I am trying to take data from one spreadsheet and do a couple of things. First, i need to create a tab for each column and name the tab after the name in row 1. (this code i already have, it is below)
Second, and here is where i need help, i want to put the tab name and corresponding data (all in the same column on the first sheet) onto each tab. Essentially i am just divying up each column on my master sheet into its own tab so that i can do further data analysis.
Sub GenWStabnames2()
'Kemper Ohlmeyer based on code from David McRitchie
Dim cell As Range
Dim newName As String, xx As String
Err.Description = ""
On Error Resume Next
'--cells with numbers, including dates, will be ignored,
For Each cell In Worksheets("Manager list").Range("fund.names")................
I am trying to create a master list in a new sheet based on the data contained in 4 separate tabs. The data is Username, Display Name, Company. Unfortunately some users have accounts in 2 of the companies (with the same username) and I need these to default to Company A.
The output need to be username, Display Name, Company.
I am trying to populate a large data table with data sourced from multiple tabs.
Each of the tabs is, for the most part uniform.
They have column labels of "Invoice Number", "Schedule Dates," and "Amount". Their cell references are A6, B6, and C6, respectively.
Is there any way to congregate this data into one massive data table? It doesn't matter the order of the data table. I will be using sort/sumifs/pivot tables to analyze the data.
I cannot copy and paste as there is too much data that changes on a daily basis.
I am using a excel 97 and have a macro that generated hundreds of work books on a single run. Due to the extensive number of work books, i would like to save all of this into a single folder. I able to create a folder on my macro by using the "MKDIR" command, however I can not seem to save any of my workbooks on that newly created folder, do i have to release that folder first. I get a message saying "Miscrosoft Office Excel cannot access the file (Folder).
The command i am using to save the files: ActiveWorkbook.SaveAs Filename:=Output_Name, _ FileFormat:=xlNormal
The Output_Name contains the full path including the new folder name and the workbook name. What do you think i am doing wrong or not doing at all?
creating / populating a table. In the table below, the left half is the data I currently have. I need to wiggle it around to look like J10.
Basically, I need a formula that I can plug into every cell in Column J that says at the value to the immediate left in Column I. Take this value and look at Column E... then every time there is match, take the value in Column D, and find the next match. Put pipes between each value.
Basically, I am trying to get a row for each parent ID that has all the children in one cell delineated by pipes. I am trying to get a row for each parent ID that has all the children in one cell delineated by pipes.
I have just started out learning vb and am having some trouble with a particular request. The following code is code I found to split a worksheet into different sheets based on a variable in the data (Col G). It has now been requested that instead of new worksheets, they want the data in new work books, automatically named and saved as today's date.
Sub UpDate_Sheets() Dim ws As Worksheet, source As Range, dest As Range Dim daily As Worksheet Set daily = Worksheets("Sheet1") Application. ScreenUpdating = False On Error Resume Next For Each ws In Worksheets If ws.Name <> daily.Name Then daily.Range("G1"). AutoFilter Field:=7, Criteria1:=ws.Name Set source = daily.Range("G1"). CurrentRegion.Offset(1, 0).SpecialCells(xlVisible) Set dest = Worksheets(ws.Name).Range("A65536").End(xlUp).Offset(1, 0) source.Copy dest End If Next daily.Range("G1").AutoFilter On Error Goto 0 End Sub
I am trying to create a formula by comparing data in columns on a separate tab.
Basically, I want to take the value of one cell in the primary tab, find the matching value in a column on another tab, then once it is matched, pull in the data from another cell in the second tab on the same row of the matched data.
I am sure the answer to this is out there somewhere but I haven't been able to find it. Thank you in advance for the help - I just can't figure it out.
I have several identically formatted worksheets (for different departments) with macros that reorganize the data in each sheet. I also have a list of managers with their respective departments in this same workbook.
I want a macro that will save these department sheets (values and formats only) in new workbooks - the manager's name - according to the list. I also need the macros that reorganize the data to work without referencing the original file.
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
I have built a Userform that is for a Liquor Inventory. I would like to scan each bottle's UPC Code and pull it from a range list that is set up in (Combobox "UpcBarCodeBox"). That information is stored on a sheet "Liquor & Wine Inventory" in Column "A" (Unsorted). Column "B" is the name of the liquor which is also the column that everything is sorted in alphabetical order. What I would like to do is populate several textbox's that I have set up so that I can input missing data or data that needs to be updated. The problem is I would LOVE to keep the list sorted by Liquor Names (Column "B") and not by UPC Bar Codes (Column "A"). From my research I have found that Index and Match might be the way to go but I can't seem to get it to work right. Since I am still learning VBA, Some things still escape my grasp.
VB:
Private Sub UserForm_Initialize() Me.UpcBarCodeBox.List = Worksheets("Liquor & Wine Inventory").Range("A5:A205").Value With ComboBox2
I have built a Userform that is for a Liquor Inventory. I would like to scan each bottle's UPC Code and pull it from a range list that is set up in (Combobox "UpcCodeBox"). That information is stored on a sheet "Liquor & Wine Inventory" in Column "A" (Unsorted). Column "B" is the name of the liquor which is also the column that everything is sorted in alphabetical order. What I would like to do is populate several textbox's that I have set up so that I can input missing data or data that needs to be updated. The problem is I would LOVE to keep the list sorted by Liquor Names (Column "B") and not by UPC Bar Codes (Column "A"). From my research I have found that Index and Match might be the way to go but I can't seem to get it to work right.
Code:
Private Sub UserForm_Initialize() Me.UpcBarCodeBox.List = Worksheets("Liquor & Wine Inventory").Range("A5:A205").Value With ComboBox2 .AddItem "0" .AddItem "1" .AddItem "2" .AddItem "3"
I am using the form control data validation drop down list with 9 entries in the list. How can I get the entry that is selected in the drop down list to populate exactly into another cell on a separte worksheet? I have linked the drop down list to the cell, but the value is populating as a number rather than the text entry that is in the drop down.
I have Columns A:D with a heading at the top. the user can then type organisation names under the correct column. There is a maximum of 30 entries (rows 2:32).
Problem One: Column E is a hidden column and I need cells E2 and downwards to be a list which gets populated by ALL the organisation names inserted into $A$2:$D$32. I don't want there to be any blank cells until the last entry in column E (if that makes sense). how to populate this list?
Problem Two: At another part of the worksheet, I have five cell where the user has to select from a list. The five cells correspond to the lists in columns A:E. Is there any way to avoid having blank options in a list using data validation (say if the user has not entered 30 organisations into one of the columns)?
I have created a checklist using "Marlett" checkboxes. I have the names of choices in column B the Checkboxes in column C. In another sheet I want to populate only the names of the choices chosen without any of the spaces that a traditional if statement would populate if it was copied down a column.
I want to populate a Data Validation based on values in another cell on another worksheet--but, I want to populate it with the values stored in the cell right next to the cell. http://i32.photobucket.com/albums/d3...n/untitled.jpg. would be an example....
What I want my Data Validation List to do is to look at column B and wherever it sees a certain color--for example, red, I want it to put the corresponding value in column A in the list.
I have a workbook that contains data on a different sheet that I would like to populate on a different sheet by selecting a value from a drop down list. The format of the data is identical just different numbers. But are broken out into different projects... I am incredibly new at this and just barely learned how to make a drop down list.
I have two coworkers who input a list of times spent throughout the week into a basic 5x5 grid (daysof the week x 5 employees) into their own seperate workbooks. I then take those workbooks and copy and paste them on to my own master work book. Is there any way to get their data to auto populate on to my spreadsheet?
i have generated a list of "Companies on the ASX" (Australian Stock Exchange)
There are several work sheets (all populated from data queries) of companies within different sectors e.g all companies within the "energy" sector and so on (one sheet for each sector)
i am trying to populate a master list of all the companies from all of the sectors however there are some conditions i am having trouble meeting...
1. it has to reflect the exact data on the "sector page" after the Query has been refreshed.
2. i have left some formated rows to allow for new listings as the Query updates so i need it to copy each company from each page, something like..
"Energy" Copy A2:K2 - A5000:K5000 (stopping at row 2500 if that is where the last company is on that list, then the same for the next sheet.)
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
I'm working on a workbook with several names for every month and I'd like to populate the names from the different worksheets to have a list in another worksheet to make a summary avoiding duplicates and making sure every name is captured.
I have attached a sample sheet....populate_2013.xlsx
I am using windows 7, excel 2010 I have a work book, my price list is sheet one and my list of customers and what discounts they get per item in sheet 2.
I choose customer on sheet 1, say i choose a & L sales, well on sheet 2 it shows they get a discount of 45 percent. so I want the 45 percent to show in cell 4r on sheet one, but if the dropdown box shows customer a & V it should show 35 percent because that is what it is on sheet two in cell 3c.
sheet two has 158 customers and each get a difference discount for that product
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
I would like to be able to compare the "standards" in Column A with the Assessment status in Column B and the Assessment period in Column C in order to generate a compact list in another workbook (ideally) or tab (if not). A list might typically contain all the standards that have been M (mastered) during a given Assessment period. I realize that filters would achieve this to a large extent but I was hoping to automatically populate another worksheet or tab.
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
I have in column M ( starting at M2 and going through to M273 ) a list of names I wish to have new Tabs automatically made for.
There are some cells in this column that are blank and therefore have no name.
I need each new Tab to be a copy of a template sheet called 'DataTemplate'.
I am currently using the following formula, and I have it pasted in the sheet code of the worksheet where the list is found ....
Sub test() Dim r As Range On Error Resume Next For Each r In Range("m2", Range("m" & Rows.Count).End(xlUp)) If r.Value "" Then Application.DisplayAlerts = False Sheets(r.Value).Delete Application.DisplayAlerts = True Sheets.Add.Name = r.Value End If Next r End Sub
However, the new Tabs are not being generated. I've tried saving the file, exiting and coming back in, but still no new Tabs.
I have a large list of names that I am breaking into three groups based on last name (A-G, H-M, and N-Z). The spreadsheet is then sent to a group of processors who work on the names that are found on their tab.
I start out with the complete list on each tab. Then I use a For Next loop to go through each tab and delete the rows for the names that do not below on that tab. This process is working fine, but I am figuring their is a better method of doing it.
Code: Sub PopShts() Dim wsAG As Worksheet, wsHM As Worksheet, wsNZ As Worksheet Dim lRow As Long
I have a list of pairs of 406 pairs of currencies like the list below and I need to create a tab for each one of them and will take ages to do it manually, I am looking for a macro that can do it.
I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
