I have created in VBA a formula to look for the last empty cell in the "SBV INFO" sheet and it works.
I now need the VBA to go the the DCWC sheet and only extract the data and amounts from Columns K and M where there is a value more than "0" in column M.
The the data in Column K where the value in Column M is more than "0" must go to the first empty sell (found in the SBV INFO sheet) as per the VBA and the corresponding amount in Column M must go to Column AA (also in the SBV INFO sheet)
In other words from the attachement I need the following:
Column M in SBV INFO sheet 1st empty cell (this will vary which is why i did the formula)
SBV DURBAN WHL
SBV George RET
SBV PEW WHL
Column AA
237,030.00
248,000.00
150,000.00
This might change in future. which means I would have to be able to transfer 1 to 15 of these names and amounts depending on the value in Column M from the "DCWC" sheet.
I have a short VBA program that either outputs a number to the cell or nothing. Now, the problem is that for it to output nothing to the cell ie. give the appearence of a empty cell i just write [program name] = "". However I want to be able to multiply my cell with other cells and this generates an error when I have "" in the cell. If I instead output a zero to the cell it works fine, but I dont want a zero, I want empty cells.... for estetic purposes.
Im trying to find a formula that when a cell is empty ie this cell is linked to another cell on another worksheet and info has not been entered or is 0 then i want the cell to display the the current date ie =NOW()
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004' Application-defined or object-defined error
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1 2) Paste value into next empty cell in column A (Rows build as students are inputted) 3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
I'm using Excel 2003 and have a main workbook which stores the quotes, invoice, worksheet and contact details. In order to email only the invoice to a customer I have created another workbook which replicates whatever is shown in the open invoice tab of the main workbook. A macro from the main workbook then opens outlook.
I attach a sample of both for information. My problem is this - You will note that on the email invoice that any entries where there is no cost in the main workbook, that it shows "£ -". how to get it to show an empty cell if no value in the main workbook?
I have searched around and cannot find exactly what im looking for. I have a table of data and want to delete it all by clicking a button. I only want it to delete the rows which have data in.
Example A1 = Apple A2 = Apple1 A3 = Apple2 A4 = Apple3 A5 = *Empty*
I have an excel sheet with a few columns, Column (1) has data entered for ever row (with a name.) Column (2) has a few random cells with data (names) about 30% and the rest are left blank. What I need, is to have a formula in a new column (3) that will put in the the data (names) of column (2) and then if there isnt data in column (2) then it will put the Data (names) from column (1). (ps, If i cant get this figured out, we have to buy a custom interface and it will cost around $7000,)
I am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9. The next 'block' of data starts at row 10 and finishes at row 18. Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I'm using Excel 2002 and am having trouble with what I thought was a simple conditional command. On part of the spreadsheet I have 3 columns: Hours (D5), Cost Per Hour (E5) and Total Cost (F5). Here's what I'm trying to do.....
If there is no value in the Hours then the Total Cost should show an empty cell and conversly if there is a value in Hours then calculate Hours*Cost Per Hour in the Total Cost cell. My condition for cell F5 is as follows: =IF(D5="","",SUM(D5*E5)). Whilst it works if there is a value in D5, when empty F5 shows #VALUE!
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()] ' ' CopyData Macro ' Copy The Data To Build Graph '
I have a Rental Form that i'm working on, and to tidy things up when I print it out, I would like to move a cells data down 1 row if that cell is empty. Here's what I have:
cell b8 - First and Last Name cell b9 - Address1 cell B10 - Address2 cell b11 - City, State, Zip cell 12 - Phone # etc.
Not too many people have an address2, so when that field is empty, I'd like to move Address1's data down to it's position (address2). If address2 has data in it, leave address1 where it is. Simple right? This moving would happen when the command button is hit and the form data goes to sheet 1 which works fine.
I'm looking for a formula which will enable typing (in cell A1) positive numbers between 0-1000000 but will prevent the user from leaving that cell in an empty state. Empty cell means: cell with space(s) or deleting the legitimate value that is, already, in it).
I must emphasize that I know how to handle this by VBA code and/or by using a "named" pre-defined list of values + un-checking the "ignore empty cell" option - but I would like to know, once and for all, the solution WITHOUT using Macro and/or 'List' (if any..)
I want to extract first data from column Name where in the data corresponding to it in Column Marks is blank, and if that is filled, i want the next data to be shown automatically
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data. Sub movedata()
Range("A1:H1").Select Selection.Copy Sheets("Sheet2").Select ActiveSheet.Paste Sheets("Sheet1").Select Application.CutCopyMode = False Selection.Delete Shift:=xlUp Range("A1").Select Sheets("Sheet2").Select Rows("1:1").Select Selection.Insert Shift:=xlDown Range("A1").Select Sheets("Sheet1").Select End Sub
I'm creating a "universal-fluctuating" vendor inventory return worksheet for a auto parts store that consist of one criteria (cores, warranties, or N/R ) and will return one or two results of core cost and/or unit cost. This part of the task I have accomplished by using a drop down list for my criteria and my results will appear in two different columns using a Vlookup table. The problem is due to inventory fluctuating from cores and waranties on a month by month basis, vendor requiremnts differ for the number of units returned, and last make the boss happy on ink and papers supplies :D I was wondering if it is possible loop my code in a given column where it will move my code to the next row untill I reach a grand total?
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 - A10, - In workbook2, in Range G10- G13: find the word "Day1". - If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy the particular cell or cells where "Day1" exists to the first found empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means A8 is the first empty cell. And G10,G11,G12, G13 (workbook2) have the word "Day1" Then, Copy cell G10 into cell A8 Copy cell G11 into cell A9 Copy cell G12 into cell A10
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc. I'm not sure if this is the way to go
Sub CopyRows() Worksheets("sheet1").Select FinalRow = Range("M65536").End(xlUp).Row ' Find the last row of data ' Loop through each row For x = 2 To FinalRow ' Decide if to copy based on column M ThisValue = Range("M" & x).Value ' could be any value If ThisValue = "yes" Then Worksheets("sheet2").Range("A" & x & ":L" & x).Copy Worksheets("sheet1").Select NextRow = Range("A65536").End(xlUp).Row + 1 Range("A" & NextRow).Select ActiveSheet.PasteSpecial = xlValues Worksheets("sheet1").Select End If Next x End Sub
I have a table that I use to generate about 20 graphs. The lower and upper limits can be manually altered in the table. If the user leave those 2 cells empty, I want the upper and lower limits be determined by default by Excel. So that the limits don't have to be entered for every graph in order for the graphs to be generated without any debugging error.
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
I am a novice user and not very familiar with Macros or VBA. I took a macro I found on contextures and got it to resize comments that already exist. However, I am trying to get it to also create the comment (with no content) if the comment does not already exist, and then resize it. This is what I have so far:
Code: Sub ResizeCommentsInSelection() Dim mycell As Range Dim myRng As Range Dim lArea As Long Set myRng = Selection
