Formula Auditing Links To Other Workbook
Sep 1, 2006
I am working with a workbook, which has links pointing to many other workbooks. Many a times, I need to open the source workbook to verify whether the source data is correct. It takes a long time to open the other files and locate the exact cell. Following is an example of the links in the workbook.
'W:CentralMMonitoringResearch[Dallas.xls]CONSUMERS'!AH13
Some cells are linked to the sheets in the same workbook. I know that I can use Excel's audit function, but I found that it doesn't work well when the formula referes to other workbooks. Therefore I want to design a macro, which will land me to source cells. The macro needs to analyse the link; open the workbook to which the link refers; and find the correct cell in that workbook. If the link refers to a worksheet in the same workbook, then it should not open that workbook again. I don't know, how to use a link like the one given above, and analyse it using VBA to decide whether it needs to open another workbook.
View 5 Replies
ADVERTISEMENT
Feb 15, 2008
I want to stop the formula auditing from working in one workbook without having to change settings in excel, is this possible?
View 3 Replies
View Related
Apr 28, 2007
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies
View Related
May 21, 2008
Is there a function of formula in Excel that will show me which cells are protected. I have a worksheet that needs certain cells to be protected. I don't know how i can get on good look to see if the are all protected.
Is there a conditional formatting formula possible.
View 9 Replies
View Related
Dec 5, 2007
I have a workbook linked to another one. When I try to change the links to another book, I get a message ' the cell orchart your are trying to change is protected and therefore read only". I have checked and doubled checked and cannot find any worksheet that is protected. How can I find the problem cell or change the link to another book? I have the password but cannot find the worksheet?
View 2 Replies
View Related
Jul 20, 2012
I have a workbook with a few worksheets. In sheet1 I have a few ranges which are linked to different parts in the other excel sheets.
Is there anyway to check if a range is being used as a link in another sheet.
Eg.
In sheet1 , A1 i have a value Apple.
In sheet2, A1 I have linked it to sheet1 A1.
is it possible to detect the link in sheet2 A1 from Sheet1 A1? I tried using Trace dependents but all it shows me is the link symbol? An arrow with a small excel sheet.
View 1 Replies
View Related
Nov 18, 2008
I have a workbook with a ton of links to other tabs, but all links and tabs are within the workbook (none to other documents). I've found that a lot of the links are no longer working. This document is only a month old, so it's not outdated or anything. i find myself having to go back and re-link everything. This is a big file...i understand if i have to re-link everything once, but i'm worried that the links will "break" again.
does anyone know why these links within a workbook are not working? is it something i have to fix in the Options?
View 9 Replies
View Related
Jan 22, 2007
Somehwere in a review of your book, it referred to an add-in that attempts to break all links to a workbook. I looked on the site (microsoft) with the provided URL but could not find it. Is it still there? Does it work for EXCEL 2002?
View 4 Replies
View Related
Nov 23, 2009
I want to move the workbook I have created to a different folder on the same drive. The workbook is pretty big and has loads of links to other workbooks. If I move it will all of these links fail and if so will I have to manually reset them all? I guess I am asking if there is specific method of moving workbooks which will automatically change the links to the cope with the new location?
View 3 Replies
View Related
Jan 23, 2014
My files always says this "This workbook contains links to other data sources" update.....how can I turn this off?
View 1 Replies
View Related
Aug 12, 2009
I have a workbook that has many cells that link to a server on the other side of the planet. If I manually open this workbook I get the "This workbook contains links to other data sources." And the option to "Update" or "Don't Update"
If I choose to not update, everything works great. If I choose to update, the worksheet takes 10-15 minutes to open. I have tried to go to tools-->options-->Edit and uncheck "ask to update automatic links" but this makes the default behavior updating. I want to open this workbook using a scheduled task and a batch file, and have it not update, and then run a macro. Any suggestions on how to do this?
View 4 Replies
View Related
Jul 10, 2014
I have an excel file with column stating month and rows are phases ... for each Phases we add the revenue numbers by month and it does keep changes as and when scope changes. However, i am finding it difficult to capture the changes ... is there a way i can set the guidelines to ensure all historical data changes as and when any updates and it should store the historic inputs for consolidation ... i would like to be called as Baseline, Re-baseline1, Re-beseline2 like wise.
Sample attached : sample_auditing.xlsx
View 13 Replies
View Related
Dec 28, 2007
On choosing Auditing Funtion, Trace Dependants, a small icon representing a spreadsheet ? appears at the end of a dashed line. What does this refer to?
View 3 Replies
View Related
May 21, 2014
I am new in VBA, but I have a short procedure to break all external links in the currently active workbook.Is there any option to firstly update all external links and only then break them?
Sub BreakLinks()
Dim Links As Variant
Dim i As Integer
With ActiveWorkbook
Links = .LinkSources(xlExcelLinks)
If Not IsEmpty(Links) Then
For i = 1 To UBound(Links)
[Code]....
View 5 Replies
View Related
Dec 10, 2009
I have a workbook that links out to numerous other workbooks for current data. After one of the supporting workbooks gets up dated, I return to the master workbook.
Here, I need to see the updated results. The only way that I can find a way of updating the master is to close and save it and then re-open.
Is there a way of updating the master workbook using a macro?
View 14 Replies
View Related
Jul 19, 2006
My first post at last.
I've recorded a Get External Data macro and wish to modify source and destination components. I would like to replace the absolute link to the file name with a variable and the Destination range to the active cell at the time I run the macro.
This is the is the macro code line that handles the source and destination components I want to modify.
Range("AQ2").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;C:filename.csv", Destination:=Range("AQ2"))
View 3 Replies
View Related
Sep 28, 2006
I am having a workbook in server, it consists more than 12 sheets. Everyday in the early morning it need to be get updated, (i.e) normally when i open the file, it as for the Password (password for workbook), then after I given it will show three buttons Update Don't Update Help, so i need to press the Update Button , it should be done everyday in the early moring.
Is there any way to do this automatically open and update and close everday through vba code or anyother ways.
View 9 Replies
View Related
Feb 3, 2007
I have a macro where I try to edit the links after I open the workbook. I used the macro recorder to get the code, and if I use it, it works great. However, when I try to insert some variables in the code, I get an error saying "Method 'ChangeLink' of object'_Workbook' failed. I don't know why I'm getting this error. Below is code.
Sub MyCode
Dim VarianceMonth As Variant
VarianceMonth = VarianceReport.cboMonth.ListIndex + 1
Windows(VarianceMonth & "_2007 Forecast (LGBU).xls").Activate
ActiveWorkbook.ChangeLink Name:= _
"\sf1d3shareLGBU_ FinanceAdministrative ReportsMonthly Forecasts" & VarianceMonth & "_2007" & VarianceMonth - 1 & "_2007 Forecast (Ancillary).xls" _
, NewName:= _
"\sf1d3shareLGBU_ FinanceAdministrative ReportsMonthly Forecasts" & VarianceMonth & "_2007" & variancmeonth & "_2007 Forecast (Ancillary).xls" _
, Type:=xlExcelLinks
View 9 Replies
View Related
Sep 23, 2007
I am try to copy a worksheet "exactly" from one workbook to another, i.e. all formulas and range names reference the new workbook and not link back to to the workbook they were copied from. The code below brings the formulas and named ranges over still referencing the source workbook: SourceWB.Sheets(sht).Copy after:=TargetWB.Sheets(sht)
View 3 Replies
View Related
May 21, 2013
I'im using an index - match - match formula with links to an external file.
Everything works fine until I close the source workbook. At that moment the liks break. The error I'm getting is #REF!.
I suspect the reason is that the source data are in form of an official table. I tried some formulas with data in the same workbook but outside the table and they keep working after the source file is closed.
I really want to keep the source data in a form of an official excel table.
View 6 Replies
View Related
Aug 8, 2013
I have several hundred workbooks which are linked to a master workbook from where the workbooks draw their information. Now I would like to break all the links in all of the several hundred workbooks to this master workbook and retain the information. Is this possible without having to open each workbook individually and break the links via the 'edit links' option?
View 1 Replies
View Related
Mar 24, 2014
I built a template which pulls data from the source file using formulas. the problem is formulas doesn't give any error it updates the right value when the source workbook is open.
I Thought problem could be with the formula and tried just Source A1=destination A1. it also updates only if the source file is open. when the source file is closed it shows the last captured value.
The source file is on the (Work) Network Drive and is accessible to few people. my template is password protected (tabs) so formulas cannot be deleted.
View 1 Replies
View Related
Oct 18, 2012
I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.
View 3 Replies
View Related
Sep 8, 2006
When ever I open a file a message comes up reading "This workbook contains links to other data sources" and then asks me wethere I wasnt to update or not. Well I don't want people to see this when they run a Macro I have created. So what I would like to know is if there is some code that I can add into the macro that will either disable that message or somehow always answer "dont update" everytime that message comes up so that the user wont have to be bothered with it.
View 9 Replies
View Related
May 28, 2007
Does anyone have any code to put in Workbook_Open module that can get rid of this message that says "The workbook contains automatic links ......." and default the selection to Yes when asked if I want to update all linked information?
I tried this but it doesnt work ...
Private Sub Workbook_Open ()
Application.DisplayAlerts = False
.........
End Sub
View 4 Replies
View Related
Jul 24, 2007
Currently I am using VBA Code below to Stop Update links prompts
Private Sub Workbook_Open()
Workbooks.Open "C:TempBook2.xls", UpdateLinks:=False
End Sub
Is there code I can use such This Workbook so that I can save this file as another name and it will work? Biz Auto Merged Post;Dear All, I have found VBA code that works.
Private Sub Workbook_Open()
Workbooks.Open ThisWorkbook.Name, UpdateLinks:=False
End Sub
View 3 Replies
View Related
Jul 22, 2009
I have a spreadsheet that tracks Auditing Dates. Cell A1 has today's date =Today()
Column B2 has the first Audit Date (hard keyed), cell C2 has the second Audit Date (formula =+B2+182), cell D2 has the third Audit date (formula =+C2+182), etc. . . I would like the format of the Audit dates to flag the last audit date in the row red if it is prior to today's date (cell A1).
View 9 Replies
View Related
May 31, 2013
I'd prefer to edit links with the source workbook open, however I receive this error when I do "A formula in this worksheet contains one or more invalid references." I am able to edit links with the source workbook closed but this takes far too much time to be satisfied with that as the solution. I have used vlookup formulas and the index-match method and they both take about the same amount of time to update. I've separated each worksheet and used the "name manager" add-in and have searched all links for any type of error. I feel like I'm missing something. Is there a way to fix this "invalid reference" error so that I can edit my links with the source workbook open?
View 1 Replies
View Related
Apr 4, 2008
The situation is that I have created a workbook in a network folder: xprojectsexcelclientAApril
umbers
The workbook links to a few other workbooks on the same network, but in the parent folder: xprojectsexcelclientAApril
The problem occurs when my colleagues have to updates the links in the main workbook, because they have not mapped the network drive in the same way as I have. The problem is NOT the prefix, but the fact that they have a more direct link to the network folder. My collages have mapped the folder like: xclientAApril
Is there a way where I can make the links in the workbook, so they don't depend on the entire string, but only on the fact that it is in the parent folder?
View 3 Replies
View Related
Jul 29, 2014
I'm looking for a formula that links different conditions together.
For example, I'm entering the formula into G9 and I want the formula to be if G7 is equal or greater to G16 then the answer should be 30, if not then the answer is 0.
Simple enough I know this is my formula to use "=IF(G7>=G16,30,0)" but I want it to look past that.
Basically I want it to say if G7 is equal or greater to G16 then the answer is 30, if not it's 0 BUT if G7 is equal to greater than G17 my answer is 60 BUT if my answer is equal to or greater than G18 my answer is 120.
G17 will always be a larger number than G16, and G18 will always be a larger number than G17.
View 3 Replies
View Related
