I currently have the formula =Countif(E5:E158,"YES"). This formula works great if when I dont filter, however, I need to filter through the data and I only want it to count the cells that have "Yes" when it is filtered, not just all the cells. I searched to forums and people keep referencing Subtotal() however that is counting all the cells and not pulling out the "Yes" inputs only.
View 2 RepliesI have a column of cells (say N7:N149) for which I would like to count the number of times text is visible, as some are blank. Normally I would go =COUNTA(N7:N149), but in this instance the cells are only blank because I have related them to adjacent cells and nominated "" if those adjacent cells are blank, therefore when I use my =COUNTA(N7:N149) formula it gives me a total of 143 (149-7).
View 7 Replies View RelatedI am trying to count all devices by model on sheet1 (FY13 4th QTR Meter Reads) into cell B524. The range is D2:D519.
Where I run into trouble is when I filter the data by Campus, I only want excel to count the number of devices for the model listed (A524) and place it into B524 for the visible rows.
The current formula I'm using is:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(D2:D519,ROW(D2:D519)-MIN(ROW(D2:D519)),,1))*D2:D519=A524)
I have a spreadsheet that includes a column with location names and a column with location numbers. What I need to do is count the visible unique numbers and names (seperately) in a certain column when using a filter. I have found the formula to count the unique values and a formula to count the visible cells, but not a formula that does both.
View 5 Replies View Relatedi need some formula, how to count data with 2 criteria: 1. data is visible cell only and; 2. data is ignore zero number/blank...
i have using subtotal but not fully work....
I want to count cells that contain specific text but multiple criteria. For example in range B4:B12 I want to count the cells that contain the word 'daily' AND the word 'weekly'. Each cell in the range contains one word.
View 5 Replies View RelatedI can't seem to get a formula to work. I am trying to count the number of times "EE" shows up in a range only if "CR" is listed in that row within another range. For simplicity Column A has a list with the following values scattered from A2 through A100: CR, LT, ST, DI. Column B has a list with the following values scattered from B2 through B100: EE, EF, EG.
I need to know how many EE's are listed in column B if CR is on the same line in column A.
I need to formula to count the number of cells that meet the criteria below,
Find the letters 'AT' in some part of the cell and a blank cell next to it...
Doing a different formula for each, doesn't bring out the correct figure.
Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
I have a spreadsheet with a lot of hidden rows in.
How can I do a count that only counts information in the visible cells?
I'm trying to use the count if function in VBA to get the number of cells in a range that have a "1" as their value.
The code I have is:
variable = Application.WorksheetFunction.CountIf(Range("Q5:Q" & FinalRow).SpecialCells(xlCellTypeVisible), "1")
And it's not working.
I would like to count all of the cells in a filtered range which contain specific text. These cells will also contain numbers.
The cells either contain one of the following
EXA 130
130
EXB 130
The number could be any number (not just 130) the text will only be EXA or EXB
So I am looking for the number of cells in a filtered range (visible cells) which contain EXA (plus any number)
SUMPRODUCT(SUBTOTAL(102,OFFSET(X8:X3000,ROW(X8:X3000)-MIN(ROW(X8:X3000)),,1--(X8:X3000,"*EXA*")
The above doesn't work and I have attempted lots of variations of this with no luck.
I have a worksheet with 26 columns of financial data. ACTUAL and BUDGET for each month and year totals for ACTUAL and BUDGET. I've provided the user with the ability to hide months they don't need to see during their current session. For example, if they are working on May, they may choose to hide June through December.
A user has requested Year To Date totals for ACTUAL and BUDGET. I thought this would be relatively simple. Just add two more columns and add up the visible cells.
I got this function from the Microsoft website and it works if I don't add criteria:
I have attached a sample sheet. Can someone be kind enough to teach me how to count unique numbers of visible cells ( I would be applying filter in the table) in textbox 1; and subtotal of the visible list in textbox 2?
Right now the range to count unique numbers is set to A2:A15, but I want to be able to change that range to other ranges, like B2:b100, etc. I do not know VB.
I am trying to count only visible cells where column AB = Active.
This is what I am currently have .
SUMPRODUCT(SUBTOTAL(3,AB2:AB1000),AB2:AB1000, "Active"))
I would like to select the visible cells, and then count down 50 rows in column A - is this possible?
I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.
View 11 Replies View RelatedI created a spreadsheet a while ago filled with data. It's password protected so nobody but me can edit it. But when I open it, I see only gridlines and no data. If I click on a cell I can see the contents up in the Formula Bar, but the sheet itself is blank. I've sent it via attachment to other people and they are able to view it, so it seems my Excel settings are doing something to me. I've tried so many things, but can't seem to work it out.
The text color is NOT white, the background is not the same color as text, etc. I dont know what else to try!!
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI know you can select all cells with a formula.
I know you can select all cells with constants
What about selecting all visible text (and results of a formula) on a page?
How do I modify the following formula to work for visible cells only:
=IF(J2=J1,K1+1,1)
For your information the formula is filled through K2:K2122
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
. AutoFilter Field:=1, Criteria1:="To be capped" 'TYPE
. AutoFilter Field:=29, Criteria1:="OPEN" 'STATUS
.columns(1).Offset(1,0).Resize(rng.Rows.Count - 1,1).SpecialCells(xlCellTypeVisible).Value = "Capitalised"
I want my macro to transform the cells whom values are visible into pure value no formula "behind them". I have simple multiplication formulas in those cells. If The result of a multiplication is 0 and I format that cells to not show me that 0 with "0.000;-0.000;;@" the macro still deletes the formula from that cell.
[Code] .....
I have used the following Formula to count the number of times that ABC occurs in red text within the listed range, and it works fine
=PERSONAL.XLS!CountByColorText($G$4:$R$211,3,TRUE,"ABC")
I now want to count the number of times that (F) occurs in red text within the listed range, the difference being that (F) is always only the last three digits in the cell eg ABC (F)
I have tried this formula =PERSONAL.XLS!CountByColorText($G$4:$R$211,3,TRUE,"*(F)*")and get 0, which is incorrect
Greetings respected EXCEL professionals. I am working an a project and I need your assistance. Kindly refer to the attached text file - which is a download of a BANK STATEMENTwhich came as text file. I want Excel to gather the information in the text file and put it in the cells. I then want to count the amount of all instances of certain descriptions.
For example, Excel would go down the description column and detect all instance of "EOD" (and ignore the varying string behind it) and put the total next to a cell titled simply "EOD". It would do similar detecting, calculating, and posting for the other descriptions ("DEPOSIT", "CASH", etc.) - again, Excel would only pay attention to the first few words of the description and just ignore any variables that occur in the same category.
I AM A NOVICE. I tried pasting the text file onto the spreadsheet with not too good results. But even when I tried to just have Excel count all occurances of "EOD" using the SUMPRODUCT function, I got a "VALUE!" error - I realized this is because there are texts such as "Amount" in the column containing the values.
I am looking to create an Excel sheet that can manage the times of access of a certain location. The information is set in a way that there are several rows, and the rows for the time I am keeping track of are in the Row "I". I need to get a count of how many people accessed the location each hour.
I have managed to do this using the following formula:
=COUNTIF(I:I,">=12:00:00")-COUNTIF(I:I,">13:00:00")
This gives me the Count for 12:00pm to 12:59pm. However, COUNTIF can only handle one variable, and I need to put a second variable in it. In Row B, there are several different states. For the most part, they are numbers, but occasionally, there are two separate occurances that I am not supposed to count with the others. I do have to count them separately, however:............
I have an excel file with 1000 of records for eg.
Date INITIALS CATEGORYACATEGORYB
31-Dec-07MTSVIN
01-Jan-08MSSVDI
04-Jan-08MORSKH
31-Jan-08MPSVHI
02-Feb-08MPRSIN
03-Feb-08MPVSIN
02-Jan-08MSRSIN
03-Mar-08MSKSKI
i want to count the datas
1) SELECTING IN THE SPECIFIED DATE RANGE (e.g from 1st jan to 31st Jan)
2) SELECTING MULTIPLE CRITERIA IN B COLUMN (MP & MS)
3) SELECTING MULTIPLE CRITERIA IN C COLUMN (SV & RS)
4) SELECTING MULTIPLE CRITERIA IN D COLUMN (IN & HI)
My colleagues tried countifs in excel 2007 but i have 2003. i want to specify all the four criteria in a single function to achieve my result (IN EACH MULTIPLE CRITERIA)