns A and B match. An example is as follows, where column C would be the desired result. Note that there are hundreds of different text values of column A and hundreds of column B, I just simplified the example.
I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).
What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.
Picture: Column C Column D 111111 M 111111 M 111111 M
[Code]....
Currently calculates: M=9, F=2
Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.
Equation currently using to count only filtered values (in this case "males" and "females"): ="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales 23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a sheet where I input 8 columns of data from an email template which is sent to me throughout the day. I enter data in one row per email along the 8 columns. eg A1 to H1 then A2 to H2 etc. Column C has the entry as a job number '123456'. I need to be able to see if the same job number appears more than once. In one week I have input 135 rows of data and have spotted 3 occasions where the same job number has been called in. Any way I can set up a seperate sheet which will search and show duplicated rows from sheet 1.
I have a worksheet change event that prevents a person from entering a positive number in 2 different cells. If they enter a number in one cell, the other locks, and vice versa. The code is below.
Is there a formula I can use in B2 whereby if the value in A2 is identical to the value in any other cell in column A, then return the value "duplicate" in B2?
I've searched the forums, and there are a lot of similar questions, but not quite what I'm looking for.
I have a large list of song titles, in one column. As an example, Song A is listed 4 times, Song B is 10 times, and Song C is 6 times.
Is it possible for Excel to go from this:
Song A Song A Song A Song A Song B Song B Song B Song B Song B Song B Song B Song B Song B Song B Song C Song C Song C Song C Song C Song C
to this:
04-Song A 10-Song B 06-Song C
The numbers wouldn't necessarily have to be in the same cell, as long as I can sort the list from highest to lowest numbers while keeping the song titles matched with the correct number of instances.
how would i run a macro to merge duplicate cells in a column
For example, i have lots of data in columns A, B and C
however some of the data in columns A and B is the same. Column C data never changes. so to make it easier to read, i would like to merge these cells (which are the same) together?
-ColumnA- Cat Cat Cat Dog Dog Dog Dog Mouse Mouse Mouse Mouse Mouse
would become.... (with all the other data the same)
-ColumnA- Cat
Dog
Mouse
I dont want to lose any of the rows, as the data in column C is always different. I just want to merge the similar ones, so its easier to read.
Its a bit like this, but i cant even come close to getting this to work: [url]
I have two columns of numbers (2003), some of which match. Each column is of a different length and is arranged in a different order. I need to find all the number matches between the two columns. I can sort them ascending numerically but the columns are still disjointed with only occasional number pairs being readily visible.
I have two columns each of 5000 cells. Some cells of column A are duplicated in column B. The duplicates are not necessarily on the same rows. How do I delete the duplicates?
I've spent hours researching for an answer and I've tried Data>Filter>Advanced Filter many many times and it does not work. The two columns just sit there. Shouldn't this be a very easy thing to do in Excel?
I want to make a report wherein the macro has to merge cells based on duplicate cell values in column A and to put corresponding data in columns into one cell which we do manually by pressing ALT+Enter.
How this can be done through a macro or other tricks as I need it for a large report and need to use repeatedly.
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?