Formula To Count Based On Various Different Sections
Nov 10, 2009
I have a summary sheet with a table and it needs to show how many people have 14 or more hours available based on a few reports. This is split by different levels (i.e Manager, Senior Manager etc) and various different areas.
The reports are placed in seperate sheets and i need the table to be automatically updated via either a formula or macro, rather then the manual process of going through each sheet and having to filter and then count.
I am setting up a template to use to track candidates throughout their lifecycle. I am also creating a 'summary report' on another worksheet that counts total number of candidates, counts the number of candidates that have been submitted to the client, count of the number of candidates that have been interviewed by the client, etc.
How do I count the number of candidates in the spreadsheet?
In Cells A6:B5, I have "Submitted" In Cells A7-?? I have dates for those candidates that have been submitted. Then a new section titled, "In Process" A list of candidates are contained within that section. Then a new section titled, "For Review" etc.
There are multiple sections, so the date in Column A1 may not always be in a constant row, as it depends on how many candidates are within a certain 'phase'.
I have a column I5, titled "Status" This column has a built in drop-down list that contains pre-defined status, for example, "Submitted", "Candidate Declined", "2nd Message Sent", etc. I need to be able to create a summary report based on a count of candidates that fit certain 'Statuses'. For example, count the number of candidates that were Interviewed. This could be a combination of Statuses: Phone screen with client, 1st F2F, 2nd F2F, etc.
(At home, I am using Excel 2003. At work, I am using Excel 2007. So if it's easier to create in Excel 2007, that's fine.)
I created a spreadsheet which I would like for it to track trainings based on days, I added an =COUNTA(A1:A100) formula which counts the amount of people trained but what happens is that it counts people trained all week long. I want it to be able to differentiate days and display the amount of people trained per day , Ex. 4 on Mon, 5 of Tue , 6 on Wed, etc
What I require : Column F to be blank as long as the following is true:
1) Column A (Order) cannot be blank. 2) Column E (Status) has to be equal to either "Completed" or "Successful". 3) Column D (Sales) has to have the same date as Column C (Contact), but due to bad data quality each order number can have several rows and as long as the Sale date from one of the other "Duplicate" rows equals the contact date it needs to be counted. This is as long as there is not already a row for the Order that already has Sales / Contact day matching.
In the attached spreadsheet, I have highlighted the rows that should be blank in column F in green. My attempts at formulas to count this are in the columns highlighted in red.
I've found a # of threads on this subject but have been unable to find the function I need.
I've got a spreadsheet (attached) to calculate vacation time, but I can't figure out how to make the used time reset on an anniversay date. For example, if Employee 1 has earned 80 hours of vacation but only used 40 by his 4 year anniversary date, how do I make unused time roll back to 80 the day of his anniversary?
Here's the structure: 2 Personal days given Jan. 1, then 2 more on July 1 to employees here at least 6 months. Those whose 6 months fall after or between are awarded 2 days on their anniversary then accrue as normal. Unused personal days are lost at the end of the year. Vacation time is 40 hours after 1 year, 80 hours at 3 yrs, then 120 hours at 5+.
I can't seem to get a formula to work. I am trying to count the number of times "EE" shows up in a range only if "CR" is listed in that row within another range. For simplicity Column A has a list with the following values scattered from A2 through A100: CR, LT, ST, DI. Column B has a list with the following values scattered from B2 through B100: EE, EF, EG.
I need to know how many EE's are listed in column B if CR is on the same line in column A.
I want the formula to count the different numbers in the second column based on the first column. The results should show, 972 equals 3, 214 equals 1, 765 equals 2.
I am trying to separate this out but it keeps putting this paragraph.
I'm using this formula to count how many times the date in column C and the text "WON" appears in column I and it falls within the month & year that is in Z65.
I know there's a pretty compley formula out there that counts the occurence of say Fridays in 2009 - does anyone have this? I had it before in a file but ranged valued the results showing the count of each day of the week for each month in a given year.
I have an excel spreadsheet which calculates the count and value of line items based on a report. I use the sumproduct function to calculate this as it involves multiple criteria. The formula is use is
I think the possible error is coming out of this criteria (LEFT('Report 50'!$S$2:$S$64992,14)="credit transfe")
Out of one particular field i am picking those line items in which the first 14 characters are "Credit Transfe", if i eliminate this criteria i dont get error.
But this is the main criteria for my calculation. Most of the time i dont get any error , but sometines i get the # Name Error? When i double click on the cell it goes to one column. I dont know what to do from there.
The equation is basically: 10^[A/20]+10^[B/20]+10^[C/20]. Now imagine that there is no input value for C. I need to make it so that it won't add the bit I've highlighted in green.
i have 7 columns from A to E of horse racing data.
Col A is Date, B is Time, C is number of horses in the race, D is the result placing E is the Odds
The data is in Date order and then by time then by order of place eg 1st 2nd 3rd etc
I am trying to sort the data by Odds for each race
Pseudo code would be;
Read Cell C2 (the start of the data) to determine the number of runners (example answer 10) Select range Rows A2:A12 (10 rows from data in C2) Sort Selection by column E[code]...
I wish the above pseudo code works as it seems so simple
I have a user form with a button to clear the entire form on a click. I also have the form seperated into 2 frames, how do I set a button to clear only one of the two frames. Also how do I set a button to clear one text box on a frame? I know it must be simple, but I can't seem to figure it out.
CompanyCodePropertyCount of StegdiwSum of WidgetsCompany XYZ
Example 1XXXXXX10.00Example 1 Total10.00 Example 2ZZZXXX22.00XXXZZZZ22.00Example 2 Total44.00 Example 3QQQZZZ33.00ZZZQQQ33.00QQQXXX33.00Example 3 Total99.00COMPANY XYZ Total1413
I am recreating a pivot table made by a prior user using new data. I have been able to figure out the format. But I would also like to color the sections in the same way, similar to that show above. How to color different sections of a pivot table?
My question is can I use cpu clock or some other means temporarily as an indicator before and after sections of code to display run speed until I find the best optimised code solution.
In my spreadsheet (27,000 + rows), there are sections (multiple rows) that are duplicates of other sections. A section is a header row followed by other rows of data.
The number of rows in each in section can vary from 5-20 – therefore, you cannot use the number of rows as a criteria.
However, each section has a header row that contains a four digit number. The following is an example of two such sections:
Basic -- Zero Line ==> Zero Line ID=7076 (submitted by Calvin Campbell)
Star Thru
Pass Thru
Trade By
Star Thru
one half Square Thru
[Code] ..........
As you will notice the header row contains an ID number. Every header contains “ID=” followed by the four digit ID number.
I need a macro that will identify the duplicate IDs and their sections and delete the duplicate rows of data.
I mention the following – which may or may not be useful. - Not only are the header rows duplicates but the content of the entire section is duplicate - There are no blank rows in the spreadsheet - Entire rows may be deleted (not just specific cells) - The data will be in Column A - There’s only one duplicate of any given ID
There are a total of 2716 sections. It has been determined that 201 of them are duplicates. I can provide the 201 duplicate ID’s if needed.
I want to convert multiple sections that contains formulas to values. Usually i did this by coping range of cells, and paste as Values. But now i have multilple sections and excel doesn't allowe me to copy multiple sections. (i can not use clipboard, because there are more than 2.5 k rows)
I am using Excel 2010 64-bit (with SP2 and all other updates installed).
I have a worksheet where some cells have a yellow background, based on conditional formatting of what is in column A. (Note that data in column A changes, so the row can sometimes be yellow and sometimes be white.)
I need to sort this worksheet as follows:
1. By background color, so yellow is on top, white is on bottom. 2. Then, within the yellow rows, data in column J. 3. Then, within the white rows, data in column A.
Currently, I do this manually by sorting the entire worksheet by column A, then selecting only those rows that are yellow and sorting by column J.
Is there a way to combine these steps, perhaps with a macro?
I initially thought to make each "background color" its own table, but since column A can change and thus the background color of a row can change, I need to be able to have rows move from yellow section to white section. I don't think having two separate tables allows that.
I have one master excel file (masterexcel.xlsx) and 100 small excel files. The small excel files are saved as M30.xlsx, M31.xlsx, M32.xlsx, M33.xlsx, M34.xlsx....
I want to open the M30 file, copy a certain section and paste it into the master excel file, close the M30 file whilst saving the new information in a file called recording. Then open the next file which is M31, copy a certain section and paste it into the master excel file, close the M31 file and then open m32 and so on....
How do I create a loop for the files so it automatically opens the files in the order M30, M31, M32.......and performs the aforementioned actions.
I have attempted the following for m30 but i need to make it a loop for m31, m32, m33, m34, 35 and so on....
I am trying to rank records from multiple sections of a single array. Since there are over 100 sections I want to use a formula. Using the MATCH function I have the first row for each section of the array (Col D below). The psuedo code of what I'm trying to do is:
RANK(B1,Bfirst row of section:Bfirst row of next section -1)
Example (results in Column C):
A B C D 1 West 100 3 1 2 West 150 1 4 3 West 125 2 4 East 50 3 5 East 75 2 5 East 140 1
I will also need to increment the section as I complete each section of the array. Am I trying to do too much in a single cell??
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used) (Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group. The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B Document No Category 11000001 A 11000002 B 11000003 B 11000002 A 11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
