Find Value And Copy Related Values
May 21, 2008
I am building a Macro which can be found underneath. The red code is not working right now and I am looking for alternatives to solve this error but until now I haven't found none.
Basically, I am looking for a correct code to copy files from a sheet to another sheet with a find macro.
Sub vinden()
Dim FindString As String
Dim Rng As Range
FindString = Range("A21")
If Trim(FindString) <> "" Then
With Sheets("Voorraadverloop").Range("A1:IV65536")
View 9 Replies
ADVERTISEMENT
Mar 30, 2008
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
View 9 Replies
View Related
Jun 29, 2009
(Thread: Max array with multiple columns) I got the following array formula:
{=MAX((A45:A47=A28)*(B45:D47))}
Here, where the value in A45:A47 is equal to A28, the maximum value is pulled from the same row, within cells B45:D47.
e.g.
A28 = Apples
A45 = Pears
A46 = Apples
A47 = Bananas
B46 = 10
C46 = 20
D46 = 23
The formula returns 23.
This is great. However, in order to control for a potential situation that will arise, I need to adjust this to find the first matching value within the data set. I do not know what the MAX should change to in order to find the first matching value.
Using the above example, if the data was now:
A45 = Apples
A46 = Pears
A47 = Apples
B46 = 10
C46 = 20
D46 = 23
How do you get the formula to return 10?
The position of "Apples" will change, hence the need for an array formula.
View 9 Replies
View Related
Apr 16, 2014
I have a table in format below, I want show a third column with sum of w.r.t the minute, so for time 2:10 ,
i want to show 10 which is sum of first four values.
Started DB request
2:10:00 2
2:10:11 3
2:10:11 4
2:10:13 1
2:11:10 3
2:11:11 2
2:11:12 1
2:12:10 1
2:12:12 2
2:12:12 2
2:12:13 1
2:13:11 1
2:13:12 1
View 4 Replies
View Related
Jan 8, 2009
I have two worksheets. One contains my master data and the other my look up table.
Master Data: ....
View 9 Replies
View Related
Feb 24, 2007
I have an inventory sheet that uses multiple userform comboboxes to input data to a sheet. Everything works great except on one userform "pullmat" where the user removes inventory from a unique list of all material available in "Master Log" sheet. The combobox that im trying to fix is "combobox3" in the "pullmat" userform. I'm trying to get that combobox to only show P.O. numbers that are related to the material selected in the "Material Code / Name- combobox2. In other words, the user should only be able to select a P.O.# that matches that specific material on the Master Log sheet.
The file size is too large to attach but I can email a copy if needed.
View 3 Replies
View Related
Mar 25, 2012
I am trying to put a message box related to a cell if a threshold values is reached.
E.g.: Cell A: 85
If cell A values moves to 86 I am trying to put in a message that says something like " This value is not allowed". Is there a way to do this ?
View 8 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Aug 6, 2007
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
View 7 Replies
View Related
May 4, 2006
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
View 9 Replies
View Related
Aug 2, 2006
I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........
View 3 Replies
View Related
Aug 10, 2006
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles
'blah blah blah get filenames
'filename of new workbook = outputFileName
'worksheet name in new workbook = Cumulative Record Data
'filename of data workbook = dataFileName
'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
View 9 Replies
View Related
Jul 11, 2014
See attached spreadsheet for reference : MacroHelp.xlsx‎
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
View 2 Replies
View Related
Aug 16, 2007
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
View 6 Replies
View Related
Aug 6, 2012
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
View 5 Replies
View Related
Jan 7, 2013
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
View 2 Replies
View Related
Oct 31, 2009
I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....
View 7 Replies
View Related
Dec 3, 2007
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
View 4 Replies
View Related
Jul 31, 2008
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
View 7 Replies
View Related
May 23, 2009
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
View 2 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Apr 30, 2014
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
View 1 Replies
View Related
Jul 2, 2009
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
View 3 Replies
View Related
Feb 11, 2013
compare some list of values in order to fiind the common values.
View 1 Replies
View Related
May 10, 2013
I have a task to rank the stocks from the highest price to the lowest price. I've made a template and managed to get the ranking right. I used the LARGE() function.
But now the difficulty is to get the 'Stock name' related to the ranked price. I may do it with the MATCH() function. But the problem is there is an equal number 15%.
Can you have a look at the example attached here?
View 5 Replies
View Related
Jul 18, 2006
I've tried LOOKUP, HLOOKUP, VLOOKUP, MATCH, SUMIF, ETC... Nothing working correctly. Here's what I need the function/formula to do: Find a # number value in column C, and then whatever text in another column ( range) I specify (like column A) corresponds with that same ROW. For example: VALUE: $40.00
1. Search column C3:C40 to look for $40.00- let's say it finds the value $40.00 in cell C21.
2. In cell A21 there is text "Gena's Sales".
I want the new cell the return a value of "Gena's Sales" because the $40.00 is in the same ROW as "Gena's Sales."
I think the reason I'm having such a problem is because it's numbers and text combined, and also LOOKUP does this "ascending order" thing that screws up the output. I'm getting values with LOOKUP from column A, just not the right ones. I don't need any ascending or descending orders. I just need to find the value in a range, then find the text in another range in the same ROW.
View 2 Replies
View Related
Aug 21, 2008
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
View 9 Replies
View Related
Oct 13, 2006
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
View 2 Replies
View Related
Aug 26, 2008
I have a vehicle intake-form in which users have to enter vehicle data.
I also have a huge list containing make/model information.
I would like to be able to use this database in the following way : I want the user to select the make in cell A1 , and then the model in cell B1. It must be possible to choose for example the make "BMW" in cell A1 and then cell B1 should only display the BMW models, and not all others that are present in the list...
I tried to use Data Validation with a list of choices, this works fine for the make (A1) ; but how do I make the list used for Data Validation on B1 dynamically related to the value in cell A1 !
View 7 Replies
View Related
Aug 12, 2006
is it possible to set up a form (or any method) that would let me input a name (from my workbook) that would then "pull" up details about that name. I am thinking of making a staff holiday planner. This would have a column of names, holiday entitlement,days brought forward etc and columns that have a year (daily) calendar.
View 2 Replies
View Related
