Countifs Function Using Dates And For Loops
Jul 14, 2014
I am trying to develop a For Loop that will do countifs functions based on the criteria in the For Loop. Part of the countifs criteria is determining which values in a range are within certain dates. I have isolated the month and year data and am looping with for loops through the years (outer loop) and months (inner loop). The issue that I am running in to is how to place the month and year into the countifs in VBA: month/year. When I do these calculations in the spreadsheet it is easy to write for one of the criterias: ">=1/2013", but trying to do that same formula with variables is become much more challenging.
How could I write a countifs that uses variables to do the same as ">=1/2013"? In essence: ">=monthCount/yearCount".
View 8 Replies
ADVERTISEMENT
Jun 13, 2014
I"m attempting to generate a report to show the number of occurrences for a particular product within a calendar month.
Data is stored on the first sheet, output is populated on a separate sheet. Seems simple enough, but getting the "month" out of the date, whilst referring to another sheet seems to be the sticking point.
2014/03/24 14:34:17
Product1
2014/03/24 13:45:51
Product2
[Code]....
View 7 Replies
View Related
Oct 4, 2013
I am trying to find out how many projects might be active as of a certain date.
I have a tab in excel that contains project data. For each project there is a "Start Date" and there might be an "End Date"
My question is, how do I count all the rows where the start date is Less than a given date and the end date is after a given date? The wrinkle is... if the end date is empty then obviously it should be counted as well (assuming the start date is still before the given date).
Here are the approaches I've used thus far:
=SUMPRODUCT(1*( AND(OR(RawMetrics!P:P > A2, RawMetrics!P:P = ""), RawMetrics!$O:$O < A2 )))
=COUNTIFS(RawMetrics!P:P,">"&Sheet1!A2,RawMetrics!O:O,"
View 4 Replies
View Related
Aug 24, 2008
I am using the COUNTIFS function. I can us it with simple criterias but unsure to go about this criteria.
I would only like to count the cells if the range in question is equal or greater than S3 but is equal or less than T3.
I don't know how to use the => signs.
View 9 Replies
View Related
Oct 23, 2012
I have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
View 6 Replies
View Related
May 27, 2014
I am trying to use a countifs function that counts all the instances where the year of the date is 2014. The dates are in date format like 3/13/2013, and contained in cells a2:a12
Here is my current formula which is not working out for me.
=countifs(year(A2:A12),2014)
View 3 Replies
View Related
Aug 3, 2013
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
View 1 Replies
View Related
Aug 11, 2014
I'm trying to develop a formula that can incorporate the search function in amongst a countifs formula. I have a column that contans the string "2.3 Manage Project Delivery" in a single cell. However, a single cell could also contain this text string in amongst other text and be in there multiple times - E.G; "2.1 Manage Customer Support, 2.3 Manage Project Delivery, 2.4 Close Program, 2.3 Manage Project Delivery" etc
My formula currently looks like this: =COUNTIFS('RDC Register'!$AW:$AW,"Not Overdue",'RDC Register'!$C:$C,"2.3 Manage Project Delivery") but it's not counting the cells that have 2.3 Manage Project Delivery in it more than once.
So basically I need to modify my formula to search for this text string in the cell and add all occurrences to the final count.
View 3 Replies
View Related
Feb 25, 2014
convert this equation into sumproduct function..??
=COUNTIFS($I3,">="&$AC$3,$I3,"<="&$AC$4)
View 6 Replies
View Related
Nov 11, 2008
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
View 4 Replies
View Related
Dec 2, 2008
I have the following formula in a sheet to record basketball stats that I am putting together.
=COUNTIFS('Running Game Log'!A:A,"=Jarod",'Running Game Log'!C:C,"=2 pt miss")
This formula counts from a list that is generated during in-game recording of stats & obviously counts the number of times "Jarod" misses a "2 pt shot".
My question is can the criteria "Jarod" refer to a value in a cell, rather than the specific name "Jarod" as I want to be able to change player names easily, rather than have to edit this formula every time.
View 7 Replies
View Related
Jul 13, 2012
I have yet run into another road block, which is stated below.
=SUM(COUNTIFS(AF20:AF111,{"*CoSale**","*Reo**"},AL20:AL111,{"Seller - Core","Seller - Non Core"}))
I can not get that formula to sum correctly. I can get them to sum if I seperate, but not with the countifs formula above. I am stuck at this point. So, any insight would be great. It is supposed to add up to 13, but I am getting a sum of 7.
REO-Svcr
Seller - Core
CoSale-Pri
Seller - Core
[Code]....
View 3 Replies
View Related
Oct 23, 2013
This is the function I have now: =COUNTIFS(Sheet1!A:A,Sheet2!A2,(Sheet1!E:E),"*") and it works great, counting every cell with a value in column E.
When I make criteria range 3 another column (criteria also being"*") my numbers actually start going down. I think it might be averaging the two columns out or something but I just want it to count all the cells with values in it from multiple columns and give me a total count.
I have 4 columns total that I want to be able to get a total count from.
View 3 Replies
View Related
Feb 3, 2009
I have a column titled "Start Date", "Month/Year", &"Total". I want to count the number of dates that appeared in the "start date" column that have the same month and year of the "month/year" column. That count should be in the total count. For ex, I want the first total (april 2008) to be 1, the second (may 2008) to be 1, and so on. I tried using countifs month and year of the start date is the month and year of the month/year column. Not working.
Here's my data: ....
View 9 Replies
View Related
Apr 14, 2014
I have multiple rows of data per each column. I'm trying to count rows that match a value that ISN'T any of the expected values in column A as well as a certain value in column G. This is in case future data is introduced that doesn't match the existing codes.
I'm trying to count all rows that DON'T have a value in column A beginning with PUA or P9V, so far I am trying this:
=COUNTIFS(A:A,"<>P9V*""<>PUA*",G:G,"P")
But it only seems to work on the "<>P9V" part. When I put P's in the column G of which the column A matches PUA*, it still counts the cell. I've tried a couple of AND variations but none are working.
View 2 Replies
View Related
Feb 26, 2014
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
=COUNTIFS('P12 Source'!H:H,A18,'P12 Source'!F:F,"Resolved,duplicate")
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
=COUNTIFS('P12 Source'!$H:$H,A19,'P12 Source'!$F:$F,'P12 Source'!$F$75)
View 8 Replies
View Related
Aug 13, 2013
I have a file with 3 sheets with Sales data. First sheet is for capturing Sales data, second sheet, with some Weekly Analysis and Monthly Analysis using COUNTIFS, third is charts based on second sheet's formulas.
When I use COUNTIFS function to capture the monthly sales nos, the working days in different months vary from each, obviously. Some months have 20 days, some with 21 days, some with 22/23 days. How to write a correct code for varying working days, because I have to capture only the working days in a month, and in THAT MONTH only, leaving all Sat days and Sun days?
My formula goes like this in cell E3 and I have attached my sample file as well.
=COUNTIFS(Master!$B$2:$B$5000,">="&$D$2-30,Master!$B$2:$B$5000,
"<="&$D$2,Master!$C$2:$C$5000,"="&$D3)
eg: If I want to measure Monthly Sales performance for a salesman, Date of Sales Performance measure will be done on the last WorkingDay/WeekDay of that month, in the month Sep-2013, Performance will be taken on 30-Sep-2013, till the 21 weekdays backwards. i.e. 02-Sep-2013. In the month of Aug or Feb the no of weekdays differs.
View 2 Replies
View Related
Aug 7, 2013
I have a problem where there are 4 arguments passed to my COUNTIFS function to give me a total count i.e. "KP","James Report","Completed","Month"
Here is the Formula I used;
=COUNTIFS(Master!$B$2:$B$29,Picklist!$C$8,Master!$D$2:$D$29,B3,Master!$H$2:$H$29,Picklist!$C$2,Master!K2:K57,Picklist!E9 )
The last part of my formula is throwing an error "K2:K57"
What I should get in plain English.... "The number of 'James Report' 'Completed by 'KP' in 'August'. (Any specified month based on what comes from my "dates field" on my Master sheet.
I have got a field in my Master sheet with dates which I have transposed into the right month of the year using Month().
View 2 Replies
View Related
May 27, 2014
How to use COUNTIFS Function only for the visible Data after applying filter.
Ex:=COUNTIFS(A:A,"Ret",P:P,"M")-COUNTIFS(A:A,"Ret",P:P,"M",B:B,"") it gives d result including hidden data, but i want it only for visible data after applying filter.
View 1 Replies
View Related
Apr 25, 2014
Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
View 1 Replies
View Related
Apr 1, 2014
I want to write a function which will calculate whether a certificat needs renewing TODAY or not. The validity of certificate is 12 months.
HTML Code:
A B C D
type of cert date test done valid or not?
fire 01/01/10
test 01/03/14
health and safety 01/03/14
asbesto 1/03/05
gas 05/05/05
electricity 01/06/13
validity 12 months
View 3 Replies
View Related
Jun 13, 2006
The worksheet will have a list of staff and the date they sat for a particular test. I need to be able to highlight in some way when for example 6 weeks has passed so that the staff member can be re-tested.
We want to be able to open this worksheet and see immediately any staff who are overdue for a retest. If they have undertaken such retesting we obviously don't want to see them red flagged or whatever any more.
View 9 Replies
View Related
Dec 5, 2013
I want to make a calculation on a spreadsheet only if the date is a Friday. (weekly returns calculation) I can't seem to find out how to test the date to see if it is a Friday.
View 7 Replies
View Related
Feb 17, 2012
Suppose you have a dates mix in column A with year-month-day format, for example:
ABC12012-04-27Call to the Doctor at 9am
22012-05-13Chicago Concert
32012-04-14Buy ticket to theater
42012-05-03Take children to match
52012-04-07George birthday
62012-04-21Bring the car to inspection
7
And in Column C you want to get the first or the third date of a month, for example for April
View 2 Replies
View Related
Apr 13, 2007
how can i make a loop throught the G colum and to check if the cell before the currect is bigger/ lower or equal to the currect cell. and if its higher then an arrow will be shown '^' if its lower an upside down arrow will be show 'v'
equal will show -> arrow. example:
G2 = 200
G3 = ^ 300
G4 = -> 300
G5 = v 209
so how can i change the G3 to G4 G5 etc.. in a loop in the: Range("G3").Select command? and i need to change the
.Value = "=$G$2"
to
Value = "=$G$3"
Value = "=$G$4"
etc...
in 2 places................
View 4 Replies
View Related
Jun 23, 2012
Query below
Date
Sales
1/7/2011
500
2/7/2011
600
[Code] ........
I was given the above table in an interview and was asked to find the sum between two dates without using sum and sumproduct.
View 3 Replies
View Related
Oct 18, 2008
Get the number of workdays between two dates in a VBA function. I tried simply using the Advanced Toolpak function NETWORKDAYS, but I get the error message "Sub or function not defined". I did reference to atpvbaen.xls in the Tools > References menu, so I don't know why Excel is not recognizing the function.
I used the following function to test it:
Function CalcNetDays(dInitial As Date, dEnd As Date)
CalcNetDays = NetworkDays(dInitial, dEnd)
End Function
Any reason the function is not working?
Also, I need to add the holidays to the function. The holidays are listed on a worksheet column. Do I simply add the range to the function, like below?
CalcNetDays = NetworkDays(dInitial, dEnd, Range("Holidays"))
View 9 Replies
View Related
Oct 18, 2008
i have this code that upon opening of workboot it generates the next number thats available on sheet 2 i then enter the data that i need to and click the button it then transfers to sheet2 and prints 2 copies and then clears the cells that i have input data to
what i really need it to do is exactly as it does right now but to then change the next number available to what it is ....
View 14 Replies
View Related
Aug 11, 2009
I seem to be having trouble creating a nested loop. It seemed simple enough in my brain holder, however, in real life...Well I am here aren't I. Here is my
View 2 Replies
View Related
Aug 20, 2009
First of all, I'm completely new to both this forum and VBA. I have just done a programming course in java before. I hope you will forgive me if this have already been posted. No to my problem.
I am tryring to use different projected values to project other subparts of those units, which is done in the sheet mean needed weekly. Tje values are taken from projections. The answer that I get from mean needed weekly should be copied to a third sheet.
This is the code that I am using right know, but I cant get the for loop to work (or more exactly to be able to place the "i" in my text without making compilation errors).
View 9 Replies
View Related