Duplicate Headings Down Each Data Group
Mar 26, 2008
I am trying to copy/paste header data into corresponding rows. A1 and A2 have the header information and need to be placed in the corresponding rows under columns A and B. I have been doing this manually and it is very time consuming since there are roughly 2000 rows. I believe a macro can accomplish this task but unsure how to create it. I was also unable to find any similar threads. I have attached a sample workbook. The original tab has the imported information and the Finished tab has what I would like the data to look like.
View 3 Replies
ADVERTISEMENT
Jan 4, 2007
I just came across an error in one of my workbooks where I had duplicate headers on a few columns
So When I used AdvancedFilter to " cut" the data into several workbooks for end users, the data in the first column was pasted 2x and the second columns was ignored altogether.
Headers since changed and that fixed the problem.
I'm just curious why the second column was ignored altogether
View 4 Replies
View Related
Jan 12, 2014
Conditional formatting. I want to change the color of a group of cells based on data in another group of cells. Example:
If cells G8 and G9 (which are merged) are between 80% and 94%, then I9,I10,I11 (which are merged) will turn Yellow. Also, under the same scenario, IF G8 and G9 is greater than 94%, then cells I9, I10, I11 will turn Red.
View 2 Replies
View Related
Jul 18, 2007
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
View 4 Replies
View Related
Aug 5, 2014
Having trouble consolidating 3 worksheets into one worksheet, on these 3 worksheets they all have the same headings which go from A-R. I simply need to be able to run a formula or use some sort of method to incorporate all 3 lists into 1 master list. The only way i currently can do this is to create a vba script which simply copies say 500 rows from the first worksheet paste onto master spreadsheet then copy 500 rows in second worksheet and find next blank row and paste etc.
Is that the best way to do this or is there a better way?
View 1 Replies
View Related
Oct 31, 2008
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
View 5 Replies
View Related
Nov 29, 2006
Assuming I have a table such as:
APPLE BEANS CELERY DOUGH
Will 5 10 15 2
Joe 1 3 7 11
Ben 9 6 4 8
What formula can I use to return a result like Celery by looking up Ben and 4 for example.
In other words, how do I lookup the heading of the column based on the the first column and a data point on the same row.
View 4 Replies
View Related
Jan 25, 2008
i have 2 excel sheets and have to compare and search for a combination of cells then highlight color in sheet1
to be more specific
i have data in sheet1 were i need to look for the first 3 fields of sheets1 with the 3 fields of sheet2 and if found look for the value in cell of sheet2 with the column headers of sheet1
and color the cell which is immdetialy below the column header found
for example :
i have 3 fields like in sheet1
country area code name1 name2 name3 name4
US ny 1 sam dirk ste hita
us va 2 jun mic atr star
and i have 3 fields in sheet2
country area code origin
us ny 1 name2
so it shuld walk thru each cell and check for the adjacent cell in sheet1 and highlight color for dirk
View 6 Replies
View Related
May 28, 2008
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
View 5 Replies
View Related
May 13, 2013
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
View 6 Replies
View Related
Aug 30, 2013
I have hundreds of rows of data which I need to sort into headings in a new tab.
E.g Column D has about 40 names which occur many times. Column G has 4 digit numbers which are unique.
I want to create in a new tab a column for each of these 40 names, using that name as the heading and then list the 4 digit numbers unders that heading. So if the name name "John" appears 20 times in Column D, it will get a heading in the new sheet and there will be 20 unique numbers listed below it from the data in Column G.
View 3 Replies
View Related
May 28, 2008
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
View 4 Replies
View Related
Jun 3, 2008
I want to filter the data and next. I want to copy the data from sheet1 to sheet2;
below code working fine, but.
Sub CopyFilter()
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else.............................
View 2 Replies
View Related
Jul 1, 2008
i have a unique transposing situation and i need a script to transpose my data. i haven't encountered anything like this yet so i wonder if its possible
my data is currently in this format:
Object1, Property1, Value
Object1, Property2, Value
Object2, Property1, Value
Object2, Property2, Value
i'd like to transpose it to:
........... Property1 Property2
Object1 Value Value
Object2 Value Value
View 9 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Jan 23, 2014
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
View 2 Replies
View Related
May 2, 2014
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
View 8 Replies
View Related
Apr 8, 2009
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
View 9 Replies
View Related
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Mar 17, 2014
I am trying to write VBA code that groups cells between blank rows and inserts a message if a string of text (a name) is missing from the entire group. I want the code to search cells in column A and group the cells between blank cells. Use the name I input in an input box as the search criteria and insert a message in the Column C next to the last blank cell in the group and then move on to the next group and highlight the cell in red with bold text. I am including a spreadsheet with an example of what the sheet should look like before and after the code is run.
View 11 Replies
View Related
Nov 12, 2009
I have date fields as column labels in a pivot table. When I try to group them I'm only given the option to group by integers and not by months, years etc.
I've had a look at the format settings of the column and they are formatted as date fields.
View 9 Replies
View Related
Feb 10, 2014
I have several groups of data in the same sheet. Each group has two blank rows above the first row of data. Each group has column "B" in common (e.g., "Phone" in the example attached). I'd like to add a title/label of "Phone" to the first column in the row immediately preceding the first row of data for that group.
View 1 Replies
View Related
Mar 2, 2012
I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.
The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).
The following columns will be exported from Generated Report -
BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.
BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126
For Matrix
The data will be imported into Matrix worksheet into the following columns as part of the row headings
- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data
The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.
I want each section (marked by BRID number)to be separated by row headings.
These row headings are to be generated after populating all data within each BRID number.
When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.
The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath
BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do
BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do
So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.
View 5 Replies
View Related
Jan 17, 2013
how to use the group box to group a number of option buttons together.
Question is, lets say, i have a total of 4 group box. if i want it to work in such a way where by once 2 option buttons are being selected (1 option selected from each group box), the rest of the option buttons in the 4 group box will be greyed out. is that possible?
View 2 Replies
View Related
Aug 9, 2006
My store uses a retail price "code" wherein a price like 99 in expressed as a
code like "PP"--exchanging the number digits 1-0 as letters.
Is there a function to do this automatically?
View 9 Replies
View Related
Jan 8, 2008
how to write a macro that will automatically input a sum formula under a range of numbers in my file. An example is below. Every month I get this report and I then true up the numbers which is why I need the sum formula at the bottom of each category. The problem is every month is not necessarily the same length, but the report is a few thousand lines long, so a macro to do it instead of manually doing
Example:
Revenue
Revenue source 1
Revenue source 2
Total Revenue--------SUM(all revenue cells)
Payroll
Tax
Incentives
Vacation
Etc
Etc
Total Payroll---------SUM(All Payroll cells)
Warehouse
Supplies
Maintenance
Etc
Total Warehous-----Sum(All Warehouse)
View 2 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Jul 26, 2014
I've got a table containing different codes and their values:
AAA 1
AAA 1
AAA 5
XCC 2
XCC 1
WTY 7
WTY 2
...
I'd like to group them so the code shows up just once whith its' value summed up:
AAA 7
XCC 3
WTY 9
...
See the file attached.
View 3 Replies
View Related
Jan 23, 2009
I'm working with a large database with hundreds of values that I need to have a table that looks like this:
A B C D E No class code Total 1.89 1.9-4.99 5 5.01-10 10.01-20 20.01-30 30.01-45 45.01-60 60.01-80 80.01-100 100.01-130 130.01-150 150+
I need each category to read another workbook page and count anything in x-price category with y value (being the A,b,c,d,e, or null)
View 9 Replies
View Related
