I am inserting data into my spreadsheet using VBA code to read a file and insert the data into the relevant cells. My problem arises when I have a string such as 80830410205724044. The actual code that inserts the data is as shown (temp is dimmed as string)....
View 9 RepliesI need to list 4 digit numbers in each section followed by commas, but whatever I do it goes to 3digits (e.g. I need "1234,5678,9123" and as soon as I hit Enter it goes to "123,456,789,123"). It wont work to format as text because I have a whole bunch of 12 digit numbers to break up into 4.
View 9 Replies View RelatedI have the following working great, but would like to see it refine a little, as the data vlookup is 6 digits, but i only needs the last 4 digits is enough for me to work, my question is how do i go about adding that to the following function i have implemented and working fine.
=IF(ISERROR(VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)),"",VLOOKUP(B4,' cmfs01home$peter[tracker data 4-25-14-a.xlsx]ControlSheet'!$B$2:$F$301,4,FALSE)
I have a column with social security numbers, i.e. 555-33-2222 and I need to change to show only the last four digits, i.e. xxx-xx-2222. Can this be done in excel?
View 4 Replies View RelatedIf I enter 2.5 into a cell, and then change the format so that there are no digits after the decimal, the number changes to a 3.
2.4 correctly rounds to 2, but shouldn't 2.5 round to 2???
I thought that even numbers were supposed to round down, and odd numbers round up when there is a 5 right after the decimal.
I have a calculated field which is essentially two concatenated values (DDMMYY and sequential numbers starting from 1). I want it so that any single digits will automatically have a zero in front (e.g. 01, 02, 03 etc). The concatenating takes place in VBA so it has to be coded...
View 3 Replies View Relatedin A1 I have a drop down list with unit numbers and descriptions
example - 123456 - 30 to 150 lots
I want to see if when I pick from the drop down list the right unit and description that the cell will only show the first 5 digits.
example I pick 123456 - 30 to 150 lots in cell A1 would say 123456
I have a excel file, I need to remove the first two digits if they are certain numbers, such as 12. For example, if the number is 12987654, then I need remove 12, and it will be "987654" , but if it is not 12 in the first two digits, then keep it no change, for example if it is 345678, then keep it.
I barely work with Excel formulas, now I need connect the excel file with my Database table. I need to make the file matches the DB.
Example numbers:
21130 & 21065
I want to check each number if EITHER of the two conditions is true:
1. if the third digit from the right (the hundreth place) is greater than zero;
or
2. if the second digit from the right (the tens place) is >=6.
If either is true I want to add a particular number to the original number.
My example numbers meet questions 1 & 2, respectively.
this may be simple but I need to convent say
A1 = 09
B1 = 23
into
C1 = 0
D1 = 9
E1 = 2
F1 = 3
..etc
I have a unique 6 digit number in a column. I have 2500 rows. I need to cut the first three numbers only leaving the last 3 numbers in the column for each row.
Example:
112345
234325
I would need 112, and 234 deleted. Checked the forum and cannot get quite what I want.
I have a column with numbers in about 500 rows. The entries are 5 numbers long and others 8. So I thought i could use one of the following: A macro code to tell a cell to delete the first 3 numbers if the entry is 8 numbers long?
OR
A macro code to tell a cell to reduce itself to 5 digits long starting from the right? Attached is a small example
How to convert any types format into Text with 5 digits in selection?
For instance, the content I select is "234", and I want it to convert to "00234". Just like the function "TEXT" in excel. How can I realize it promptly in VBA?
I need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers
View 14 Replies View RelatedI would like to extract numbers based on the first 2 digits (22....) of a column along with its next column (on the right) and put them on another sheet.
View 9 Replies View RelatedI have a UPC list. Some are more than 12 digits, and some with less than 12 digits. I need to make sure there are 12 digits in each UPC. I know how to count using LEN, strip leading zeros of those UPCs that are >12 digits using RIGHT.
What I need now is any number with less than 12 digits, such as 000123, add a 4 to the beginning (4000123) and fill in '0's in between the 4 and the short UPC number to make 12 digits, 400000000123. They vary from 1 to 13 digits.
I have some numbers around 200 numbers which are not same digits i.e. if 1st number is 7 digits, 2nd number is of 10 digits.
Like this even if i have a number of 1 or 2 digits then all number should have equal digits i.e. in 200 numbers if one numbers is of 13 digits then all the numbers should be 13 digits.
To do this first i am doing this to the right align & comparison all numbers & taking the highest digit number & pre-fixing the other numbers with zeros’ so that all number are equal in number of digits. This is taking huge time.
I want to make a macro or any easy method so that all should have equal no of digits.
I want that if 200 numbers are pasted in the column E i.e. from E2 to E201 then all should be converted to equal digits number by prefixing zeros & should appear in column G from G2 to G201.
And after converting them it should be prefixed with D/ OR D/ABC:
This will be present in B2 cell i.e. this cell will be blank always. And once I have any thing in that cell that should be prefixed to the converted numbers in the column G & they should appear in Column I.
And again the numbers in column G should be prefixed with the content in B2 & should appear in column K in the Ascending order sorted.
Suppose if , I have 500 numbers then they should be converted automatically to equal digits & appear in Column G & prefixed with the contented in cell B2 should appear in Column I & sorted series in ascending order with prefixed with cell B2 in the column K.
And if I have 15 numbers only then it should do the same job easily. Here the numbers of numbers are not defined.
All this should be get done on click of the command button.
I have a macro that copies long decimals (11 places) from an Excel file to a CSV file. However, the long decimals often get truncated from 11 places down to 3 or 4. I've tried a number of different coding methods to combat this, the most recent and most successful of which is shown below
Application.Workbooks.Open Filename:="C:...2008_alldata.csv"
Cells.Select
Selection.ClearContents
ActiveWindow.ActivateNext
Application.Goto Reference:="AllDataTable"
Selection.Copy
ActiveWindow.ActivateNext
Application.Goto Reference:="R1C1"
Selection.PasteSpecial Paste:=xlPasteValues
Range("R2:BI5000").Select
Selection.NumberFormat = "#,##0.00000000000"
ActiveWorkbook.Save
ActiveWindow.Close savechanges:=False
However, sometimes this method also fails. Is there a better way anyone knows of to ensure that the entire decimal is copied?
I am trying to filter my excel sheet based on certain digits in a column of part numbers. The part number has 10 characters. I would like to filter it so that all part numbers where the 4th character is the number 5 or 7 is listed and where the 5th character is a zero. (i.e. R4X5831310 is a part number where 5 is the 4th character; I would like the filter to show this part number)
View 2 Replies View Relatedvb code that will break out each 6 digit media used in their own rows such as in the illustration below.
Sample data before macro
Master Backup
GTI - Hostname
[Code]....
I have a column that has section numbers like 001.002.006.003.010.011.002.
I would like to divide that single column into seven columns with only the single or double digit in it, ie
1 in a cell
2 in a cell
6 in a cell
3 in a cell
10 in a cell
11 in a cell
2 in a cell
Have been using MID and FIND togther, but when I get to the double digits like 10 an 11 I run into problems.
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I have a row with values in successive cells. Some cells are blank. I want to conditionally format the cell text colour based on the value compared to the previous populated cell (i.e. compare A3 to A2. If A2 is blank, compare it to A1).
View 9 Replies View RelatedI have a set number that I need to allocate over a flexible period of say 5 -11 days.
I have applied the traditional split per day to each number i.e. a monday normally results in 20% of transactions, Tuesday 25% etc.
The issue comes in when I try to allocate the budget over a period longer or shorter than a week.
Therefore the budget for the 9 days is being allocated over the period of 9 days which results in a overall allocation of 150%. (duplicate mondays etc).
Is there a way to limit the entire period to a set number and have the numbers adjust themselves accordingly up or down to match it other than multiplying it by a factor?
Example attached: Excel Problem.xlsx
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View RelatedI have the attached table of numbers and I need a formula at the end of each column to identify whether any cells in that column consecutively have numbers in them greater than zero. Ideally by a count of how many cells in the column have consecutive numbers greater than zero (so if there are three 1's in a row and then a zero and then another 2 1's I want it to count 5).Excel Help.xlsx
View 2 Replies View RelatedI can not remember how to do the following. in column N have numbers ranging from 1 to 100. I need to get numbers counted in this grouping. >50, <50 >70, <70 >85, <85. I don't even remember how to start. I tried
View 2 Replies View RelatedI am trying to average a column of numbers. I want to only average the cells
that contain a number greater than 0.
How do I count cells with numbers 1 and greater. My cells are counting the -. All my cells are showing the - (zero value) but are being counted.
View 12 Replies View Related"in Excel" - my formula for cell C11 is: "What percentage of the time (occurrences) was the value in cell B11 greater than the values in A1 thru A10?"
As in...:
100
99
98
97
96
95
94
93
92
91
90...95.....40%
89...16.......0%
88...123...100%
87...90......20%
So no data in first 10 rows of Col B. (Or Col C, of course.) Then for the value that appears in B11, how many times (out of 10, in this example for sake of ease) was that value greater than the entries in the first ten entries in Col A:
95 (cell B11) was greater than A10, A9, A8 and A7 (91, 92, 93 and 94). So 4 times out of 10, B11 was greater; 40% is the answer the formula would yield.
16 was never greater than any entries in A2 thru A11, so 0%.
And 123 was greater than all the entries in A3 thru A12, so 100%. Etc, copied down the sheet...