I have got differnt series data in Data Sheet and there is another sheet named Query Sheet where I want to run query to get data as per its level and required count which I jot dow in query sheet in cols a2 and 2.
View 9 RepliesVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View Relatedi want to add '-' to my data. Refer to my attachment, i donnot how to explain.
View 2 Replies View Relatedhow to count of data for "item column" this example..
name------------item---------expected desired (count)
john-------------title1----------------3
-------------title3
-------------title2
liza-------------title4-----------------1
marcos----------title2----------------2
----------title1
I'd like to do this without having to write a macro and am looking at a possible worksheet function (or combination of functions) that someone could reccomend to get this done.
- I have a tab labelled "Data", in this tab there is a column (lets say C) with dates (in mm/dd/yy format)
- Then on another tab ("Summary") I have a table with each row of column A being the first day of every month (same format).
I want a count of all the dates in "Data" column C that fall between the date on "Summary" A1 and "Summary" A2 and I want to dump this in "Summary" B1.
I've tried COUNTIF, I've tried converting the date to a number, not sure what else to do or if it's even possible.
I have a spreadsheet with multiple coulmns of data with rows which equate to each site location.
Basically I am after searching one column which says "Earth Rods Fitted" which is located in Column K which goes from K4:K767
In each the rows its either yes or no answer.
So the search would count number of "no" entries in column K.
But then it would search also on column Y (Y4:Y767) for a range of values of risk assessment.
So in column Y you could have each row with different assessment risk score from 0-300
So my search would need to count coloumn K for no earth rods fitted and then count within this range the number of cells in column Y which have risk score say between 200 to 400.
Column K Coulumn y
Earth Rods Fitted Risk Score
No 350
Yes 55
No 222
No 90
So in above case there is 3 enries with no earth rods in column K and in Column Y we are counting rows which have a value in range of 200-400 which above there is 2 entries. So basically I know there is 3 sites needed doing and my worst to based on risk is the two which are 350 and 222.
I have messed around with COUNTIF functions which I can search column K ok, but doing the range search on y in conjuction with K I am finding hard. Someone mentioned use Vlookup but not sure how to do it.
I'm working with a large database with hundreds of values that I need to have a table that looks like this:
A B C D E No class code Total 1.89 1.9-4.99 5 5.01-10 10.01-20 20.01-30 30.01-45 45.01-60 60.01-80 80.01-100 100.01-130 130.01-150 150+
I need each category to read another workbook page and count anything in x-price category with y value (being the A,b,c,d,e, or null)
Check out the attached worksheet, I would like to count the x's entered in a row and which column the x was entered in.
I need to know how many times an x occurs in each row under each column heading throughout the year.
I have a spreadsheet (>10,000 rows) with data referring to a grid cell map. Each grid cell on the map has an ID and associated data. About 10% of the grid cells have duplicate records, but with different data. I need to produce a spreadsheet with a single record for each grid cell that contains the data from each of the duplicate grid cells. Some occurrences may be >2. Example below.
Current
[TABLE]Grid#;Data
1;a
1;c
2;b
3;a
4;b
4;c
5;d
5;d
5;f
[/TABLE]
Needed
[TABLE]
Grid#;Data1;Data2;Data3
1;a;c
2;b
3;a
4;b;c
5;d;d;f
[/TABLE]
I am working on a set of Books to be published together. I am attempting to count the number of times a Book contains a glossary word that only appears once in the whole series. Conceptually I need to check if a word in A1 == any word in Sheet2 A:A, if so then does the value in Column B == 1, if so increase count by 1; if not proceed to A2 == Sheet2 A:A, and so on.
If this were a basic program I would do as follows:
C==2 **place count
s==size(A:A) ** check for length of column A (which I know is 179)
if C<=s
match (A'C', Sheet2 A:A)
if B'C' = 1
COUNT == COUNT + 1 ** COUNT is the number of times a book contains a word that only appears in that book.
Else
[Code]...
Here is a sample set up
Screen.jpg
I am trying to exclude unusable data from my analysis. I have flagged data in the flag column on sheet 1 by a "1". A "0" is good data. On sheet 2, I have counts for the amounts of a certain code per partner. I used a sumproduct formula for the counts, but now I want to exclude all data with a flag "1".
View 4 Replies View RelatedI'm looking for a formula that shows one piece of data but only if another criteria is met. Eg Column A1:A:100 show a piece of paperwork has been issued and column E1:E100 show the area that it's been issued to (North, South, East, Central)
I have a blank work sheet showing various % of things being late as a whole but also want to break this down into the four areas.
I have a need for a formula that is able to count the data in column that coresponds to data in another column.
Example work sheet attahced for a quikie look.
I need a formula that i can put in cells that can count datas automatically each month. The data that i have is huge and it updates everyday. As an example i will explain it simply.
Lets say i have a list of product groups in column A. Column B is the date where the samples arrived, Column C is the approval, Column D is the sending date.
I probably need to post a picture of the table: [URL]...
sample workbook: Attachment 197668Attachment 197668
So as you can see, i need to a formula to count the percentage of "approved samples", "not approved samples" and so on (for month december)
The approved sample for month december should have these requirement: If the date of arrival is in December 2012, if the approval says "approved" and NOT EMPTY,if the date of sending is NOT EMPTY.. So from the table, the answer is 2.
The percentage should be the 2, divided by all samples (Telephone) arrived with approval, doesnt matter if the date of sending is empty or not. (which is 4)
I would want a formula that can do this automatically monthly, so i dont need to do the formula time and again.
I'm trying to get a count of cells that have a range of data for instance I
want a count of cells that have data between 10 - 20.
I have a list of data, integer values ranging from 0 to 36. Imagine a Roulette wheel. The list is long, with over one hundred data points. I would like to view the first 14 data points, and count how many times each value occurs. How many 0's? How many 1's? How many 2's?...How many 36's?
Obviously, many values will have 0 occurrences. Most will have 1 occurrence, some 2, and maybe one or two will have 3 occurrences. I doubt we will see a value with 4 or more occurrences, but it is possible. With this accomplished, I will then note the results. So, that accomplishes the first 14 data points, call them 1-14.
Then, I want to move down the list 1 data point, and repeat the process. So, here I am looking at data points 2-15. Basically, it's the same set of data, with the first point missing, and a new point added on. I will then note the results. I want to continue doing this until the last 14 are viewed.
How to count colored cells in set of data..
View 3 Replies View RelatedI need an equation that will return a 1 in column F if data is available (cell is populated) in 2013 or last two years (2012 & 2013) or last three years (2011 & 2012 & 2013) or last four years or last five years. A zero counts as data.
Data is set up as:
Years in columns
2009
2010
2011
2012
2013
Count
product 1
34
32
33
31
35
1
[Code] ......
i have some formula but not really work,
Code:
=IF(a2"",COUNTIF($a$2:$a$7,a2))
for example :
name
title
expected result (count)
a
x1
3
x5
x3
[code]....
I'm trying to count number of rows with Data within a Range. i.e.
CatA = Range("A1:A15")
CatB = Range("A20:A35")
I want to know how many rows in range CatA have Data and how many rows in CatB have Data etc.
I've have two cell with data as below:
CELL1: X1, X2, X5, X7, X8, X12
CELL2: X2, X5, X12
My question:
1. using macro to identify different data in the cell using color (for same data will be blue
and different data will be red).
2. How to count the word in the cell (sample CELL1: after
count will become 6 words)
I want to be able to count unique rows of data.
I have three columns (A) has a date (B) has the name of a person and (C) has an audit type.
I know I need an array but not sure how to structure it for 3 columns
DateNameAudit type01/04/2008DavidCDM01/04/2008John1 in 1030/04/2008Bill1 in 1001/05/2008DavidVehicle01/05/2008DavidVehicle01/05/2008JohnCDM
The answer for these 3 columns is 5. Rows 4 and 5 are the same so are only counted once.
I can get the arrray to count unique items in the whole range and in a column but not for each row.
I have a feeling this is going to obvious but I can't work it out.
I have a column on sheet with has some data. I want to know: How many unique data has my column. If I use auto filter I can count it in list. But how can I do it with macros? I don’t want to make a cycle because it will takes me a lot of time…..
View 9 Replies View RelatedIn a column I have loads of numbers like this except there are 5000 of them.
3
2
0
0
0
0
2
0
3
0
0
2
0
9
how could i sort it into another column so it stays in the same order but counts the 0 values so it would look something like this.
3
2
0 (x4)
2
0 (x1)
3
0 (x2)
2
0 (x1)
9
I have excel file in the below format.
Sheet1 ABC1NamegroupGroup22A A13AA 4A B25BB 6CC2 7AC4 8D 9E D1 Excel tables to the web >> Excel Jeanie HTML 4
I want count data Based on Group.
The answer is below.
Sheet1 ABCDEF11NameaBCDBlanks12A211 13B 1 14C 1 15D 116E 1 Excel tables to the web >> Excel Jeanie HTML 4
1. Count of Unique Print Customers
2.Total of Print Revenue
3.Count of Unique Online Customers
4.Total of Online Revenue
5.Count of Customers advertising in both Print and Online
6.Total Online and Print Revenue
I've looked at the various examples in a search of topics simillar to my topic but I still can not get thsi to work.
I have a work book that contains 2 sheets
Sheet1 is called RawData of Multiple columns
Sheet2 is a quick report basded on Sheet1 data.
I need to find a way to do counts where 2 criteria are met.
Example.
Count the number of Times the phrase Major Victory appears in column M
( Range M1 to M50 ) of Sheet1 IF the value in Column L ( Range L1 to L50 ) of Sheet1 = USA
I tried this:
=COUNTIF(RawData!M1:M50,B1( AND(RawData!L1:L50=$A1)))
I am using B1 and A1 ( from Sheet2 ) as search criteria
but it gave me 0 ( and I know this is wrong ).
Based on the reading I did on simillar topics it appears that I cannot use CountIF in this case.
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
View 2 Replies View RelatedI am looking for a formula to count 2 blank cells (and return the value as 1 rather than two) but only when the cell preceding has data in it. eg in A11 there is data but in A12 & A13 it is empty = 1. PS If you are on the boards Jim I will email you an update when I get home tonight.
View 8 Replies View Relatedmacro that takes the number data and if it is the same number as in the previous row(s) just delete the extra number(s). It also needs to put in a factor in the next column of how many times the number was the same. For example:
Number Factor
5.67 1
5.70 1
5.77 1
5.77 1
5.77 1
5.77 1
Would become
Number Factor
5.67 1
5.70 1
5.77 4
I tried to make this question as clear as possible.