Assuming I have a table such as:
APPLE BEANS CELERY DOUGH
Will 5 10 15 2
Joe 1 3 7 11
Ben 9 6 4 8
What formula can I use to return a result like Celery by looking up Ben and 4 for example.
In other words, how do I lookup the heading of the column based on the the first column and a data point on the same row.
I have a worksheet with stock names across row 1, then repeated columns of <Stock Price>, <Price to Book>, etc.
< Date> <Stock 1> <Stock 1> <Stock 1> <Stock 2> <Stock 2> <Stock 2> etc.
<Date> < Price > <P to B> <Assets> < Price > <P to B> <Assets> etc.
<Jan1>
<Jan2>
What I want to be able to do is match the column data (for example, Stock 1 and Price column) using the index function, then match it to the specific date, so I know the price of the X stock on Y date.
If I were doing this for a single stock (where C1 holds the date, B1 holds the Column Title), the formula would be like this:
=INDEX(Data!$A$1:$IR$1067, MATCH(C1,Data!$A$1:$A$1066,), MATCH(B1,Data!$A$2:$IR$2,))
However, how do I add this additional matching variable of Stock Name?
Alternatively, if there is a more efficient layout, I'd appreciate hearing about it. Also, I know I could create stock-specific column titles (e.g. Stock1Price), but I'm going to be inputting this data into STATA, so this format is more conducive.
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
I am trying to find out if i can reference to a table on Excel. For example; if i enter in one cell the word 'january' (a header on the left of the table) and 'week 1' (a header on the top of the table) in another cell, can i set it to produce the value in the table that coresponds to the two headers.
View 2 Replies View RelatedI need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedInserting Rows and Headings. Is it possible to automatically insert Rows and Headings based on the Cell value of a particular column ? For example column B consists of a field called, 'Assigned Group'. Column A consists of a field called, 'Fault description'. Column A needs to have a heading depending on the value of Column B. One row also needs to be inserted above the heading.
View 6 Replies View RelatedI need to pull info to additional tabs. The problem I am having is that the data is sorted daily based upon performance numbers, so the REP names in column A can change based upon the data reported in column C.
What I want to accomplish:
Pull daily data for each unique name in column A to a team tab/worksheet that will be used to report that team's daily data.
Below is a representation of the data I need to break down by Rep Name and Team.
Rep DATA DATA DATA DATA DATA DATA DATA
1 2 3 4 5 6 7 REP 2 27.5% 14
51 86 REP 1 33.3% 14
42 74 REP 3 19.3% 11
57 86 REP 5 19.6% 9
46 66 REP 4 33.3% 9 ...........................
I have created an Profit&Loss excel sheet with all the accounts in column A and then the values for each month, January to December in column B to column K like this:
Column A...............Col B............Col C........Col D........Col E.....and so on
Account 1..............2222............58452........5255.........5844....
Account2................5.................45...............25...........458 ....
I've made a macro that creates a textfile and saves it on my desktop, but I get a text file with all the info in the same file, what I want is to get one text file for every month, that is text file number one(january) is: The heading info+column A+columnB
text file number two(February) is: The heading info+column A+columnC
text file number three(March) is: The heading info+column A+columnD and so on
In the heading info I have to state the period and then I need the macro to change this for every text file, that is for the january file it has to be "1 to 1", for february "2 to 2" and so on. As it is now it will always say "1 to 1" because that is the values I have entered.
Sub btnSkapaFil_Klicka()
Dim strAnv As String
Dim strBeloppJan As String
Dim strBeloppFeb As String
Dim strBeloppMars As String
Dim strBeloppApr As String
Dim strBeloppMaj As String
Dim strBeloppJun As String
Dim strBeloppJul As String
Dim strBeloppAug As String
Dim strBeloppSept As String
Dim strBeloppOkt As String
Dim strBeloppNov As String
Dim strBeloppDec As String
Dim strSavepath As String
Dim intRad As Integer
Dim intStartrad As Integer
Dim intSlutrad As Integer
Dim fs, a
strOrder = Range("I2")...............
I have a excel spreadsheet that has employee names, email address and DOB. The DOB format is 23/03. I need a program that will lookup the DOB row and when it matches the value I enter it extracts the employee name and email address. Once it has this information I need it to copy into an already created email template and send its off. On some days there are more than 1 person with a birthday so it will need to send multiple emails.
View 7 Replies View RelatedHow to return all possible values based on a single lookup ( or another condition / macro )
I have a table in B5:E100
In A1 I have a value
I need to look in B5:B100 for the value in A1 then place the contents of B:E for those cells in G5:J5 downwards
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
show/display data based on month criteria, with selected month in cell H2 (as start date) and I2 (as end date) my expected result start from cell H7, i called "blue area"..
see my attached workbook..
I have a bit of a challenge. You'll have to take a look at the attached files to understand what I am trying to do. I am asking for your advice. I am creating multiple spreadsheets (QPPcompany.xls) that will refer back to a master data(QPPdata.xls) file.
I am trying to figure out how to best set up the data file so that I can do lookups on the data from the referencing files. Here's the challenge. I need to be able to find in the data page the company name in Column A and then how many L's (or C's or P's) they had in a specified month. So for instance I need to be able to find the number 3 in cell E6 and place it in B15 of the referencing file. The required criteria for lookup are Company Name, Month and then L, C or P.
So my question is, is this possible with how my data file is currently set up? I think it may be a problem to have the month/year in row 4 refer to 3 different colums for each month (L, C and P). I don't mind making changes to the data file to make these lookups possible and I think it may be necessary.
I have an array in excel, 4 columns: Month, Day, Stock, Price. I dont know the most efficient way to handle arrays. I know i can loop through an entire array to find a specific value, but if i have a large array, this doesnt seem efficient.
For example, I would like to find the price in an Array (or Range), when i know the value of two columns. If this were in a database, I would write sql like this: " select Price from TABLE where month = 1 and Day = 3". The result would be 40.21. How can i do this with an array? I have attached a sample spreadsheet with the example mentioned above..
I have a work book with several work sheets, what I'm trying to do or find a a method of coping data from one sheet to another provided the data in any given cell matches a specific criteria. Example below:
Work sheet 1 is the primary sheet in the work book on this sheet I have a cell with a text value (Bob). Ok on the next work sheet 2 I need to search for a cell that contains (Bob). When or if it is found I need information from other cells in that row (where Bob was found) copied to work sheet 1 in a specified row and colum. If it is not found a negative value can be placed in the specified cells.
I am setting up a worksheet (1) with a full list of part numbers supplied, cost etc. ie:
Part Description Price Qty
1234 Blah Blah £1.00 1
1235 Blah Blah £3.00 0
1236 Blah Blah £2.00 2
And I have set up a seperate worksheet (2) as an invoice. What I have been trying to do is when I enter a qty in worksheet (1), worksheet (2) will reconise an entry in the qty colum an copy selected fields/ cells. I can do a "=" or use an "if" statement looking at anything greater than "0". but is there a way I can get the invoice worksheet to ignore any lines with "0". So it will only copy over the information with only qtys for the invoice ?.
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
Having trouble consolidating 3 worksheets into one worksheet, on these 3 worksheets they all have the same headings which go from A-R. I simply need to be able to run a formula or use some sort of method to incorporate all 3 lists into 1 master list. The only way i currently can do this is to create a vba script which simply copies say 500 rows from the first worksheet paste onto master spreadsheet then copy 500 rows in second worksheet and find next blank row and paste etc.
Is that the best way to do this or is there a better way?
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
i have 2 excel sheets and have to compare and search for a combination of cells then highlight color in sheet1
to be more specific
i have data in sheet1 were i need to look for the first 3 fields of sheets1 with the 3 fields of sheet2 and if found look for the value in cell of sheet2 with the column headers of sheet1
and color the cell which is immdetialy below the column header found
for example :
i have 3 fields like in sheet1
country area code name1 name2 name3 name4
US ny 1 sam dirk ste hita
us va 2 jun mic atr star
and i have 3 fields in sheet2
country area code origin
us ny 1 name2
so it shuld walk thru each cell and check for the adjacent cell in sheet1 and highlight color for dirk
I am trying to copy/paste header data into corresponding rows. A1 and A2 have the header information and need to be placed in the corresponding rows under columns A and B. I have been doing this manually and it is very time consuming since there are roughly 2000 rows. I believe a macro can accomplish this task but unsure how to create it. I was also unable to find any similar threads. I have attached a sample workbook. The original tab has the imported information and the Finished tab has what I would like the data to look like.
View 3 Replies View Relatedi am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
I have hundreds of rows of data which I need to sort into headings in a new tab.
E.g Column D has about 40 names which occur many times. Column G has 4 digit numbers which are unique.
I want to create in a new tab a column for each of these 40 names, using that name as the heading and then list the 4 digit numbers unders that heading. So if the name name "John" appears 20 times in Column D, it will get a heading in the new sheet and there will be 20 unique numbers listed below it from the data in Column G.
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
I want to filter the data and next. I want to copy the data from sheet1 to sheet2;
below code working fine, but.
Sub CopyFilter()
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else.............................
i have a unique transposing situation and i need a script to transpose my data. i haven't encountered anything like this yet so i wonder if its possible
my data is currently in this format:
Object1, Property1, Value
Object1, Property2, Value
Object2, Property1, Value
Object2, Property2, Value
i'd like to transpose it to:
........... Property1 Property2
Object1 Value Value
Object2 Value Value
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.