Count number of times numbers occur in long Excel data list. I get list of bar code entries representing how many times parking passes were used each month and need to count occurences by number. Ex. 890093= 23, 890097=123, 980403=0, etc
View 4 RepliesI'm Tim, and I'm just an average Excel user who found his way here through Google. I did a little poking around and this looks like a great community. Maybe I can contribute on future visits.
I'm wracking my brains over this one but I can't seem to get anywhere. What is easy on a single worksheet becomes a conceptual nightmare when extended across multiple sheets........
I have an Excel 2007 workbook with ten worksheets, each is 5 columns by *about 50 rows. My column headings are the same on each sheet. All of the cells are formatted as Text.
I need to find to the occurrence/count of a cell value in a column/range.
Like say column A has following values
A12
A12
A12
A12
A13
A13
A14
A14 and so on ..
I need to find the no. of times or count A12 is there in the column A.
I have tried using .count function in the range A but this instead gives the number of cells in complete range A
Is there a formula which will result in the 1st occurence in a set? I would like the formula to look for "Y" in columns A, B and C and let me know the month in which "Y" first appears. I've attached a spreadsheet to make sense of this.
For example, Header Row
(A1) July (B1) August (C1) September (D1) 1st Occurence
Rows
(A2) Y (B2) N (C2) N (D2) July
(A3) N (B3) N (C3) Y (D3) September
(A4) N (B4) Y (C4) N (D4) August
=find("a",F3,3) will find where the letter 'a' occurs for the third time in cell F3 but how do you find the last place 'a' occurs in cell F3?
View 4 Replies View RelatedHow do I insert a row on top of the first time a value is found?
e.g.:
initial:
B
B
B
final:
"There are 3 Bs"
B
B
B
I have a list of names in B8:B200 (unique)
I have another list of names in I7:I15
I want to count how many names in B8:B200 that matches any of the names listed in I7:I15.
What is the formula I would need to use in the attached spreadsheet to calculated the lowest or first occurrence within a row? As you can see in the top table Product A is delivered in weeks 2, 4 and 6, what I need is the lower table to show the first week i.e. wk 2 that the product has been delivered.
View 2 Replies View RelatedI have attached a sample file. What I need the formula to do is lookup the value in Column A on 'EE Data Sheet' (which has multiple occurances of the same value) and give me the corresponding value in Column E (ID #) only if the date in Column K (Service Dt) is greater than 7/21/2008. The return value needs to be on the '151_SD Sheet'.
In other words, I need the ID number from Column E on the 'EE Data Sheet' returned to me on Sheet 151_SD for each occurrance of 1806-151 (Column A on EE Data Sheet) only if the date in column K is greater than 7/21/2008. The areas highlighted in yellow show the data to be returned on the 151-SD sheet. I tried vlookup & match and hlookup & match, but I only got the first occurance of 1806-151.
I am wondering if there is any way that I would be able to see when the last time an instance occurred within my Pick 3 lottery spreadsheet.
I don't know that I am stating this correctly, but here goes.
Pairs are located in columns F:K. Dates are in column A.
If I wanted to determine the last time that the 17 pair occurred, what formula would I use to give me the actual dates that this pair occurred on .
I need the dates listed so that I will then able to count the actual days in between hits.
Or would it be simplier to just try and use the filter feature of excel??
How can I find the 2nd occurence of a value in a list and lookup a value in the same row?
My data looks similar to this:
Name.............Order No
Alan...............1234
Bob................4567
Steve.............7890
Alan...............6543
Steve.............0985
etc.
How can I lookup Alan's 2nd Order No.?
I have a spreadsheet that contains the number of faults in 12 hours. What I would like it to know the frequency of fault i.e 204 faults means a fault every 00:02:03
Is there a formula I can use.
Transpose rows at every occurence of a value in column ...
View 9 Replies View RelatedI am looking at a register of documents that are constantly being revised. What I need to do is mark up which ones need to be reviewedDocument RevisionViewedapples1apples2yapples3apples4apples5pears1pears2ypears3pears4oranges1oranges2oranges3
If a revision is marked as Y then previous revisions don;t need to be looked at and can be marked with n/a anything older doesn't need to be reviewed except for the latest one. In the above table if apples revision 2 has been viewed so rev 1, 3, and 4 are no longer relevant and only rev 5 needs to be reviewed. Pears rev 2 has been reviewed so on rev 4 needs to be reviewed. No Orange documents have been reviewed so only rev 3 needs to be reviewed.
The above is just an example my table consists of 8000 entries.
The ideal is I have a list which the use fills in, for sack of argument Goal 1, Goal 2, etc but I have a problem. This list which the user builds I want to appear in a combobox with is quite easy using the list function and naming the range.
The problem I have is that Goal 1 or 2 can be in this list more than once, if it is at all possible I want or would like the Combobox to only show Goal 1 once and not twice or how many times it occurs. I require the Combobox just to show all Goals once no matter how many time they occur.
I was wondering if you have similar values how you use formulae to return the first or the last value from a list?
I have attached an example and I was wondering if you guys could have a look at it?
I have a list of data which is not in any particular order....
View 9 Replies View RelatedI am trying to create a run balance sheet (see attached sheet). Column C has a list of job numbers, with column D showing the reqd quantities. Once the job is run, the qty is entered in column F and either a balance or the word complete returns in column H. My problem is, is that, when a job with a balance attached to it is re-run, that balance should be returned in Column D.
Ie 574361 has a total of 707 of which 320.4 was run, leaving a balance of 386.6.
When I type in 574361 again, I need column D (in the cell next to the job number)to automatically locate the last reported balance and return its value.
I have tried VLOOKUP and INDEX, but cannot get the thing to return.
how many accounts, and list the total on the bottom.
So, I have something like this:
10003722
10003722
10003722
10003722
10008981
10008981
10008981
10008981
10008981
10028163
10034527
I need the column next to it to show #1 next to 10003722 than jump to the next one and have 2 next to 10008981 and so on...
I want to count if cells in a specified range =yes then divide the range to get a total percentage of yes cells. I have a data validation list set up with the values: yes, no, n/a. I don't want the total percentage to change when using n/a.
View 9 Replies View RelatedI have one column with many numbers. Some have one dash and some have two.
Example:
123-123456-65
012-789546-1
98B12354-889
Is there a way that I can remove all characters after the last – (dash) in the number?
Example:
If number is 123-123456-65
Then 123-123456
If number is 98B12354-889
Then 98B12354
If someone could just lead me in a direction, I might be able to figure it out. However, my code is elementary and most of the time, I record macros and the play with the code until it does what I want.
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
I am trying to count the occurences of combinations within a range defined by contiguous cell values in one column. My problem lies with setting the value of variables that are queried within the defined range. My macro should;
1)Set ComboValue1 & ComboValue2 values to A1 & B1 cells values respectively
2)define range to be searched by how many contiguous values there are in column D
3)search column E for 2 figure combination (defined by A1 & B1). If present increment counter by 1 and add to column C (to be visible in worksheet). If no match carry on
4)define new range by next set of contiguous values in column C
5) step 3
6)when all possible contiguous ranges defined and searched from column c, perform again on next combination down columns A & B with refreshed occurence counter
7)finish when all combinations are searched for
Sub CountComboOccurence()
Dim ListCounter As String
Dim ProgCounter As String
Dim Counter As Integer
Dim ComboValue1 As String
Dim ComboValue2 As String
Dim Rng As Range
Application. ScreenUpdating = False
ListCounter = 0
ProgCounter = 0
Counter = 0
ComboValue1 = 0.......................
I have another challenging solve for a VBA macro. So here it goes, as I have become frustrated trying to make an array formula with no joy. On my sample worksheet provided below this is what I am trying to accomplish:
(Solution cells) B4:I4 looks to the (Combination cells) M5:R10 for a match
If a match is present then cell J4 gives a "win" ,
If no match then cell J4 gives a " lose ".
Next if a win is present in cell J4, then cell K4 looks for when the draw number that matches occurred on from cells A4:A10, then subtracts the two(e.g. solutions cells from combination cells) to give the actual " # of draws to a win ". If no win is present in cell J4, then the default is zero for cell K4
The formula would be copied down thru cells J4:K12
Please refer to sample worksheet attached so that you can understand more clearly of just what I'm trying to do.
I have a UDF for a lookup_occurrence formula (thanks to Dave), and I was wondering if it was possible to tweak the range it looks at with if statements.
I have a formula like this =Lookup_Occurence(B13, INDIRECT($N$5), 1,1,5) where N5 says exit card 1.
I need it to only look at a certain rows within exit card 1 depending on the value entered in I5.
If value I5 says Period_1 it will only look in rows 12:46.
If value I5 says Period_2 it will only look in rows 48:82 etc.
I believe I need to modify the xl look part of the code with if statements.
Below is the code. I am wondering if I can replace the xlLook line with nested if statements. If I5="Period_1 then rows 12:46" etc.
Function Lookup_Occurence(To_find, Table_array As Range, _
Look_in_col As Long, Offset_col, Occurrence As Long, _
Optional Case_sensitive As Boolean, Optional Part_cell_match As Boolean)
Dim lLoop As Long
Dim rFound As Range
Dim xlLook As XlLookAt
Dim lOcCheck As Long
If i have a list where the same name is repeated several times. Then I have filtered this, to create another list of all of the possible options in the original list - only unique records
Now i want to create a count for each time the names in the unique list are present in the original list.
I am trying to do up a summary for an attendance sheet that I have.
The problem is I have a number of values that could all qualify as a valid attendance marking and others I need to ignore
I have that list of value in a named range "Present" - Column G on the Lookups Sheet
And I have three sheets I need to add together
The layout of the three attendance sheets is directed so I can't mess with that - and we need uniformity across all the organisations that record attendances.
On the first sheet/tab I have entered some example markings - the "C" markings need to be ignored as they aren't in my list of valid values
The Summary sheet is still counting them as it is currently counting anything <>"".
I guess in short ... how doe I change <>"" to my named range "Present"
I have zipped the workbook as it is 445kb (as a result of some lots of conditional formatting and terrible layout)
to calculate the count of unique text values from a list based on condition.
I have 2 columns A & B. In column A, I have Yes or NO text and in column B, I have Client names.
I want to count a list of unique values from column B if it is Yes in column A.
I have to write a formula to do this task and will appreciate any expert help in solving this.
I'm new to the forum - I've done a search but cannot find the answer to my problem.
I work in a hospital and have a list of consultants who refer for a particular type of scan over a period of time.
Each time the consultant refers their name is added to a list so I get a list like this:
Dr Smith
Dr Smith
Dr Jones
Dr Smith
Dr Paeker
Dr Paeker
Dr Jones
etc...
I need is a way to list each unique value in a row and how many of each value is in said row. For example, in row B I have Alan Jones, Alan Smith, Alan Jones, Bobby Strong, Bobby Strong, Alan Jones, Alan Smith (in cells B1 - b7 respectively).
Desired output in B8 is somethign along the lines of Alan Jones (3), Alan Smith (2), Bobby Strong (2). I'm sure this is possible, but what's the easiest way to achive this. Additionally, my particular spreadsheet has 17 entries in each row and is possible to have 17 unique entries.