I have several macros that join spreadsheets and then sort and subtotal them. I now need to use my spreadsheet that has the subtotals and place only the subtotals into a new workbook. For instance the new file should contain the name of the item and "subtotal" for that item, and the list of all the data should remain in the original file.
I wonder if someone has a clever solution for the following, I have a spreadsheet where I have done subtotal on some of the figures, does anyone know how I can copy (and paste into a new sheet)only the rows where I have a subtotal?
I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.
On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.
i am trying to do the following- can some one pleeeeeeease help me
Each tab has columns up to M.
1. Sum Column E for each tab(note column will varie in size)
2. Then copy Column C and Column E to one tab (called " upload)
there will be 60 tabs - so am tying to loop through and peform a subtotal for column E then copy "C" and "E" to another tab called "upload" note - all tabs will be copies to the one tab called "uplod once subtotal is performed.
way to do this but i have a sheet that is into 5 - 6 thous rows, in one of the columns (names) i sort it by names and then order it by subtotal for certain values.
What i need to know, is there anyway i can take just the subtotal values out and put onto another spreadsheet without copying and pasting it all as there are lots of subtotals and this would help alot as the other info is not nec. just the subtotal'd info. either that or is there anyway i can highlight the subtotal'd row info in yellow/bold text anything like that that would make it stand out without having to do it manually?
What I am trying to get is the distinct number of cost codes based on the budget codes.
Basically, when I do a regular pivot, I can see it gives me the 'COUNT OF CODE CODE' = 4 in the summary section, but, that seems to give me the number of records per Cost Code which is not what is needed but rather I would see a distinct # of codes codes based on budget code, and to boot, the subtotal should be directly under the Cost Code column.
Is that even possibly just using the pivot tools available in excel?
I'm trying to filter a data set to see only those groups that have a subtotal count of 3 or greater. The subtotals are at each change in customer to count the number of divisions that customer is associated with.
In other words, how can I see a list of only those customers who have the permission to shop 3 or more brands?
I know that there is a way to remove or add subtotal for different fields, how to add subtotal only for the fields that have more than 1 value? I don't want to to subtotal for anything that has only 1 value.
Is it possible to get a unique count in a group subtotal though the elements in the group may not be unique using Pivot Tables w/o resorting to Power Pivot?
Ex
Group 123 Group 456
Are both members of NorthDivision
If someone is in Group 123 for 9 months, then Group 456 for 3 months, that membership should be reflected in the correct group accordingly.However, that person should only be counted once in the NorthDivision, not twice.
Output:
Group 123 0.75 Group 456 0.25 NorthDivision 1
At first glance, it appears easy, however, what if membership is only total 3 months?Then Group would increment 0.25, but I need NorthDivision to increment 1
I have a spreadsheet that summarizes all of our assets in cell C1947: subtotal(3,D2:D1944)
In column G, I have a "Y" or "N" or BLANKS "". I'm trying to come up with a formula that would give me the correct totals for the Y's or N's or blanks when I select one of the AutoFilter columns. For example:
I currently have 1,943 assets. Column G has the Y's N's and blanks. This is showing all the assets. If I select column F which is a specific location, I would like to see the correct count of Y's N's and blanks while the subtotal command shows the total assets.
I am creating a workbook with multiple worksheets, one overview sheet and then one sheet for each month of the year.
In the monthly sheets I have a Category column for which I have created a drop-down menu of expense categories. Then I have an Expense Amount column where I enter the amount spent.
The Category column will not necessarily remain sorted by category because I will be entering the expenses as they come up throughout the month so the categories will be all mixed up, unless I manually sort them.
What I want to do is somehow automatically calculate a running subtotal by Category (that will update with each new entry) and simultaneously automatically transfer the running subtotal for each Category to a specific cell on the overview sheet.
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
attached the file. Sheet1 & Sheet2 are the "Source" sheets and "Summary" sheet is the "Target" sheet.
1) Macro "TopParts1" filters the Top 80% (Column B) in Sheet1 and copies this to A1 in the "Summary" sheet.
2) Macro "TopParts2" filters the Top 80% (Column B) in Sheet2 and copies this to E1 in the "Summary" sheet.
What I am hoping for is to combine the macros 1) & 2) so that the Table as shown in "Summary2" sheet is done in one instance. The highlighting is just for illustration. Presently I need to select sheet1 rum the 1st macro... select sheet2 run the 2nd macro. Not very efficient. One table for 1 macro would be excellent.
I have 4 source workbooks and a master workbook which is linked to the source workbooks, if the source workbooks have no value in specfic cells the master workbook which is linked to it shows a 0 (not a problem). Now if I want to copy only cells which have a value other than the 0 to the end of used rows on another sheet on the Master workbook using VB I run into a problem because it sees 0 as a value and copies as well.
The issue is how do I stop the 0 showing and not being seen as a value. This 0 shows regardless of format.
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats) Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents) Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
I have this macro which does a really nice random selection, the problem I have though is that it deletes everything except for the result set. How to adjust the macro in such a way that instead of deleting the the original data, it copies and pastes the result set to a new worksheet?
Code: Sub RandomSelect() Application.ScreenUpdating = False 'disable screen updating to avoid screen flashing Application.DisplayAlerts = False
Dim wbk1 As Workbook, wbk2 As Workbook, lstRow As Long, wks As Worksheet, startCut As Integer, selNum As Integer, lstCol As String
Set wbk1 = ActiveWorkbook Set wks = wbk1.ActiveSheet
I would like if someone could tell me what formula to put in the cells in Column E so that I can copy it to all cells in Column E and get the right results.
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria: 1. xyz 2. acb 3. hij
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.
Sub AUTOFILTER_withouthead()
' AUTOFILTER_for_drop Macro ' Macro recorded 1/27/2008 by DD Dim ws As Worksheet, wd As Variant Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value)) Set wd = Worksheets("Destination").Range("A1:F65000") ...
I've got a bizarre problem here. I've been working on a piece of code and one line has started behaving erratically: Sheets("BLANK SCORE").Copy after:=Worksheets(Worksheets.Count)
I want to do is create a copy of the sheet called "BLANK SCORE" and copy it after the last sheet in the workbook. This code is part of a loop that runs a maximum of 10 times (potentially creating 10 copies) and I've had inconsistant results such as:
*) Code works and copied sheet is created (desired result) *) Code is ignored and no copied sheet is created (shouldn't do that) *) Sheet is copied to a new blank Workbook (...huh ?)
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
I use the Macro below to search in a datafile and copy the results into another worksheet. Only problem, when the macro finds a result he should copy and start over again, starting from the row below, but somehow he start 2 rows lower, so I'm missing results. (when he should copy row 2,3,4,5,6 - the result is only 2,4,6) I tried changing
WerkRij = WerkRij + 1 into Werkrij = WerkRij StartRij = Rij + 1 into StartRij = StartRij but then he keep searching and copying the same cells
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A row 1 ABCDE row 2 FGHI row 3 Party Name:Abcd row 4 JKLM row 5 nopq row 6 STUV row 7 Party Name:ryz row 8 Party Name:mno row 9 XYZ
I want the results as below:
Column A Column B Column C Column D row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno