Code:
Column A Data:
007-006
007-006P
008-008
008-008P
Column F Data:
43,000
434,000
1,947,299
0
{=SUM(IF(RIGHT(TRIM(A4:A23),1)="P",0,F4:F23))}
When a row is inserted above row 24, the formula does not automatically include this row.
When this cell formula is modified manually, I get an error, unless I save the formula by pressing CTRL+SHIFT+ENTER.
How can I make it so that when a user inserts a line above this formula, to add more data, I can make sure that the formula automatically includes this row so the user will not get an error when trying to manually include this row. Users who will use this will know know this is a Array Formula.
I have an Excel document which receives data dump from a weather website cells B1:I20. I need the temperature and dew point from cells B3:I3, however the data is returned in a "Temperature / Dew Point" format. To use the data, I separate the Temp and DP into their own cells B22:I23 by:
I have a byte array that contains a 4 byte floating point number. How would I convert this byte array to the single typed floating point number it contains?
I have an excel spreadsheet like the one attached. My problem is column A has a ton of blank cells. Wht I'm trying to do in Column A is write a formula that fills in the blank cells with the number of the last previous filled in cell. For example the first number is .25 I want to fill in the blank spaces below it with .25 all the way until it reaches a different number which in this case is .219.
Once it reaches .219 I want it then to fill in the blank spaces below it with .219 until it reaches a different number. So basically I'm looking for a formula to fill this in on its own instead of having to drag the cells over and over again manually.
In the excel spreadsheet attached I have in Column D the end result I wish to accomplish.
I have these postcodes as example below but the array formula I was going to use won't work because, for example when I count everything with the Birmingham post code 'B' it counts every thing that contains the letter B which could also be in the post code BA1 3RL?
I am using office 2007 and here is the problem I am facing. I am using a formula and it is based on two columns data. The formula result is at C20:C2400, while the two data columns are at A20:A2400 and B20:B2400. I add one more row of data at A2401 and B2401, I expect the formula result would auto extend to C2401 but it doesn't, nothing happen.
I check that I need to turn on the auto extend check box in option, I check and it is already on.
set a formula to auto calculate the staggered rent for the month. When I change the date, it will tell me for this month I should charge according to the rates for the year.
Rent for the month Start Date Year 1 Year 2 Year 3 01/07/14 Explanation 01/08/13 10 20 30 10 < 1 yr = 10 01/07/13 40 50 60 50 enter 2nd yr = 50 16/07/13 70 80 90 76.29 (15/31*70)+(16/31*80) 16/07/13 10 20 30 15.16 (15/31*10)+(16/31*20)
I send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit Sub PointName() Dim Ws As Worksheet Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy Sheets.Add With ActiveSheet .Paste .Name = Trim(Cel) .Range("A1").Select End With Next Ws.Activate End Sub
I turned it off for a while and when I turned it back on I am getting an error Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
I'd like to point a cell to a subtotal on another sheet but that sheet will periodically have the subtotals removed, more data added, then sorted and subtotalled again. Is there a way to have my other cell find the subtotal that matches a certain criterion (in this case, cost center)?
So how can it be that Excel calculates Pi()/90*90=Pi(); but Pi()/90+Pi()/90+Pi()/90......90 times is 0.000000000000033527. And why is the number zero out to 14 decimal places not being returned as 0?
I need to know exactly when a series of sequentially increasing radians = Pi(). The length of the series is dynamic and can be as few as 6 and as many as 120. And right now Excel is not cooperating.
Here is what excel thinks Pi()/90+Pi()/90+....90 times =
3.14159265358980000000
3.14159265358979000000 (this is how excel displays Pi() out to 20 decimal places)
So Excel thinks the two numbers are not equal to each other, and what could be more interesting is that Excel thinks the difference is
0.00000000000000355271
Even after copying and pasting both numbers as values out to 20 decimals. Excel still thinks the difference is 0.00000000000000355271
How is that possible?
I have Excel 2013. Is there some sort of bug here? I had posted earlier about major headaches when using natural log. Random cells keep getting forced to 14, 15, sometimes 16 or 17 decimals. No rhyme no reason. I can custom format every cell in worksheet to 2 decimals, and as soon as I hit F9... ############# all over the place. At least with Pi() the decimals are under control, but the math is not right. Pi()/x + Pi()/x.....x times = Pi().
Using excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
Is it possible to Conditionally Format using the (Custom) Data Validation Tool one or both of the following conditions:-
1. Force the user to enter the correct decimal point position for a given currency :-
The are 3 different decimal point locations location's - 0.87624 / 123.123 / 1273.00 There are always 6 numerals We have a table to lookup which specifies where the decimal point is on all currencies
CURRENCY AUDUSD< List is linked to a table Price - High 0.87744< Decimal point dependant on chosen currency pair chosen Price - Low 0.86596 Price - Close 0.86823
2. As above but numbers once entered will be formatted accordingly to the correct decimal place to the corresponding currency
I have instances where my Y variables sometimes contain a zero in the data and i need a formula to skip over that data point in the LINEST calculation.
Y variables are in Row 1, Columns A:E X variables are in Row 2, Columns A:E
The following formula is returning a #VALUE! error: .....
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line Column B is where I want the calculated Y value to go for each point Column C is where I want the calculated X value to go Column D is where I want the calculated Z Value to go Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1) Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
I am currently using this code to place names in a combobox (active X). How can I use an array to perform each line to all 12 months without repeating the code over and over?Here is what I have:
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2) these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
I have an excel sheet which contains Supplier certs issue date and date of expiry of a particular cert. I would like to send an email to user when the date of expiry is met. I have very little knowledge or no knowledge of coding in VB. I want to send the email 30 days before the cert expire. i have attached the file.
