Code:
A
B
C
D
2
34
If I had columns as above with values in B1 and C1 but none in A1 and D1
How do I loop through so that columns A and D are hidden?
My spreadsheet has columns A to DI and different columns have values each day so I want to write code to hide just the columns with no values.
I have an intern that is working with me, and I have a file that I need updated but one of the columns has confidential information so I would like to just hide & password protect this column this way he can't access/view this information but still have access to modify the rest of the spreadsheet.
Is there a way to do this in Excel 2007?
In excel 2007, I have an embedded image on a sheet which I want to make it hidden by default. When someone hovers over a particular cell say cell B3, then image should be displayed below this cell (sort of hyperlinking) and when the cursor or activell cell is not in B3 it should be hidden again. What steps/technique/VBA code will make it happen ?
View 3 Replies View RelatedI have Microsoft Office Excel 2007 Power programming with VBA in which this website was listed as a good reference site. I am working on a spreadsheet where I want to select the last non-empty cell in a column and the column always has some cells that are empty, though it is NOT the last non-empty cell in the column. This spreadsheet is automatically generated and I want to change this particular column to all one format and all one number, 0042. This spreadsheet is then loaded into another system via tab-delimited txt file, so this number is meant to serve as an indicator. Sounds like I gave too much information, just wanted to be clear.
View 9 Replies View RelatedI created a workbook called "controlelijst.xls" using Excell 2007. In this workbook i created a sheet that i use as a template, it has conditional formatting all over it. That in fact is not the problem. I copy this template for every new issue i have.
The thing i would like to see happening now is when i enter the value "Y" in cell O10 that the active sheet on wich the value is entered becomes hidden. Because the reason for setting this value is that all conditions are met on this sheet and it does not have to be visible anymore unless i unhide it.
HTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
In excel 2007, when I do workbook_Activate I want to hide all of the command bars. in 2003 vesion I used
.CommandBars("Worksheet Menu Bar").Enabled = False
But it is not working for me on 2007.
Using Excel 2007, I have a workbook with 7 sheets. The first one is a Navigation Page where I have checkboxes (form controls, not active X) with the names of the other 6 sheets. When the box(es) are checked, the sheet(s) become visible. I have accomplished this by assigning macros I recorded.
I need to now add the opposite: When the box(es) are unchecked, the sheets become hidden. From googling and looking for other threads/forums here, I gather that I need to add code/ VBA, but I know nothing about these at all.
Excel 2007.
I created an excel Calendar that has columns for months and weeks, and rows for hours of the day.
I have two drop lists one contains months, and one contains weeks.
Basically if you choose august from the first drop down list, all the rest of the columns that are not August disappear, and the sheet only shows august.
The second dropdown selects the week. If you choose week 1, it shows week 1 of this particular month. This second drop down is what I do not know how to make work.
This is the VBA code i used.
Private Sub ComboBox2_Change()
Select Case ComboBox2.Text
Case "May"
Range("All").EntireColumn.Hidden = True
Range("May").EntireColumn.Hidden = False
[Code] ......
I do not know how to make the code or choose the categories so that It only shows the week of the month chosen in the first column. Will I have to name each and every group of columns for each and every month as May - Week 1, May - Week 2...... June - Week 1, June - Week 2, etc... or is this a way around it?
I currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
I have an Excel 2007 workbook which has five sheets in. I just wondered whether it is possible to hide all five of them when the workbook is first opened. Also I would like the user to be asked for a password when they wish to unhide a sheet, with the password being different for each of the sheets.
Is there also a way to do this which won't be affected by Excel disabling all Macros when the application initially opens.
I am having a small problem with microsoft excel 2007.the problem is that: my excel 2007 cannot display tooltip of the column width when I keep and drag left mouse
Show tooltip of the column width as attached file.
I also tried many ways to find settings of advance menu. But cannot.
Pic.jpg
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
I need to remove the duplicates under column B for each item under column A and I can't seem to figure out how to do it.
I'm using Excel 2007; I would prefer a VBA solution, as I have to do this on a monthly basis. However, if a formula is the best way to go, then that's just fine. Either way, I'm preparing the data for a pivot table. I am unable to post the actual document in the interest of data protection.
Essentially, I'd like to turn this-
_ A B
1 Paris Bill
2 Paris Bill
3 Paris Mike
4 Paris Derek
5 Paris Derek
6 London Mike
7 London Bill
8 London Mike
9 London Bill
10 London Derek
11 Tokyo Derek
12 Tokyo Derek
13 Tokyo Derek
into this-
_ A B
1 Paris Bill
2 Paris Mike
3 Paris Derek
4 London Mike
5 London Bill
6 London Derek
7 Tokyo Derek
In other words, each city should have only one instance of any name that accompanies it; not all names will accompany each city.
I've seen excel sheet view like this [URL].....
View 2 Replies View Relatedusing Excel 2010.I have a column (column X )which i want to hide and lock so that only i can access the column.I have some information here i need to hide and protect.Is a code/password a option
View 1 Replies View RelatedHow can i hide and unhide column and rows using checkbox in the excel.
detail price qty amount
chair 1000 1 1000
some time i just want to see only the amount or some time i want to see the qty, how can i hide and unhide row or Column
I have a question regarding filtering of columns. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consecutive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
I have Excel 2007, and I have column 1 with a thousand entries "HC 14-0001" all the way down to "HC 14-1000". I have on my hard drive 1000 foldiers named the exact same "HC 14-0001 to HC 14-1000". I want to create a Hyperlink from each item in that column to its corrisponding folder on the hard drive. I can easily create the Hyperlink, but I want to find someway to copy them. I can create the first two rows... HC 14-0001 and HC 14-0002 and create good Hyperlinks to the folders, but when I highlight them and drag them down, the excel spreedsheet is updated all the way to HC 14-1000, but the Hyperlinks do not change.
How can I get the Hyperlinks to change? I don't want to spend the next week creating Hyperlinks for a 1000 entries on this spread sheet, and I have 5 other spreadsheets exactly the same.
I've to continue the same sheet made by my bos (I'm using excell 2003, my bos use 2007). However, I'm unable to find the next column which my bos used it. Ex : My last column in excel is IV column. However, my bos's column in more than IV column.
View 2 Replies View RelatedIn any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
Using Excel 2007, how can I associate a recurring name in one column with one and the same number in another?
Ex.: "Jones" in C8 = "1" in G8
"Smith" in C9 = "1.5" in G9
"Williams" in C10 = "2.5" in G10
I hope my question is clear enough.
Formula that can do this?
Sheet1
ABC111213214325436547658769871018112123113421453156416151726183194120522163227423852496257268279
Excel 2007
I basically want column A to be like Column C. The logic is that every time the row that have 1, skip a row and run the numbers until the next 1 appears.
I have some data in a Excel 2007 workbook in the range a1:d100 and I want to sort the data according to "A" column, which is the first column of the range and when I am giving data sort it is prompting to select the column, where as in 2003 it will prompt to select the column but by default it will take the first column of the range, so if we want the first column the we can hit enter key otherwise need to change the column name which will save time.
My question is that whether there is any setting I can make at the time of sorting data and by default it will take the first column of the range.
Column A has following names: A5 Peter A6 Sally A7 Andre A8 John A9 Wayne Column B has following names: A5 Andre A6 Wayne
I need Column C to show names that are in Column A but not in column B ...
Column C should show following: C5 Peter C6 Sally C7 John
I am struggling with this in excel 2007
I am using Excel 2007 and am having some trouble formatting a column for dates. I am setting up a template spreadsheet for the company I work for. The template spreadsheet has a sheet for entering the raw data and a sheet for summarizing it. I need new dates that are to be entered to be formatted correctly. I have set up a sample spreadsheet and inputted some sample data which looks like the following:
Date
06.11.13
07.11.13
08.11.13
05.10.13
06.09.13
Now if I format these cells as English(UK) dates with the "dd.mm.yy" format the data>sort cannot sort these dates from oldest to newest. I can correctly sort them by using "text to columns" however if i do this then it only format's the cells that currently have a date entered into them and not any new date entries.
So in summary: Format cells into a date format does not allow dates to be sorted using the data>sort tool. (I assume that as they cannot be sorted ,a formula that searches for cells with dates before a certain date will not work either) Text to columns does not allow new entries to be formatted in the same way as the cells that had data in them when the text to columns tool was used.
Is there a way to format blank cells so that they will recognize the data inputted as a date?
Currently I'm using excel 2000. Can't hide hidden column when save as webpage?
View 2 Replies View Relatedmacro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View RelatedI'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
I am trying to make an excel sheet which has a 2 column drop down. For example I want to have a drop down list in column 1 and when I select "Item A" in column 2 "item A" 's phone number appears. If i select "item B" form the drop down this, "Item B's" phone number would also appear in column 2 and so on. how this is done (if possible) on Excel 2007? I was hoping it could be done from one workbook to another but If it is easier from one worksheet to another then that is fine too.
View 5 Replies View Related