i have attached a sample for you to see what i am after.
I am after the following:
1. Export each column to a text file
2. Need the results from rows 2 - 30 in the text file.
3. Want it to save the files as row 1.
I have an excel spreadsheet laid out as:
A B C D E F G H I J K L M N O
1 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
2 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
3 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
4 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
5 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
I need a macro that can automatically export the cell data for each row from Column A--> O into it's own seperate text file, and name each text file with the text in column A. So again... everything in row 1 from A to O would be copied and pasted into a text file called (A1 cell data).txt
once that first text file has created, I was hoping that there could be a loop to automatically close the first text file and move on to row 2 and do the same, copy all text in row 2 from A to O into a new text file titled (A2 cell data).txt, close and move on to row 3 etc etc.
this is a large list of approximately 8,000 records.
Exporting data into multiple text files
My situation is the next:
I have one columm with 70000+ rows (starts from B3 to the final).
I need to copy the data every 10 rows and save it in multiple txt files, example:
B3:B12 ----> 00001-00010.txt
B13:B22 ---> 00011-00020.txt
B23:B32 ---> 00021-00030.txt
B33:B42 ---> 00031-00040.txt
and so on.....
the macro (TextMe.xls) of xlite almost does what I am looking for.
But, how to change it in order the macro does what I need?.
I need to create a function which will take a objectname (a query or table) and a file name format
The objective is to export this query or table into multiple text files each with a maximum of 1000 lines per text file. These files are used as an input for SAP - the interface only takes a maximum of 1000 lines per file.
I am having three issues with the code below.
1. How do I split an excel query based on line numbers? Is there a way to get the equivalent of ROW_NUM in oracle ? Or do I have to loop through it and maintain a counter?
2. What is the best way to split the file ? Loop within loop? I need the files to be tab separated (no header required)
3.The rst.RecordCount is acting strange - when I pass a name of the query - the property returns the right no. of rows, however when I pass a any table name it only returns 1 - is this the expected behavior - or am I missing something
Code:
Function ExportAsText(strObjectName As String, strFileName As String) As Long
' Purpose: Export any given query, table to mutliple files each of certain length
' the no. of lines per text file is defined by the config parameter SAP UPLOAD, LINE LIMIT PER TEXT FILE
' in the LKUP_CONFIG database
Dim db As DAO.Database 'This database
[Code] ..........
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
I have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5
I have some data that is both text and numbers in the same cell. I would like to split the the data so that the text is in one column and the numbers are in another column.
The numbers are all a fixed length (15 chars) so I know that I can use the following formula = RIGHT(A1,15)
However I am not quite sure how to split the text as the length can vary as as well as the number of words in the string.
For example A1 is 1 word with 7 characters but A2 is 2 words, 14 characters long inc space.
A1 Goodwin 000710280740120
A2 Gillette Ridge 000715058510122
B1 Goodwin
C1 000710280740120
B2 Gillette Ridge
C2 000715058510122
I have address that sits in one cell only and I need to separate into two or three columns (streetname, street number, streetletter).
Is this possible as the length of street text, numbers and letter differs all the time...
Attached is a sample file with before and after result
address.xls
I would like to "reverse concatenate" an address text string as follows: ....
View 9 Replies View RelatedI have thousands of lines of data that are of the following form:
Jackson, TN 9623 BCBS TN 98 UnitedHlthCare 2
Jacksonville, FL 3577 Aetna 47 BCBS FL 37
Knoxville, TN 3796 Cariten 44 John Deere 41
Lakeland-Winter Haven, FL 2165 UnitedHlthCare 31 Aetna 29
I need to separate these lines into columns such that, for example, the first line would be in 6 columns: (Jackson, TN) (9623) (BCBS TN) (98) (UnitedHlthCare) (2)
The delimiter does not work because some of there is no one character that always separates the text and the numbers. I've tried going through in word and typing something like '%' where I want to separate, but with thousands of lines of data that is extremely tedious.
Is there any formula I can use that would be capable of solving this?
I have a long column of info as below. I want to extract (the name changes)- "SEAPORT TWN" etc and also "01.30" and place into separate columns say G and H at the next available cell.
**
SWITCHLIST FOR TRAIN---Grain Spec -East
DEPARTURE TIME from WESTTOWN is 01:00
TOWN STOP---SEAPRT TWN Arriving at 01:30
PICKUPS
Terminal Shipping Burl North 460020 GRAINCAR empty Elevator Co. Ltd.
Terminal Shipping Sante Fe 100396 GRAINCAR empty Elevator Co. Ltd.
Train should leave this town with 2 car(s)
TOWN STOP---PRARIE TWN Arriving at 02:00
SETOUTS
Elevator Co. Ltd. Burl North 460020 GRAINCAR Grn w/Wht Lttrs -4 Bay
Elevator Co. Ltd. Sante Fe 100396 GRAINCAR Maroon w/Wht Ltr -3 Bay
1/05/2007 8:57:52 a.m. ...............................
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
I am trying to count the # of rows in a spreadsheet in which there is non-blank text data in 2 separate columns. For instance, if the spreadsheet looked like the one below (dashes just for formatting purposes):
NAMES-------THIS-------------THAT
Mary-------some text--------some more text
John-------<blanks>---------just text here
Sue--------just some here-----<blanks>
Dave-------something--------something else
Adam------<blanks>-----------<blanks>
The total # of rows with something in both the "THIS" and "THAT" columns above would therefore be 2.
I have a quoting application for damaged vehicles, this application is able to export all quotes and information relating to quotes into an excel sheet. the export file arranges the jobs in rows with each value in a separate cell i.e.
Job #|| Name || number || Parts $ || Total $
1453 || Mike K || 1234567 || 123.00 || 222.00
1533 || John C || 4353456 || 234.00 || 2342.00
Etc
Each job is listed on a separate row as it exports the records from an access database. once the information is exported I need to open another workbook and type in a job number into a cell and have excel automatically reference the relevant job and information relating to that job (all info in the same row) and fill in all the details from the other workbook into the new workbook. Example: the exported file contains 200 jobs, of those 200 i require 20 to view for one week. I have the job numbers of the jobs which I need to get information for. i open up another workbook and type in the 20 job numbers in separate rows and excel fills in the rest by referencing the other worksheet.
I am using SAP to export files to a spreadsheet for Excel 2004. Whenever I do this, there would be a problem with numbers.
For eg, there is reference ids available like 02651977 and when the files is opened from excel, these reference Id's will lose its 0. And it becomes and ID of 2651977.
I need help from here if any and fast.. Or else I will have to use concantations for batch of files for my whole life with 372648235417612536712 columns of data.
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
Export into multiple notepad files & force UTF-8 encoding .....
View 14 Replies View RelatedI'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have several separate Excel files that are all formatted in the same way.
I want all this data, excluding the header rows, from those separate Excel files, to appear in a new/designated Excel file. - I don't want to keep copying and pasting.
I also want the data, once extracted/copied/exported, to be formatted according the formatting style on the designated Excel file.
I have multiple files in a folder.
The files are named:
File1.xls
File2.xls
File3.xls
....and so on; the number of files varies. I am trying to write a macro, to combine all *.xls files in one workbook having each file as a separate worksheet.
I am sure the answer to this is out there somewhere but I haven't been able to find it. Thank you in advance for the help - I just can't figure it out.
I have several identically formatted worksheets (for different departments) with macros that reorganize the data in each sheet. I also have a list of managers with their respective departments in this same workbook.
I want a macro that will save these department sheets (values and formats only) in new workbooks - the manager's name - according to the list. I also need the macros that reorganize the data to work without referencing the original file.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
merging the multiple *.xls files into one single *.xls file but each *.xls file com in separate worksheet.
Say i have 30 xls files in datewise i.e., 01.10.10, 02.10.10, 03.10.10 so on....
I want to merge all the above 30 xls files in single file master workbook - in that master workbook file the above 30 xls should come in separate work sheets.
I am looking for the VBA code to copy worksheets (with formatting) and save to a specific folder. The steps I am need to follow are:
Create a copy of the first worksheet
Save it to a specified folder and name it with the worksheet name
Repeat with all worksheets until the end of the workbook
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
Hi everyone,
I've got several Excel files that need to be edited separately.
Once they have been edited, I need to paste the content of each file in a single separate Excel file.
Is there a way to retrieve the content from all the files in a folder, and merge it in a single file?
For example:
3 separate files > File1, File2, File3
Merged file, sheet1
File1
File2
File3
I need to create time sheets for about 30 contract workers.
Each time sheet needs to have their name as well the date for sunday of that week inserted into the form. (once the date for sunday is entered into the sheet, the rest of the dates for the week will be extrapolated out).
Then, once the data is inserted for a single worker, I need that file to be saved using the workers name in the file name.
The script would then open a new time sheet template, insert the second workers name and the date for sunday and save the file. Repeate for next 30 workers.
I want to export some columns of my worksheet to a csv-file. But i don't want to export all of them, i just need for example: Columns B, D and G and inside the csv-file they should be in an different order like G, B, D .
I already thought about using "union" to select the specific columns, but i can't get this to work.
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
I'm new to this forum and to VBA
First-off, I'm using Excel 2003 SP3.
The setup: A software application I regularly use produces csv data files (in this case approx 300 files). These I have converted to xls format using a separate macro. The files are in one folder and named as follows eg
G1 18800.xls
G1 18802.xls
G2 18975.xls
G3 19881.xls
G3 19990.xls
G5 19990.xls
etc
The files contain the following data:
DATE TIME VALUE STEPS EXCL ACCEL
01-Oct-03 08:00 0 0 FALSE 0
01-Oct-03 08:01 0 0 FALSE 0
01-Oct-03 08:02 0 0 FALSE 0
01-Oct-03 08:03 0 0 FALSE 0
01-Oct-03 08:04 757 20 FALSE 0.18
01-Oct-03 08:05 1714 32 FALSE 0.44
01-Oct-03 08:06 1524 32 FALSE 0.39
01-Oct-03 08:07 1665 45 FALSE 0.47
01-Oct-03 08:08 1644 42 FALSE 0.46
01-Oct-03 08:09 263 8 FALSE 0.06
etc
I then created a macro using code I sourced from the internet, and included some addtional commands (filename, copy/paste). See below. This macro opens the all the xls data files in the folder and copies the relevant data to an analysis workbook [Analysis sheet, Results sheet, Master sheet] ie the data is copied from the data file and pasted into the Analysis worksheet. Then the results are copied from the Results sheet to the Master sheet. So far so everything works.
My problem is this: I'm stumped at how to delete rows from the xls data files before running the analysis workbook and macro. In other words, after converting the csv files to xls format I need to clean the xls data files.
I have a separate xls file with criteria data in two columns:
FileName Date
G1 18800 06-Oct-03
G1 18801 02-Oct-03
G1 18801 03-Oct-03
G1 18801 05-Oct-03
G2 18795 14-Oct-03
G2 18795 15-Oct-03
G2 18795 16-Oct-03
G2 18795 17-Oct-03
etc
The rows in a particular data file, with dates that are not present in the Criteria workbook must be deleted. This to be done for every data file in the folder. Also, I need to exclude rows for specific time periods eg 12H00AM - 04H00AM from all the files irrespective of date.
the code needed [should a separate macro be run or can code be placed within the present macro?]. I've tried looking for something similar on the internet, but my requirements seem too customized to be able to adapt the code that I found. And of course this is waaaay above my present skill level!
Option Explicit
Sub CopyPaste()
'This code opens up data files (xls) in a specified folder and copies data A1:G17281 to an Analysis workbook (Analysis sheet).
'The data from the Results sheet is then copied to the Master sheet.
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim wkbSource As Workbook
Dim wksSource As Worksheet
Dim MyPath As String
Dim MyFile As String
[Code]...