Excel VBA Checking Column / Row Of Data
Aug 11, 2014
I have a requirements in excel vba to evaluate and check the column data from other workbook. I would like to filter remarks for all "INTRANSIT" from my working file then If the data or tracking# is exist from the source file evaluate if transaction remarks is "Done" or if "Not yet" exist. If remarks from SourceFile is "Done" i will put "RECEIVED" or If "Not yet" i will put "INTRANSIT" in my Working file Remarks column.
Workbook WorkingFile:
Tracking# QtyModelRemarks
---------------------------------------------------
D-8840862402|20llllRECEIVED
D-8840862402|20kkkkRECEIVED
D-8840862411|20mmmINTRANSIT
D-8840865000|230mmmINTRANSIT
D-8840865000|50bbbbINTRANSIT
D-8840862450|20bbbbINTRANSIT
D-8840862450|120bbbbINTRANSIT
SouceFile --- to evaluate if Done or Not Yet
Tracking# QtyModelRemarks
----------------------------------------------------------
D-8840862402|20llllDone
D-8840862402|20kkkkDone
D-8840862411|20mmmNot Yet
D-8840865000|230mmmNot Yet
D-8840865000|50bbbbNot Yet
D-8840862450|20bbbbNot Yet
D-8840862450|120bbbbNot Yet
View 11 Replies
ADVERTISEMENT
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
May 9, 2014
So in my excel document I have it such that on the first sheet (Labeled 'Sorted') the data is set up as follows: LOCATION, EXTENSION, NAMEWith the appropriate data under each header. On the second sheet (Labeled 'Locations_Ext') I have a named range called Locations; it contains extensions from a separate document, names of people associated with the extensions from the document, and their locations on the map. I am trying to have it such that the excel matches the extension number given on the first sheet with the ones that I extracted from the document on the second and output the location into the first column on the first sheet. The code I have set up for that process is:
=VLOOKUP(B(//SomeValue),Locations,1,FALSE)
I then want the excel to cross check the information that I took from the Visio to see if the visio is up to date with the latest info we have received (Which is the data on the first page under Extension and Name). The code:
=IF(C(//SomeValue)=VLOOKUP(B(//SomeValue),Locations,3,False),"Good","Error")
Both codes seem to be giving me this: #N/A as the results for every cell.. I'm using MS 2010
View 2 Replies
View Related
Apr 15, 2009
I am a new member, with not a lot of VBA experience. Sorry for the vague title .. couldn't come up with something ^^". The idea is, I made an list with several anime titles I am watching (in column A) In column G it shows the status; "Watching", "Completed", "Planning to Watch", "On-Hold" or "Dropped". I managed to let the colors of those words change with this
View 4 Replies
View Related
Dec 11, 2011
I'm trying to create a questionnaire and in each question you got to rank the answers 1, 2, 3 and 4 according to your preferences.
So I'm trying to use data validation to allow ranges between 1 and 4 and at the same time I'm trying to use =countif($A$1:$A$20,A1)=1 to prevent repeating selections but my problem is that with the data validation tool I can only select one of those options either allowing whole numbers between 1 - 4 or allowing custom and using =countif($A$1:$A$20,A1)=1.
Is there a way to do both?
View 6 Replies
View Related
Nov 8, 2012
I seem not to be able to solve, regarding an Excel VB6 integration.
I wish to check if a specific Excel file is open at any given time (I'm using a timer for this.)
This is what I had so far, but I need it to be checking prior to this and I don't like this solution really (wasn't complete.)
Code:
Private Sub Command1_Click()
Dim oXLApp As Excel.Application
Dim oXLBook As Excel.Workbook
[Code]....
View 5 Replies
View Related
Sep 2, 2009
I have a workbook with 2 sheets. What I want is:
1. Cells in column A, Sheet 2 are compared with the Cells in column A, Sheet 1.
2. Sheet 3 is produced containing all the rows in Sheet 2 for which there is no duplicate cell in Column A, Sheet 1.
3. The rows copied from Sheet 2 to Sheet 3 are highlighted on Sheet 2. Attached is a workbook with 3 sheets. Sheet 3 is the desired result (+ the cell highlighting on non-duplicates on Sheet 2).
View 5 Replies
View Related
Jun 24, 2014
We have mapped a network drive to a SharePoint Directory, while we are able to copy a file (using Macros) to this location, this file does not appear in SharePoint to the other users, the reason being that it is not checked in. How to Check using Excel Macros.
[URL] .....
View 1 Replies
View Related
Apr 15, 2013
I have two excel 2010 files that I want to run this on. Each one has about 10+ worksheets in them. I am looking to have a vba script that will look at columns D and E starting at row 4 and check if they are expiring in the next month or have already expired (before today's date). Then it would return a text file that will say which worksheet it is on, the row and column, and what date is in that cell.
View 9 Replies
View Related
Jun 24, 2014
We have mapped a network drive to a SharePoint Directory, while we are able to copy a file (using Macros) to this location, this file does not appear in SharePoint to the other users, the reason being that it is not checked in.
How to Check using Excel Macros.
View 2 Replies
View Related
Jun 11, 2014
I'm working with a file from SharePoint (FileA), "FileA" goes out to Sharepoint and opens "FileB" (if not already open) then copies information from "FileA" to "FileB". However if "FileA" is left open, or someone else has it open I am unable to open "FileA". How in VBA can I check to ensure I don't have it open locally (if so swich and continue), checkout and open in SharePoint (if not already open) or Prompt with options to force checkin, checkout to copy info?
Simple VBA copy I used:
Workbooks.Open FileName:= _
"http://sharepoint.baaa.com/sites/SCDT_DSD/Weekly_Releases/11.%20Combined%20Weekly%20Task%20List/1/Automated_Status_Update.xlsm"
Sheets("1").Select
Range("A1").PasteSpecial Paste:=xlPasteValues
View 2 Replies
View Related
Jul 15, 2014
If seen a couple of examples but for whatever reason it doesn't work on my sheet. (Excel 2010 32 bit) I don't understand how to highlight the entire column to see this particular value is not in this list. I have two lists, I want to see what data am I missing In list 2 that I have in list one. Basically all I am trying to do is see what values are not in the second list but are in the first list so I can later add them to the second list. (Also the 2nd list is longer than the first if that makes a difference.)
View 3 Replies
View Related
May 16, 2014
I'm working on a sheet I have to complete and I'm blocked 'cause I'm not able to find the right formula to get the result I need.
I have a sheet that contains 4 columns with the following content (consider the following just as an example. The real sheet contains more that 25,000 rows.
User ID Repository 1 Repository 2 Repository 3
001FG x
001FG x
10GA x
20PK x
20PK x
20PK x
21CC x
4C1D x
Now, the table contains the user id (unique ID) and three columns that stand for the access right the user has for accessing a specific repository.
This means that a User can have more than one occurrence in the sheet because it could have rights to access different repository (i.e. the user 20PK can access all the repository).
What I should be able to do is to transform the table above to a new one with unique user id and the rights for each repository. I would need something like this:
User ID Repository 1 Repository 2 Repository 3
001FG x x
10GA x
20PK x x x
21CC x
4C1D x
How can I do this by using a formula and not a macro?
View 3 Replies
View Related
Sep 17, 2012
I have a macro that seems to work okay for older versions of Excel - I use Office XP (2002) tell me if this will work for newer versions (2007 / 2010)?
KB1017 - Trust access to VBA project
Code:
Function VBATrusted() As Boolean
On Error Resume Next
VBATrusted = (Application.VBE.VBProjects.Count) > 0
Exit Function
End Function
Private Sub Workbook_Open()
If Not VBATrustedAccess() Then
[code]....
I was thinking that i should probably have
VBATrusted = -1
as the third line so that it is negative unless the tick is there. No way of checking older versions right now though.
View 3 Replies
View Related
Nov 10, 2008
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
View 2 Replies
View Related
Feb 2, 2007
I have a user form that writes data to a worksheet (Sheet1)
Is there any way of getting a macro to check what is in "textbox1" against all the entries in column A of "Sheet1"?...........and bring back a message if it already exists?
View 9 Replies
View Related
Apr 6, 2009
I'm looking to display a message if data in the active cell is changed. I'm using the code below to check if data in a cell matches certain criteria:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 9 Then
ThisRow = Target.Row
If Target.Value Like "As*" Then
MsgBox "Please add a note about why the biology of this species is distinct the Comments column."
End If
End If
But I have another column where the cells are prefilled with data. This column stores data from a dropdown, such as Critically Endangered, Endangered, Vulnerable etc. I allow the user to change the data in these cells, by selecting an alternative value from the dropdown, but I want to display a message if they change the data in one of these cells.
View 9 Replies
View Related
Jan 29, 2009
sheet1 has a list of names. sheet2 has a list of names and some of the names are the same as sheet1. What I want is for the names on sheet1 to indicate (preferably change text colour) if they are on sheet2.
View 5 Replies
View Related
Jun 4, 2009
I need to make sure that the two sets of data i have highlighted in yellow and blue are completely the same. Please can some one write a formula that will flag a cell next to the blue column indicating that there is a difference between that of the blue and the yellow columns individual row.
View 3 Replies
View Related
Sep 13, 2013
I want to take what is in column A and replace the number after the "=" with new number.
I need a formula that identifies the 6 numbers or letters after the = and replaces with column A
111111 showstocknumnber//details.php?vid=111111
222222 showstocknumnber//details.php?vid=111111
345673 showstocknumnber//details.php?vid=111111
The 111111 after the = could be any string of 6 letters and numbers. The contents of column b are a URL.
View 1 Replies
View Related
Jul 10, 2014
The following code doesn't check null condition in Scannedby field. The scannedby has text data type. The code gives me all the data where scandate=20130722 but doesn't check that scanned by can't be blank.
[Code] .....
View 5 Replies
View Related
Aug 1, 2012
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
View 7 Replies
View Related
Jan 3, 2013
using a command button to input data back into the spreadsheet at a specific location.
Background: I am building a time clock spreadsheet, of sorts. I have a user form that provides a list of volunteer names in a combobox and then a list of activities they can perform in another combobox. Some activities have Details. (So, VolunteerName Todd can choose Activity Maintenance, which has no details; Volunteer Joe can choose Activity Teaching and then can select Details Intermediate 2.) The volunteer then clicks a SignInCommandButton.
The SignInCommendButton populates a worksheet (VolunteerLog) with the following information:
Column A: Volunteer Name
Column B: Today's Date
Column H: Exact Time In
Column E: Activity
Column F: Details, if populated
The SignInCommandButton also copies a formula from cell L2 into the appropriate row of column C (Time In) that rounds the Exact Time In to the nearest 15 minutes. The SignInCommandButton then does a Copy/Paste Special Values to remove the formula from column C and then resets the Userform.
What I need to do:
1) When the person first selects their name from VolunteerNameComboBox, I want to check 3 things:
a) whether the person's name exists in Column A of the VolunteerLog worksheet;
b) if it does, if the Date associated with that entry = Today; and
c) if it does, if the Time Out column is Blank.
If all three conditions are met, I want the ActivityComboBox to populate with the values in Column E and F, if necessary. The user will then click the SignOutCommandButton. (details in a moment)
I already have the code for if the conditions aren't met (Activity box populates and, depending on the selection in the Activity box, the Details box may appear for a selection to be made, or may remain hidden.)
2) The SignOut Button needs to enter the Time into Column I of the appropriate row found in (1) above. It will also need to copy the rounding formula I mentioned earlier, and do the Paste Special, but I have that already.
For (1), I think I have a start. My thinking is to first check if the Name selected in VolunteerNameComboBox is in the VolunteerLog. Each time it shows up, I'd like to add it to a list (range?) called rngSignedInDate. Then I'd loop through all the entries in that range checking if the Date = Today. If it does, then I'd add it to a list called rngSignedOut and loop through those results to see if Column C (Time Out) is blank.
I think I have the first loop, but am stuck on how to populate the results into rngSignedInDate. Here is the code:
Code:
Private Sub VolunteerNameComboBox_Change()
'Check if the Volunteer has signed in already
Dim strVol As String
Dim rngSignedInVol As Range
Dim rngSignedInDate As Range
Dim rngSignedOut As Range
Dim rngSignedInActivity As Range
Dim rngSignedInMatch As Range
[code]....
(2) I haven't started working on the SignOutCommandButton. The challenge for me with that is directly tied to the challenge in (1). If someone does pass all 3 tests, I need to have that specific instance defined in a way that I can have the SignOutCommandButton put the time in the appropriate row.
View 4 Replies
View Related
Mar 12, 2007
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
View 9 Replies
View Related
Mar 12, 2013
IIn my example I have result data from the 2013 USPGA Tour, ordered by player (column A) with subsequent columns detailing their finishing position in each event.
I simply want to condense each player's performance data into one row - as doing it by hand after each event is very time-consuming.
Is there a way of using a simple formula, macro or pivot table (or whatever) to merge each player into one row, but keep each column in the same position (ie to correspond to each weekly event).
View 4 Replies
View Related
Jan 31, 2013
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
View 2 Replies
View Related
Mar 27, 2014
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies
View Related
Dec 11, 2009
I have an excel file with a single column that looks like this:
A
HYU
NVT
FYR
NUH
GFR
TRF
GXA
AKL
My question is how do i export the data out of excel so that I can have a text file that reads like this:
A,HYU,NVT,FYR,NUH,GFR,TRF,GXA,AKL
View 2 Replies
View Related
Mar 2, 2012
I am using Excel 2010.
I have a large spreadsheet with brands and volumes.
Many of the brands run the same processes, so I can consider them as one.
For example:
Brands - Volumes
A--------10
B--------16
C--------18
D--------20
E--------16
Imagine that A and C are basically the same. So the value that I really care about it (10 + 18) = 28
B and D are the same, so I care about (16+20) = 36
The output I need is:
A&C - 28
B&D - 36
E --- 16
Can I use SUMIF to basically say: Sum this IF =A OR or =B ?
Can I apply an IF function with concatenate to merge the A's with C's and B'd with D's?
The spreadsheet is large and this process will apply to many different groups of brands.
View 2 Replies
View Related
Jul 26, 2012
I have some data in a Excel 2007 workbook in the range a1:d100 and I want to sort the data according to "A" column, which is the first column of the range and when I am giving data sort it is prompting to select the column, where as in 2003 it will prompt to select the column but by default it will take the first column of the range, so if we want the first column the we can hit enter key otherwise need to change the column name which will save time.
My question is that whether there is any setting I can make at the time of sorting data and by default it will take the first column of the range.
View 1 Replies
View Related
