Create Cutomer Account Or Information Entering Area? Link To Access?
Jan 27, 2008How to create an area in excel where by if a customer enters an account number all of their account details would be automatically entered into the address fields?
ADVERTISEMENT
Complex If Statement To Calculate Date Range From Create Account To Stop Account
Sep 7, 2012Creating a formula that basically has a big IF statement. I hope this makes sense, so here goes. I am looking to find the "age" or "elapsed days" of an ID from when they created an account to when they stopped. This might be very complex and if there's not a way to calculate the Elapsed days (even though that's what I prefer), perhaps there is some formula that can return a value like a "1" or "True" or something that lets me know the statement is true.
original formula from post 3261273
{=IF(D2>0,A2-INDEX(A$2:D$16,MATCH(B2&"1",B$2:B$16&C$2:C$16,0),1),"")}
New formulas needed or revised from the above:
Formula 1: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Create to Suspend but NO Stopped)
Formula 2: If the ID in column 2 are the same, and if there is a value in column 3 (Create) and a value in Column 4 (Suspend) AND there is no value in Column 5 (Stopped) OR Column 6 (Unsuspend), then subtract the dates in column 1 for Create and Suspend. My manual calculation result is in the column called "Elapsed Days (Suspend Only, No stopped or Unsuspend)"
Formula 3: The ID in column 2 does not have to be the same, but if there is a value in column 3 only (Create) and there is no value in the Suspend, Stopped, or Unsuspend columns, then place a "1" in the cell. My manual calc is the "Create Only" column.
Event Date
ID
CREATE
Suspend
STOPPED
Unsuspend
Elapsed Days (Create to Suspend but NO Stopped)
Elapsed Days (Suspend Only, No stopped or Unsuspend)
[Code] .........
Excel 2010 :: Create Checkbox That When Ticked Shows Additional Area To Input Information?
Jan 10, 2014I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
Entering Formula- Data Imported From Access And Saved As A Worksheet
Dec 7, 2007I have a workbook with just one worksheet. It's just a list of data imported from Access and saved as a worksheet. When I try to enter a formula ie '=4+4' it goes in as text and will not calculate. I have tried various formatting to no avail. I added a second worksheet to see what happens and this works fine. (XP home, Excel 2003).
View 12 Replies View RelatedFormula That Will Get Word To Appear After Entering All Information?
Aug 8, 2014I have been looking for a forumla that will put an 'and' between the last two bits of information.
Joe Bloggs
Peter Smith
Matt Jones
I have list of names in individual cells like above. I have figured out a formula that will put them into a single line (Joe Bloggs, Peter Smith, Matt Jones). But what I need is a formula that will put it into single line and insert an 'and' ALWAYS between the last two people. So it should show like (Joe Bloggs, Peter Smith and Matt Jones) but if I remove Matt Jones it should now display as (Joe Bloggs and Peter Smith).
Taking Information From Textbox From One Workbook And Entering It In Another
Jan 9, 2014I have 2 separate workbooks that are linked together and work in tandem. One is the Master Workbook "Master Business Plan Worksheet For Sale.xlsm" and the other is the one containing all the Menu Items for the business "Menu Items Workbook.xlsm"
I have a Master Recipe Sheet that I created in the Master Workbook and made sure it all works. Now I have copied it to the Menu Items workbook and copied all the Userforms and created Macros for it but I need setting up the references to the other sheet. I have included the code from the first sheet for you to look over. The textboxes all need to populate to the Master Workbook and all the info for the combo boxes are also in the Master Workbook.
Code:
Private Sub UserForm_Initialize()
'Populate Measurement combo box.
Dim rngMeasurement As Range
Dim ws As Worksheet
Set ws = Worksheets("Start Here Sheet")
For Each rngMeasurement In ws.Range("Sizes_List")
[Code] .....
Formula That Uses Link In A Cell To Create Offset Link
Jun 28, 2013I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
Create Ledger Account Based On Cashbook?
Mar 16, 2014I want to create leger accounts In cashbook there is account head (ex. Hand Loan A/c, Salary A/c, Exam A/c and so on)
View 2 Replies View RelatedCreate Ledger Account In Multiple Sheets?
Mar 13, 2014I have CASHBOOK Worksheet and I want to create a LEDGER Account in Multiple sheet
View 2 Replies View RelatedRemove Print Area Link?
Mar 18, 2013I have a workbook with macro code which creates another workbook and then copies the formatting from the active sheet to the new workbook (single sheet). Once the formatting has been copied, the new workbook has a print area reference to a separate worksheet in the original workbook.
I have tried clearing the print area using the button on the Page Layout ribbon, but it has no effect. If I check links I find a link to the original workbook.
The only way I have found to break this link is to add a new print area on the new workbook. This does not remove the earlier print area reference, but it does break the link.
I find this all rather bizzare. No doubt there is a perfectly rational explanation. What I would like is some code that will remove this reference to the unrelated worksheet in the original workbook.
Link With Access Database
Mar 29, 2007I have an excel database which has some very basic formulas to multiply some numbers then divide them, the number are manually entered into the cells by myself, however I am getting these number from an MS Access DB manually copy and paste so I wondered, can I make excel automatically pull the number from the access database and if so where do I start?
View 4 Replies View RelatedUsing VBA To Access Information In SQL
May 29, 2009I need to compare data on a spreadsheet to data that resides in SQL database. I have never done this before so before I start I wanted to ask a general question, what is the cleanest, simplest, way to go about this. I read that ADO is a good way to access SQL. I understand that ADO is one of the main components of MS universal data access specifications so it sounds like the right approach (and that ADO is replacing DAO).
In terms of application, all I want to do for now is pull data from SQL and write it to a worksheet in the Excel workbook. Other macro's will then operate on this data. Later I will want to write data back to SQL but I want to focus on the "get" part first. Are the statements SELECT; INSERT; UPDATE; DELETE examples of ADO coding?
Conceptually, the SQL team provide nightly tables of data; ADO retrieves some of that data by selecting it; The selected data is written to a worksheet within the workbook. Is this a good approach?
Link Excel And Access Through Macro
Mar 16, 2014I have a large excel file with lots of data that it takes a long time to manipulate in excel. What I would like to do, is to import it in access, do some manipulations, and export it in excel again.
All these have to be automatic, so that the user does not do anything. Is it possible to do so through some macro?
Link Sheets To Access Tables
Jun 28, 2007Is it possible to somehow link sheets in excel to different tables in Access so when I update the sheets in excel it can automatically update the tables in access?
Doesn't have to be on line but I want to avoid the continous copy paste or exporting and trying to automate this process.
Add The Information Into Access Database
Dec 17, 2009I just wanted to know if there was a way to add the information contained within an excel form into an access database using a macro? What I am looking to do is automatically have the data added when I press a button, or when I close a worksheet.
View 14 Replies View RelatedMapping Account . How To Add Additional Data In To Account#
Aug 21, 2009I have two sheets. First contains Department # 0002549, and the other one contains 5 more digits(#02001 0002549). I will need to find the exact match for the first sheet to contain all 12 digits. THey are all in different order, so I probably have to match them first then add whatever the first 5 digits number. How should I tackle this issue? I was thinking to use vlookup but how could you use vlook up if only last 7 digit matches and add addtional digits to exisiting number?
View 9 Replies View RelatedCreate A New Tab When Entering Value Into A Cell
Mar 16, 2007What I'm trying to do is enter a value/text into a cell - say (A1). After I enter the value/text I would like to have a new tab populated with all the information on the current sheet and the tab name referencing cell A1. I tried running a few different scenarios using macros and have come up short. I want to be able to do this multiple times with different values/text. For example if I enter B606123 into cell A1 I want a tab to be created named B606123. Then later I might want to add B606096 and have that created without effecting B606123.
View 3 Replies View RelatedMacro To Link Information Between Two Worksheets?
Jul 11, 2012I need to link information between two sheets.
In Sheet2 I have a list of products with their description in adjacent columns such as prices and other information. Sheet1 is a MasterSheet of some of the products listed in Sheet2. So I would like to write a macro that links the information of the product from Sheet2 to Sheet1 if I type the products name in Sheet1 (MasterSheet). The list of products (Sheet2) is updated in a regular basis, so by linking the info I would just need to update Sheet2 and Sheet1 would update as well.
Can Capture Link Information Via Web Query
Nov 27, 2012I've used queries for years so I know how they work, for the most part...copying data from the source and spitting it into a spread
What I am looking to do is copy the actual link information from a web page when I query that page.
In other words, there are links on a page I'm querying and I'd like not only the displaying text link, but the underlying link itself.
Example: I have a link to a project being done and query the page the project information is on. But I'd also like to later get information on the companies associated with that project. A link to the company information is on the project page.
Is there a way to extract this information via a query? Or is it going to take a php script served online or something...
Link Drop Down List & Lookup Corresponding Information
Apr 25, 2008I'm trying to categorise a load of expenses against their appropriate budget and sub-budgets. I've got all the budget subcategories in separate dynamic named lists each headed by the main budget name. I want to be able to select the main budget name e.g. marketing or sales etc and then see, in the next column over, only the appropriate subcategories to select from e.g pick the appropriate dynamic list (I've used dynamic lists so I have some flexibility to add new categories at a leter date).
View 2 Replies View RelatedLink Excel To Another Program - Only Showing Data / Information When Needed
Jul 3, 2014However, I have got an Excel file which contains a lot of information. There are four sheets with large Pivot Tables.
But the thing is, the plan is to do the tables much larger, create tables which more specifically shows information. When doing so, the tables will show much more information, and therefore be much larger. It will be difficult to read and understand the tables because of the large amount of information.
What I want is to store information in, for example, another program such as Microsoft Access. There, I can put a huge amount of information and then link it to Excel, so that in Excel I only see the Access stored information when I "search" for it with y created slicers. Like, when I use my slicers and click on one category it sort out and shows me the information i want, even though it's stored in Access. It only shows it in Excel when I "ask" for it. This is what I have thought.
Macro To Create A Dialog Box For Entering And Updating Drop Down List?
Oct 31, 2013This is what I'm trying to do:
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
Excel 2010 :: File Sharing - Link 4 Spreadsheets Where Information Will Be Updated By One Person
Apr 21, 2013I have a Excel Spread Sheet which has been created, there will be 4 people in 4 different locations who will have access to this spreadsheet and will need to update/amend it through "Dropbox", my question/problem is, how can I link the 4 spreadsheets where information will be updated by one person, but will update all 4 sheets at the same time.
Is this possible and how do I go about it?
Create Interpolation For Water Flow In Given Area
May 29, 2014I am trying to create an interpolation for water flow in a given area. Tables below for better understanding:
Inputs Required
Area
3
km2
L
5
km
L2/A (Calculated)
8.3
[Code] ......
The idea is that when I increase the input area, I would like to interpolate between the RFFP frequency for the flow Q50/Q20 that best fits the area and provide me with a peak flow rate.
Create Document With 3 And 4 Columns That Occupy Same Sized Area?
Apr 30, 2014One of my coworkers is trying to create a document that has 3 columns in one part of the spreadsheet, but further down on the page, he needs to have 4 columns but wants them to use the same amount of space as the three columns. I have looked around and don't see how that is possible.
View 2 Replies View RelatedCreate User Settable Print Area With Dynamic Ranges
Jan 29, 2007Once a user of my workbook has input various price levels on the Input Page, the data is sorted on the output page. As the data on the Output Page is quite vast and not all of it is relevant on a particular day, the user is interested in just printing a certain range of data that are in 5 columns. I am trying to figure out how to set up a macro that will allow the user to enter into an Input Box the range to print (ie. Cells C25:G60).
I found one example on this site listed below that allows one to do that but I would like to make it more user friendly. I do not want to make the user have to write out Excel cooridinates. Specifically by allowing the user to input in the Input Box a High price level in Column C and a Low Price level in Column C ; The macro will look in Column C for the highest instance of this High Price and begin the range down to the last instance of the Low Price (there can be several instances of the exact price level.) The macro would then create the print preview of the cells Cxx:Gyy.
Sub SelectPrintArea()
Dim PrintThis As Range
ActiveSheet.PageSetup.PrintArea = ""
Set PrintThis = Application.InputBox _
(Prompt:="Select the Print Range", Title:="Select", Type:=8)
PrintThis.Select
Selection.Name = "NewPrint"
ActiveSheet.PageSetup.PrintArea = "NewPrint"
ActiveSheet.PrintPreview
End Sub
Create Password For Permenent Access
Jan 25, 2008Is it possible to create a password for a user to have permanent, unrestricted access and not not be prompted for a password again?
View 9 Replies View RelatedCreate Macros To Print Area With Data Using Different Cell Format To Fit In One Page?
Feb 6, 2014I have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print()
'
' Set_Print Macro
' set printing area and print
[Code]......
How To Create A Link To Another Worksheet
Jan 30, 2014im currently working on contact details for each of our client. Attached here is the sample worksheet im currently working on. As the title suggest is it possible if i click the company name i will be directed to its contact details on the other sheet?we need a worksheet that functions like this: if we click the company name, it will direct the user to its contact details or will display ONLY its contact details.
View 14 Replies View RelatedCreate Macro For DDE Link
Apr 5, 2006I am using an excel add-in to create a DDE link between a market data provider and my spreadsheet. ( Add-in is called SigTools.xla )
DDE link works fine and target cells are updated dynamically as market data changes so my excel sheet values are changing constantly.
The formula =WinRos|LAST!GOOG will update target cell with most recent market prtice for Google.
Since this formula is not an excel formula I can't reference excel cells with formula - ie =WinRos|LAST!Indirect&A3 or anything like this won't work.
I thought a Macro might work to simulate "typing in correct formula" and I created following Macro which I thought would work but unfortunately it does not.
Sub Macro2()
'
Dim strSymb As String
strSymb = Cells(4, 1).Value
Application.Goto Reference:="TargetCell"
ActiveCell.FormulaR1C1 = "=WinRos|LAST! & strSymb & "
End Sub
The idea was that Macro would behave just as if I typed in =WinRos|LAST! & strSymb & and substituted the symbol name contained in Cells(4, 1) - whatever that happenned to be.
Seems reasonable but I get an error "Application-defined or object-defined error"
Alternatively I could re-type the formula each time but it would be much better to somehow reference a specific symbol in a particular cell via functioning Macro.